{"title":"MMX Performance","description":"","products":[{"product_id":"mmx-performance-bmw-b58-b57-stainless-steel-oil-filter","title":"MMX Performance BMW B58 \/ B57 Stainless Steel Oil Filter","description":"\u003cp\u003eThe MMX Performance BMW B58 \/ B57 Stainless Steel Oil Filter is a precision-engineered solution designed to eliminate a well-documented failure point found in factory paper oil filters. On BMW’s B58 and B57 3.0L engines, the OE paper filter can collapse or separate during servicing, leaving debris lodged in the oil filter housing and often requiring costly extraction or complete housing replacement.\u003c\/p\u003e\n\u003cp\u003eThe MMX stainless steel oil filter permanently resolves this issue by replacing the fragile paper element with a high-flow, pleated stainless steel micronic filter mesh. Constructed from medical-grade material, the filter provides consistent filtration down to 20 microns, offering superior protection compared to traditional paper filters.\u003c\/p\u003e\n\u003cp\u003eIn addition to improved filtration, the stainless steel design delivers up to five times the oil flow of comparable paper elements. This increased flow supports stable oil pressure, improved lubrication efficiency, and enhanced engine protection under both daily driving and high-performance conditions.\u003c\/p\u003e\n\u003cp\u003eUnlike disposable filters, the MMX oil filter is fully reusable and designed to last the lifetime of the vehicle when properly maintained. By eliminating the risk of filter collapse and debris contamination, it protects critical engine components such as bearings and VANOS systems from potential damage.\u003c\/p\u003e\n\u003cp\u003eCompatible with both the factory oil filter housing and upgraded billet housings, this stainless steel filter provides a long-term solution for enthusiasts seeking reliability, performance, and cost savings over repeated service intervals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMMX Performance stainless steel oil filter for BMW B58 and B57 engines\u003c\/li\u003e\n\u003cli\u003eReplaces factory paper oil filter element\u003c\/li\u003e\n\u003cli\u003eHigh-flow pleated stainless steel micronic filter mesh\u003c\/li\u003e\n\u003cli\u003eFilters contaminants down to 20 microns\u003c\/li\u003e\n\u003cli\u003eUp to five times greater oil flow compared to paper filters\u003c\/li\u003e\n\u003cli\u003eHelps maintain stable oil pressure and lubrication efficiency\u003c\/li\u003e\n\u003cli\u003eEliminates risk of filter collapse and housing damage\u003c\/li\u003e\n\u003cli\u003eReusable design for long-term cost savings\u003c\/li\u003e\n\u003cli\u003eCompatible with factory oil filter housing and billet housing upgrades\u003c\/li\u003e\n\u003cli\u003eDirect replacement with no modifications required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW models equipped with B58 3.0L petrol engines\u003c\/li\u003e\n\u003cli\u003eBMW models equipped with B57 3.0L diesel engines\u003c\/li\u003e\n\u003cli\u003eToyota Supra 3.0 (B58 engine)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/mmr-performance-bmw-b58-b57-billet-oil-filter-housing-cap?srsltid=AfmBOore7hROAUKly_rOMn6kh4c4LQSw0noqf_HYsJH3et0cZlCQMq_T\" target=\"_blank\"\u003eMMX Performance BMW B58 \/ B57 Billet Oil Filter Housing Cap\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/mmr-performance-bmw-b58-b57-lifetime-oil-change-service-kit?pr_prod_strat=pinned\u0026amp;pr_rec_id=911cd7e5c\u0026amp;pr_rec_pid=7421865066692\u0026amp;pr_ref_pid=7401785131204\u0026amp;pr_seq=uniform\" target=\"_blank\"\u003eMMX Performance BMW B58 \/ B57 Lifetime Oil Change Service Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSKU: MMR17-1502\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in the UK\u003c\/li\u003e\n\u003cli\u003eReusable filter must be cleaned thoroughly at each oil change\u003c\/li\u003e\n\u003cli\u003eCleaning requires solvent and compressed air (inside-out method)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089028346138,"sku":"MMR17-1502","price":81.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/mmx-b58-b57-stainless-steel-oil-filter-high-flow-white-background.jpg?v=1776360525"},{"product_id":"mmx-performance-bmw-wheel-stud-kit-m14x1-25","title":"MMX Performance BMW Wheel Stud Kit - M14x1.25","description":"\u003cp\u003eThe MMX Performance BMW Wheel Stud Kit – M14x1.25 is a purpose-built upgrade designed to improve wheel installation, safety, and long-term reliability. By replacing factory wheel bolts with a stud and nut conversion, this system allows the wheel to be guided onto fixed studs, eliminating the difficulty of aligning and threading bolts while supporting the weight of the wheel.\u003c\/p\u003e\n\n\u003cp\u003eThis upgrade significantly reduces the risk of cross-threading and makes wheel installation faster and more precise, especially when running wider wheels, wheel spacers, or performing frequent wheel changes for track use or seasonal setups. The stud conversion also provides increased thread engagement compared to traditional wheel bolts, helping distribute load more evenly across the hub for improved clamping force and stability under demanding driving conditions.\u003c\/p\u003e\n\n\u003cp\u003eEach stud is manufactured from heat-treated high-strength steel and precision-machined for consistent fitment and durability. Finished in a corrosion-resistant coating, the MMX stud kit delivers long-term performance while maintaining a clean OEM+ appearance. Designed for compatibility with both OEM and aftermarket wheels, this kit is configured with conical seat lug nuts, making it ideal for most aftermarket wheel applications.\u003c\/p\u003e\n\n\u003cp\u003eAvailable in multiple stud lengths to accommodate different setups, the MMX Performance BMW Wheel Stud Kit – M14x1.25 provides a versatile solution for enthusiasts seeking improved functionality, safety, and ease of maintenance.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMMX Performance BMW wheel stud and nut conversion kit – M14x1.25 thread\u003c\/li\u003e\n\u003cli\u003eConverts factory wheel bolts to stud and nut system\u003c\/li\u003e\n\u003cli\u003eConical seat configuration for aftermarket wheel compatibility\u003c\/li\u003e\n\u003cli\u003eManufactured from heat-treated high-strength steel\u003c\/li\u003e\n\u003cli\u003eImproved thread engagement for enhanced clamping force\u003c\/li\u003e\n\u003cli\u003eSimplifies wheel installation and removal\u003c\/li\u003e\n\u003cli\u003eReduces risk of cross-threading during wheel changes\u003c\/li\u003e\n\u003cli\u003eIdeal for track use, frequent wheel swaps, and spacer setups\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant finish for long-term durability\u003c\/li\u003e\n\u003cli\u003eMaintains OEM+ fitment with motorsport-inspired functionality\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eAvailable Configurations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e70mm Stud Length – Recommended for no spacers or up to 10mm spacers (SKU: MMR37-1501-70T)\u003c\/li\u003e\n\u003cli\u003e80mm Stud Length – Recommended for 10mm to 20mm spacers (SKU: MMR37-1501-80T)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eVehicle Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll BMW and MINI models with M14x1.25 wheel thread\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eRecommended Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/mmx-performance-aluminum-locking-wheel-nut-set-m14x1-25?variant=44558315192516\" target=\"_blank\"\u003eMMX Performance Aluminum Locking Wheel Nut Set – M14x1.25\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSKU: MMR37-1501-70T (70mm), MMR37-1501-80T (80mm)\u003c\/li\u003e\n\u003cli\u003eConical seat lug nuts – designed for most aftermarket wheels\u003c\/li\u003e\n\u003cli\u003eEnsure correct seat type for your wheel application before installation\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in the UK\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"70mm (Up to 10mm Spacers)","offer_id":52089028378906,"sku":"MMR37-1501-70T","price":204.32,"currency_code":"USD","in_stock":true},{"title":"80mm (Up to 20mm Spacers)","offer_id":52089028411674,"sku":"MMR37-1501-80T","price":204.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/mmx-bmw-wheel-stud-kit-m14x1-25-conical-seat-white-background.jpg?v=1776360525"},{"product_id":"mmx-performance-f8x-m2-m3-m4-rp650-performance-brake-pad-set-rear","title":"MMX Performance F8X M2 \/ M3 \/ M4 RP650 Performance Brake Pad Set - Rear","description":"\u003cp\u003eDrive your M-car hard and the chances are you’ve experienced brake fade at some point. That’s where our High Performance RP650 Brake Pads come in. A simple replacement for your factory pads using the standard braking hardware, they deliver a much higher resistance to high temperature fade. This makes them perfect for fast road driving and even occasional track day use, yet without any compromise in daily driving.\u003c\/p\u003e\n\u003cp\u003eA lot of our compound testing focused on developing a pad that finds that sweet-spot between excellent cold bite and high temperature fade resistance. The result is a medium aramid fiber compound with friction coefficient of 0.42mu in the temperature range of 450 – 650°C.\u003c\/p\u003e\n\u003cp\u003eThis compound is the secret to how our high-performance RP650 brake pads provide superior stopping power and reliable performance under even the most demanding conditions yet without requiring a warmup period - essential for cars that have to perform perfectly in daily driving duties yet stand up to the demands of fast road and occasional track use.\u003c\/p\u003e\n\u003cp\u003eAs well as outright performance, another key development focus has been around perfecting pedal feel - resulting in progressive braking with unparalleled pedal response underfoot. The slotted and chamfered construction ensures quiet and smooth braking.\u003c\/p\u003e\n\u003cp\u003eMeanwhile, our RP650 brake pads are designed to last longer than traditional brake pads, reducing the need for frequent replacements - even saving you money in the long run. This also means that the pads produce less dust than traditional brake pads, keeping your wheels cleaner and reducing the need for frequent cleaning.\u003c\/p\u003e\n\u003cp\u003eFinally, it’s a legal requirement in most countries for brake pads to carry ECE-R90 certification – yet many other aftermarket pads do not. Not only is this ECE-R90 standard essential for legality (and potentially your insurance validity), this regulation gives you the peace of mind that the pads are tested and approved for cold performance, speed, sensitivity, friction behavior, compressibility, shear and hardness. So, the pads will work just as well when cold as when up to full track temperatures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePerfect for fast road use\u003c\/li\u003e\n\u003cli\u003ePublic highway legal – R90 Approved\u003c\/li\u003e\n\u003cli\u003eWorks from cold – excellent cold bite and high temperature fade resistance\u003c\/li\u003e\n\u003cli\u003eSuitable for short use track days\u003c\/li\u003e\n\u003cli\u003eDue to bedding in material – bedding in happens naturally over the first 100-200 miles in urban driving\u003c\/li\u003e\n\u003cli\u003eQuiet and smooth braking \/ shimmed \/ slotted \/ chamfered construction\u003c\/li\u003e\n\u003cli\u003eResponsive pedal feel for progressive braking\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089028444442,"sku":"MMR27-0501R","price":217.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/53030271659_5d1c60894d_b.jpg?v=1776360524"},{"product_id":"mmx-performance-f2x-f3x-adjustable-front-sway-bar-end-link-kit","title":"MMX Performance F2X \/ F3X Adjustable Front Sway Bar End Link Kit","description":"\u003cp\u003eThe drop link attaches the front anti roll bar ends to the front damper. The OEM links were made the length they are for a reason - to compliment the standard ride height.\u003c\/p\u003e\n\u003cp\u003eSo when ride-height is changed the car will now be pulling your anti-roll bar ends up, pushing it out of its operating window, and forcing the link to sit at a sharper angle. With around 30mm of adjustable length, plus left \/ right threaded ends for easy length adjustment, the MMR Adjustable Drop Links will allow you to adjust back to zero preload on the Anti Roll Bar, allowing it to operate exactly as it should again.\u003c\/p\u003e\n\u003cp\u003eMotorsport-specification ball joint ends using high strength Teflon-lined steel mean much more direct response when turning in to corners. By replacing the soft rubber bushing in the factory links with these motorsport-spec ball joints, cornering and steering responses are immediately sharpened. Importantly, rubber dust boots are fitted to protect the joints from road dirt and salt accumulation.\u003c\/p\u003e\n\u003cp\u003eThe lightweight CNC-machined 6061-T2 Aluminum bodies themselves are finished with beautiful gloss Dark Anthracite anodized coating to look good, and stay looking good.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T6061 Aluminum\u003c\/li\u003e\n\u003cli\u003eAnodized in signature MMR Gloss black\u003c\/li\u003e\n\u003cli\u003eHeavy-duty ball joints to ensure a long life span\u003c\/li\u003e\n\u003cli\u003e290-330mm Adjustment range\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089028804890,"sku":"MMR24-1504","price":283.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/53349899789_acf8c368b4_b.jpg?v=1776360527"},{"product_id":"mmx-performance-bmw-billet-oil-filler-cap-s58-b48e","title":"MMX Performance BMW Billet Oil Filler Cap - S58 \/ B48E","description":"\u003cp\u003eThe MMR Performance billet oil filler cap for BMW S58 and B48E engines has been designed from the ground up in the UK, from a solid piece of billet aluminum. Each cap is designed to directly replace the OE cap, not merely stuck in place.\u003c\/p\u003e\n\u003cp\u003eEach MMR cap starts life as a solid billet of 6061 aerospace-grade aluminum. It's meticulously machined from this billet with the latest CNC 5-axis technology, before being polished, then gloss-anodized to stay beautiful year after year.\u003c\/p\u003e\n\u003cp\u003eAll MMR oil caps arrive pre-sealed and pre-installed with an OE spec valve and internal spring. No need to remove the assembly from your OE cap. A true plug and play solution. It has been designed to instantly give your BMW an under-bonnet boost in the aesthetic department, finished in a deep gloss black anodized finish.\u003c\/p\u003e\n\u003cp\u003eNever again will you worry whether you tightened your oil cap fully, as the internally sprung cap clicks hard and locks into place. This cap will ensure that you'll never again have the problem of 'weeping' oil leaks from the standard cap - a known issue with many of these engines as age and mileage causes them to deteriorate.\u003c\/p\u003e\n\u003cp\u003eIt joins an existing range of engine dress-up products for a complete under-bonnet transformation to your engine bay.\u003c\/p\u003e\n\u003cp\u003eThe carefully considered design gives ample surface grip area for your fingers, making installation and filling your engine oil that little bit easier.\u003c\/p\u003e\n\u003cp\u003ePlease check the underside of your factory oil cap for the OE part number. The MMR billet oil cap for the S58 and B48E fits OE Part Number 11128654637\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned in the UK\u003c\/li\u003e\n\u003cli\u003eCrafted from 6061 aerospace-grade aluminum\u003c\/li\u003e\n\u003cli\u003eFull OE cap replacement\u003c\/li\u003e\n\u003cli\u003eInternally sprung clip for secure and precise fit\u003c\/li\u003e\n\u003cli\u003eAnodized in MMR signature gloss black\u003c\/li\u003e\n\u003cli\u003eJoins existing range of MMR billet caps\u003c\/li\u003e\n\u003cli\u003ePre-installed factory spec Viton O-Ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePopular Applications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eG8X M2 \/ M3 \/ M4\u003c\/li\u003e\n\u003cli\u003eF97 X3M \/ F98 X4M\u003c\/li\u003e\n\u003cli\u003eF40 M135i\u003c\/li\u003e\n\u003cli\u003eF44 M235i\u003c\/li\u003e\n\u003cli\u003eMini Cooper JCW \/ GP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089029689626,"sku":"MMR03-1601","price":127.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/MMR-OFC-S58-1.jpg?v=1776360531"},{"product_id":"mmx-performance-bmw-mini-wheel-mounting-guide-pin","title":"MMX Performance BMW \/ MINI Wheel Mounting Guide Pin","description":"\u003ch1\u003eBMW \u0026amp; MINI Wheel Mounting Guide Pin – Precision Alignment Tool\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eWheel Guide Pin sold individually.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFitting alloy wheels to your BMW or MINI is now faster, safer, and more accurate with our precision-engineered \u003cstrong\u003eWheel Mounting Guide Pin\u003c\/strong\u003e. Designed to make wheel installation effortless—especially if you run spacers or have carbon ceramic brakes—this tool ensures perfect bolt alignment every time.\u003c\/p\u003e\n\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExact Wheel Alignment\u003c\/strong\u003e – Guides the wheel into place for quick and accurate bolt fitting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects Wheels \u0026amp; Brakes\u003c\/strong\u003e – Rounded, tapered end prevents wheel damage and reduces risk to brake rotors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Strength Construction\u003c\/strong\u003e – CNC-machined from lightweight yet durable \u003cstrong\u003e7075-T6 aluminum\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-Lasting Finish\u003c\/strong\u003e – Hard anodized in black for exceptional corrosion and wear resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Handling\u003c\/strong\u003e – Knurled grip for effortless threading plus a built-in hole for quick removal with a tool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlways Ready\u003c\/strong\u003e – Compact enough to store in your tool kit for roadside or track use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow It Works\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eScrew the guide pin into one of your hub’s bolt holes.\u003c\/li\u003e\n\u003cli\u003eLift and slide the wheel onto the pin—this perfectly aligns the bolt holes.\u003c\/li\u003e\n\u003cli\u003eInstall and tighten your remaining bolts with ease.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003ePerfect for BMW \u0026amp; MINI Owners\u003c\/h2\u003e\n\u003cp\u003eAvailable in \u003cstrong\u003etwo thread sizes\u003c\/strong\u003e to fit a wide range of models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eM12 x 1.5\u003c\/li\u003e\n\u003cli\u003eM14 x 1.25\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhether you’re a weekend track enthusiast or simply want stress-free wheel swaps at home, this Wheel Mounting Guide Pin is an essential tool for any BMW or MINI owner.\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"M12x1.5","offer_id":52089029558554,"sku":"MMR37-0002","price":28.06,"currency_code":"USD","in_stock":true},{"title":"M14x1.25","offer_id":52089029591322,"sku":"MMR37-0001","price":28.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/54731936090_5894e69bb3_b.jpg?v=1776360531"},{"product_id":"mmx-performance-f2x-f3x-front-control-arm-spherical-bearing-set","title":"MMX Performance F2X \/ F3X Front Control Arm Spherical Bearing Set","description":"\u003cp\u003eWelcome to the MMX Front Control Arm Spherical Bushings for the BMW F2x F3x platform — specifically BMW M135i, M235i, 335i, 435i, M140i, M240i, 340i and 440i. We make the products we run on our own vehicles, and this one delivers exactly what we expect from a true motorsport-grade solution.\u003c\/p\u003e\n\u003cp\u003eThese bushings are built to maintain precise wheel alignment under braking and hard cornering, both on the road and the track. By replacing the soft OEM rubber bushings — which deflect, wear, and fail under stress — we’ve eliminated the play and instability that hold back performance. What you get is sharper turn-in, improved steering feedback, and a more connected feel through the wheel and chassis.\u003c\/p\u003e\n\u003cp\u003eCrafted from anodized 7075 aluminum paired with stainless steel spacers to withstand tough road conditions. Inside, a strong spherical bearing ensures long-lasting performance and reliability, far beyond what lower-cost options can offer. To protect the bearing during install, we’ve included a 3D printed press tool for a safe and damage-free fit.\u003c\/p\u003e\n\u003cp\u003eThis upgrade helps preserve tire life and performance by keeping front toe stable under extreme conditions — meaning more grip, better tire temps, and less wear during aggressive driving.\u003c\/p\u003e\n\u003cp\u003eFitting Note: A hydraulic or fly press is required for installation. We recommend professional fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaintains front wheel alignment under heavy braking and hard cornering\u003c\/li\u003e\n\u003cli\u003eImproves steering feedback through the wheel and chassis\u003c\/li\u003e\n\u003cli\u003eIncreases steering response and overall driving stability\u003c\/li\u003e\n\u003cli\u003eEliminates deflection found in OEM rubber bushes\u003c\/li\u003e\n\u003cli\u003eEnhances turn-in sharpness by removing play in the suspension\u003c\/li\u003e\n\u003cli\u003eReduces tire wear and maintains optimal tire temperatures under load\u003c\/li\u003e\n\u003cli\u003eConstructed from anodized 7075 aluminum with stainless steel spacers\u003c\/li\u003e\n\u003cli\u003eHigh-strength spherical bearing for long service life and durability\u003c\/li\u003e\n\u003cli\u003eIncludes 3D printed press tool to protect bearing during installation\u003c\/li\u003e\n\u003cli\u003eComplete replacement for OEM rubber bushings\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF20 1-Series\u003c\/li\u003e\n\u003cli\u003eF22 \/ F23 2-Series\u003c\/li\u003e\n\u003cli\u003eF3X 3-Series\u003c\/li\u003e\n\u003cli\u003eF3X 4-Series\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089030148378,"sku":"MMR45-0501","price":389.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/54441731982_fc571b1062_b.jpg?v=1776360534"},{"product_id":"mmx-performance-wheel-spacers-bmw-e-series-hubcentric-spacer-kit","title":"MMX Performance Wheel Spacers | BMW E-Series Hubcentric Spacer Kit","description":"\u003cp\u003eUpgrade the stance, handling, and overall look of your BMW E-Series with the MMX hubcentric wheel spacers and bolt kit. Designed for BMW models using the M12x1.5, 5x120 bolt pattern, these lightweight aluminum spacers are a cost-effective way to achieve a wider, more aggressive stance while improving cornering stability and overall driving dynamics.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved stance and appearance:\u003c\/strong\u003e Achieve a flush fit with your wheel arches for a wider, more aggressive look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced handling:\u003c\/strong\u003e A wider track increases stability and cornering response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake and suspension clearance:\u003c\/strong\u003e Creates space for larger brake calipers or coilovers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-level precision:\u003c\/strong\u003e The hubcentric lip centers the wheel on the hub to reduce vibration and imbalance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e BMW E-Series models (M12x1.5, 5x120).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidths available:\u003c\/strong\u003e 12 mm, 15 mm, 18 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Aerospace-grade 7075-T6 aluminum for strength and durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHubcentric design:\u003c\/strong\u003e Retains OE center bore for exact fitment on factory or aftermarket wheels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware included:\u003c\/strong\u003e Each pair includes ten extended-length grade 10.9 carbon steel black wheel bolts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e \u003cstrong\u003eSold in pairs\u003c\/strong\u003e so you can choose different sizes front and rear to fine-tune stance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Choose Hubcentric MMX Wheel Spacers?\u003c\/h2\u003e\n\u003cp\u003eMMX hubcentric spacers use a precisely machined alloy spigot for accurate wheel centering and proper hub engagement. This reduces the likelihood of vibration and provides a safer, more stable driving experience. \u003cstrong\u003eNon-hubcentric spacers are not recommended\u003c\/strong\u003e for performance vehicles.\u003c\/p\u003e\n\u003ch2\u003eCare and Maintenance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse only pH-balanced, non-abrasive cleaners. Avoid acidic or alkaline products.\u003c\/li\u003e\n\u003cli\u003eWash with mild soap and water only. Do not use solvent-based or abrasive chemicals.\u003c\/li\u003e\n\u003cli\u003eAvoid commercial car washes that use harsh chemicals such as traffic film remover (TFR).\u003c\/li\u003e\n\u003cli\u003eBefore installation, ensure the spacer sits flat against the hub and wheel, and check wheel arch clearance at full left and right lock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e** This item is non-returnable **\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"12mm (24mm total track)","offer_id":52089030705434,"sku":"MMR37-0212","price":122.78,"currency_code":"USD","in_stock":true},{"title":"15mm (30mm total track)","offer_id":52089030738202,"sku":"MMR37-0215","price":129.33,"currency_code":"USD","in_stock":true},{"title":"18mm (36mm total track)","offer_id":52089030770970,"sku":"MMR37-0218","price":130.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/54774689653_39d1270a6c_b.jpg?v=1776360537"},{"product_id":"mmx-performance-bmw-f3x-n57-elite-series-panel-air-filter","title":"MMX Performance BMW F3X N57 Elite Series Panel Air Filter","description":"\u003cp\u003eSearching for the ultimate air filter for your 3.0L N57 BMW? Discover the MMX Performance Elite Series panel filter—a premium, tri-foam, direct OE replacement for BMW F-Series vehicles. Crafted with cutting-edge techniques and materials inspired by Formula 1, World Rally, and Touring Cars, this filter sets the benchmark for performance and innovation.\u003c\/p\u003e\n\u003cp\u003eThe same precision engineering, advanced technology, and meticulous attention to detail that define elite motorsport components are applied to our Elite Series filters. Designed for both road and competition use, they deliver unparalleled quality and performance.\u003c\/p\u003e\n\u003cp\u003eOur panel filter eliminates the airflow restrictions inherent in standard paper filters, enabling a significant boost in airflow to the turbo. Designed to fit seamlessly into the OE airbox, the MMX Performance foam filters offer outstanding filtration, immediate performance gains, and enhanced induction sound.\u003c\/p\u003e\n\u003cp\u003eCrafted to OEM standards for design, quality, materials, and durability, these filters provide a factory-perfect fit and long-lasting reliability.\u003c\/p\u003e\n\u003cp\u003ePut simply, we believe these are the best panel air filters you can buy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorthwhile increase in power and torque\u003c\/li\u003e\n\u003cli\u003eFitting is very straightforward and installed in around 10 minutes\u003c\/li\u003e\n\u003cli\u003eEasily returned to standard, should you ever wish\u003c\/li\u003e\n\u003cli\u003eSpecifically designed for the BMW N57\u003c\/li\u003e\n\u003cli\u003eKit complete with everything you need\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089031262490,"sku":"MMR01-3035","price":155.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/MMR01-30353.png?v=1776360542"},{"product_id":"mmx-performance-bmw-n54-n55-low-temperature-oil-thermostat","title":"MMX Performance BMW N54 \/ N55 Low Temperature Oil Thermostat","description":"\u003cp\u003eControl the oil temperature on your BMW N54 or N55 with our MMR Performance low oil temperature thermostat. By maintaining your oil temps between 90c - 110c, this is an essential modification for all high power or hard-driven cars, especially those used on track. Please note: only suitable for models from 2008 onwards.\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089031328026,"sku":"MMR17-0101","price":70.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/Artboard1.png?v=1776360541"},{"product_id":"mmx-performance-bmw-e-chassis-n54-performance-intercooler","title":"MMX Performance BMW E-Chassis N54 Performance Intercooler","description":"\u003cp\u003eKeep cool with the MMX Performance intercooler for the N54-powered 135i, 335i and 1M E8x \u0026amp; E9x models. Improve your power and torque output significantly through substantially reducing charge air temperatures by circa 20ºC versus OE from the super efficient bar and plate core construction. And with a 20% increase in core volume.\u003c\/p\u003e\n\u003cp\u003eWith the right modifications, the N54 straight-six is more than capable of producing substantial power, but the additional heat that generates is often enough to overwhelm the standard cooling setup, showing up as serious power losses during hard driving as air temperatures soar, and long recovery cool-down times needed.\u003c\/p\u003e\n\u003cp\u003eThe MMX Performance intercooler is a direct-fit replacement unit that uses a super-efficient bar and plate core specifically engineered to support maximum performance gains on BMW 135i, 335i and 1M models.\u003c\/p\u003e\n\u003cp\u003eThe high-flow optimised cast end tanks, combined with the enlarged core volume delivers average intake temperature reductions of around 20ºC and typically adds around 20bhp even when running standard boost pressure.\u003c\/p\u003e\n\u003cp\u003eOur development focussed on finding the ‘sweet spot’ of maximum IAT cooling versus minimum pressure loss. This has allowed us to achieve increased size without increased lag.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision TIG-welded throughout\u003c\/li\u003e\n\u003cli\u003e20%+ larger core volume\u003c\/li\u003e\n\u003cli\u003eEfficient bar and plate core\u003c\/li\u003e\n\u003cli\u003eTypical intake temperature reduction of 20ºC versus OE\u003c\/li\u003e\n\u003cli\u003eIncreases power and torque, even running standard boost pressure\u003c\/li\u003e\n\u003cli\u003eOE-style charge pipe connections for easy installation\u003c\/li\u003e\n\u003cli\u003eAnti-corrosive thermal black finish\u003c\/li\u003e\n\u003cli\u003eCan be installed in under an hour\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089031524634,"sku":"MMR05-0201","price":766.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/MMR05-02014.png?v=1776360542"},{"product_id":"mmx-performance-bmw-wheel-stud-kit-ball-seat-m14x1-25","title":"MMX Performance BMW Wheel Stud Kit – Ball Seat M14x1.25","description":"\u003cp\u003e\u003cstrong\u003eImportant Fitment Note:\u003c\/strong\u003e \u003cstrong\u003eThis kit is only for customers running aftermarket wheels that require Ball Seat nuts.\u003c\/strong\u003e Most BMW owners will need the \u003cstrong\u003eConical Seat\u003c\/strong\u003e nuts instead. Please verify your wheel seat type before ordering. Ball seat applications are rare and typically seen on some OZ and BBS wheels and certain replicas. See related products for the conical seat kit.\u003c\/p\u003e\n\u003ch3\u003eWhy Convert to Studs and Nuts\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFaster, easier wheel changes compared to factory wheel bolts\u003c\/li\u003e\n\u003cli\u003eReduces cross-threading risk and helps protect hub threads\u003c\/li\u003e\n\u003cli\u003eSupports changing spacer setups without running out of bolt thread engagement\u003c\/li\u003e\n\u003cli\u003eIdeal for vehicles that see regular track use or frequent wheel swaps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eM14x1.25 heat-treated high carbon steel studs with chrome plated finish\u003c\/li\u003e\n\u003cli\u003eBall seat lug nuts in a black gloss anodized finish\u003c\/li\u003e\n\u003cli\u003eTwo stud lengths available:\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e70mm\u003c\/strong\u003e: No spacers or up to 10mm spacers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80mm\u003c\/strong\u003e: 10mm to 20mm spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eExceeds OEM bolt strength for safety and durability\u003c\/li\u003e\n\u003cli\u003eMax vehicle weight rating: 2500 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRemove wheels and clean hub threads and the short ends of the new studs with a suitable solvent (e.g., brake cleaner). Ensure threads are free of dirt and grease.\u003c\/li\u003e\n\u003cli\u003eConfirm the stud shank passes cleanly through the brake disc holes and does not bottom on the disc.\u003c\/li\u003e\n\u003cli\u003eApply a thin coat of high-temperature threadlocker (Loctite Blue 2422 or equivalent, rated to 650°F) to the short end threads.\u003c\/li\u003e\n\u003cli\u003eUsing a 6mm Allen key, screw the short end of each stud into the hub until the shank seats. Do not overtighten. Tighten to around 30 ft-lbs (40 Nm).\u003c\/li\u003e\n\u003cli\u003eAllow approximately three hours for the threadlocker to cure fully.\u003c\/li\u003e\n\u003cli\u003eRefit wheels using a 19mm socket and torque the nuts to the factory specification for the original lug bolts.\u003c\/li\u003e\n\u003cli\u003eRecheck nut torque after about 30 minutes of driving once the assembly has reached operating temperature.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit is not a locking or security solution.\u003c\/li\u003e\n\u003cli\u003eDo not use acidic, alkaline, solvent-based, or abrasive cleaners on anodized nuts.\u003c\/li\u003e\n\u003cli\u003eUse only pH-balanced soap and water. Avoid commercial carwashes that use aggressive chemicals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSeat Type Guidance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall Seat:\u003c\/strong\u003e Rare in the aftermarket; confirm if your wheels specify ball seat nuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConical Seat:\u003c\/strong\u003e Most OEM and many aftermarket BMW wheels use conical seat nuts. See related products for the conical version.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e** This item is non-returnable **\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"70mm (Up to 10mm Spacers)","offer_id":52089031459098,"sku":"MMR37-1501-70B","price":204.32,"currency_code":"USD","in_stock":true},{"title":"80mm (Up to 20mm Spacers)","offer_id":52089031491866,"sku":"MMR37-1501-80B","price":204.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/54822158442_1d9115080a_b.jpg?v=1776360542"},{"product_id":"mmx-performance-g87-m2-lowering-spring-set-rwd","title":"MMX Performance G87 M2 Lowering Spring Set (RWD)","description":"\u003cp\u003eThe MMR Performance Lowering Spring Kit for the G87 M2 RWD is one of the most popular suspension upgrades available. It delivers the ideal blend of improved handling, enhanced aesthetics and excellent ride comfort.\u003c\/p\u003e\n\u003cp\u003eLowering the M2’s center of gravity noticeably sharpens chassis behavior by reducing body roll and improving stability without compromising everyday drivability. The carefully selected progressive spring rates maintain factory ride quality at slow speeds and actually feel smoother over uneven surfaces. When you push harder through the corners, the G87 responds with quicker turn-in, improved balance and a more connected driving feel.\u003c\/p\u003e\n\u003cp\u003eVisually, this upgrade instantly transforms the stance of the M2. Eliminating the excessive wheel arch gap creates a more aggressive, factory-finished look that complements the car’s performance character.\u003c\/p\u003e\n\u003cp\u003eGo lower or stiffer than these springs and the dampers will struggle to keep up, resulting in a harsh, bouncy ride. MMR’s rates and height settings are engineered specifically to work with the factory damper system so performance and comfort remain in harmony.\u003c\/p\u003e\n\u003cp\u003eFinished in MMR Metallic Gunmetal Grey, these springs are fully compatible with both standard and Adaptive M dampers.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized spring rates for sharper handling and improved road feel\u003c\/li\u003e\n\u003cli\u003eCompatible with factory Adaptive M and standard dampers\u003c\/li\u003e\n\u003cli\u003eLowers G87 M2 RWD by \u003cstrong\u003e30 mm front\u003c\/strong\u003e and \u003cstrong\u003e30 mm rear\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated in MMR Metallic Gunmetal Grey for long-term durability\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for \u003cstrong\u003eG87 M2 RWD\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089031557402,"sku":"MMR08-1602-G87","price":423.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/52438378967_caba461a14_b.jpg?v=1776360542"},{"product_id":"mmx-performance-g8x-m2-m3-m4-dual-differential-mount","title":"MMX Performance G8X M2 \/ M3 \/ M4 Dual Differential Mount","description":"\u003cp\u003eThe MMX Performance Dual Differential Mount is engineered to strengthen one of the most critical components of the BMW G8x drivetrain. Designed for the G87 M2, G80\/G81 M3, and G82\/G83 M4, this precision machined mount uses the factory secondary bush mounting point to improve differential stability under hard acceleration, spirited driving, and track use.\u003c\/p\u003e\n\u003cp\u003eBy adding a second support point, the mount increases rigidity, reduces unwanted differential movement, and sharpens driveline response. Installation is OEM fit with no cutting, drilling, or fluid changes required. It bolts directly to the factory differential while retaining the factory sump, and it is fully reversible so owners can return the vehicle to stock at any time.\u003c\/p\u003e\n\u003cp\u003eThe mount is compatible with OEM rubber differential bushes (33 31 6 899 168) as well as aftermarket polyurethane or solid bushings. By limiting excess movement of the differential, it also helps to prevent diff and CV seal weeping during high load driving.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUses the factory secondary bush mounting hole for added stability under load\u003c\/li\u003e\n\u003cli\u003eRequires a differential bushing to complete installation (OEM rubber, polyurethane, or solid options supported)\u003c\/li\u003e\n\u003cli\u003eDirect OEM fitment with no modification required\u003c\/li\u003e\n\u003cli\u003eFactory sump retained with no fluid draining necessary\u003c\/li\u003e\n\u003cli\u003eFits OEM rubber bush (33 31 6 899 168), polyurethane, or solid bushes\u003c\/li\u003e\n\u003cli\u003eReduces differential movement to help prevent diff and CV seal weeping\u003c\/li\u003e\n\u003cli\u003eImproves tyre traction, stability, and driver feedback\u003c\/li\u003e\n\u003cli\u003eCNC machined from 6061-T6 billet aluminium for strength and low weight\u003c\/li\u003e\n\u003cli\u003eReversible installation so the car can be returned to stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW G87 M2 (2023+)\u003c\/li\u003e\n\u003cli\u003eBMW G80 \/ G81 M3 (2021+)\u003c\/li\u003e\n\u003cli\u003eBMW G82 \/ G83 M4 (2021+)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChassis Codes\u003c\/h3\u003e\n\u003cp\u003eG80, G81, G82, G83, G87\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089031721242,"sku":"MMR55-1606","price":546.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/54811366456_47a8ba020e_b.jpg?v=1776360544"},{"product_id":"mmx-performance-bmw-n20-n5x-s55-billet-oil-filter-housing-cap","title":"MMX Performance BMW N20 \/ N5X \/ S55 Billet Oil Filter Housing Cap","description":"\u003cp\u003eThe MMX Performance BMW Billet Oil Filter Housing Cap is a precision-engineered upgrade designed to eliminate one of the most common failure points in BMW engines. Factory plastic oil filter housings are known to crack during routine servicing, often leading to frustrating oil leaks and repeated replacements. This billet solution replaces the fragile OE component with a durable, long-term alternative.\u003c\/p\u003e\n\n\u003cp\u003eMachined from a solid block of 6061 aerospace-grade aluminum using advanced 5-axis CNC technology, the MMX housing delivers exceptional strength, precision, and reliability. Finished in a gloss Midnight Black anodized coating and laser-etched with the MMX logo, it offers a clean OEM+ appearance while resisting corrosion and wear over time.\u003c\/p\u003e\n\n\u003cp\u003eBeyond durability, the MMX housing features an integrated pressure control oil bypass, eliminating the need to transfer the factory plastic bypass valve. This reduces the risk of damage during installation and ensures consistent oil system operation. Supplied with a factory-spec O-ring, the cap provides a proper seal and direct OEM-level fitment.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is straightforward and best completed during an oil service. Once installed, the MMX billet oil filter housing cap delivers long-term reliability, eliminating the risk of cracking and oil seepage associated with the factory component.\u003c\/p\u003e\n\n\u003cp\u003eA functional and aesthetic upgrade, this billet oil filter housing cap is engineered for durability, precision, and consistent performance across both daily-driven and high-performance applications.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMMX Performance billet oil filter housing cap for BMW\u003c\/li\u003e\n\u003cli\u003eDirect replacement for factory plastic oil filter housing\u003c\/li\u003e\n\u003cli\u003eCNC-machined from 6061 aerospace-grade aluminum\u003c\/li\u003e\n\u003cli\u003eAdvanced 5-axis machining for precise fitment\u003c\/li\u003e\n\u003cli\u003eIntegrated pressure control oil bypass – no transfer of OE valve required\u003c\/li\u003e\n\u003cli\u003eGloss Midnight Black anodized finish with laser-etched MMX logo\u003c\/li\u003e\n\u003cli\u003eEliminates risk of cracking and oil leaks associated with OE plastic housing\u003c\/li\u003e\n\u003cli\u003eIncludes factory-spec O-ring for proper sealing\u003c\/li\u003e\n\u003cli\u003eDurable, corrosion-resistant construction for long-term use\u003c\/li\u003e\n\u003cli\u003eSimple installation during routine oil service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eVehicle Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW models equipped with N20, N52, N54, N55, and S55 engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSKU: MMR03-0101-BL\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in the UK\u003c\/li\u003e\n\u003cli\u003eDirect OE replacement – no modifications required\u003c\/li\u003e\n\u003cli\u003eProlonged exposure to extreme heat may affect anodized finish appearance\u003c\/li\u003e\n\u003cli\u003eThis does not impact performance or functionality\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089032016154,"sku":"MMR03-0101-BL","price":142.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/mmx-bmw-billet-oil-filter-housing-cap-n20-n55-s55-black-anodized-white-background.jpg?v=1776360549"},{"product_id":"mmx-performance-f8x-s55-f1x-s63-elite-series-panel-air-filter-set","title":"MMX Performance F8X (S55) \/ F1X (S63) Elite Series Panel Air Filter Set","description":"\u003cp\u003eSearching for the ultimate air filter for your 3.0L S55 BMW? Discover the MMX Performance Elite Series panel filter—a premium, tri-foam, direct OE replacement for BMW F-Series vehicles. Crafted with cutting-edge techniques and materials inspired by Formula 1, World Rally, and Touring Cars, this filter sets the benchmark for performance and innovation.\u003c\/p\u003e\n\u003cp\u003eThe same precision engineering, advanced technology, and meticulous attention to detail that define elite motorsport components are applied to our Elite Series filters. Designed for both road and competition use, they deliver unparalleled quality and performance.\u003c\/p\u003e\n\u003cp\u003eOur panel filter eliminates the airflow restrictions inherent in standard paper filters, enabling a significant boost in airflow to the turbo. Designed to fit seamlessly into the OE airbox, the MMX Performance foam filters offer outstanding filtration, immediate performance gains, and enhanced induction sound.\u003c\/p\u003e\n\u003cp\u003eCrafted to OEM standards for design, quality, materials, and durability, these filters provide a factory-perfect fit and long-lasting reliability.\u003c\/p\u003e\n\u003cp\u003ePut simply, we believe these are the best panel air filters you can buy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorthwhile increase in power and torque\u003c\/li\u003e\n\u003cli\u003eFitting is very straightforward and installed in around 10 minutes\u003c\/li\u003e\n\u003cli\u003eEasily returned to standard, should you ever wish\u003c\/li\u003e\n\u003cli\u003eSpecifically designed for the BMW S55\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eKit complete with everything you need\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089032343834,"sku":"MMR01-HMP-814","price":158.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/MMR01-HMP-8142.png?v=1776360549"},{"product_id":"mmx-performance-g8x-m2-m3-m4-high-capacity-baffled-differential-sump-oil-pan","title":"MMX Performance G8X M2 \/ M3 \/ M4 High-Capacity Baffled Differential Sump \/ Oil Pan","description":"\u003cp\u003e\nUpgrade your G8X M2, M3, or M4 (RWD or xDrive) with a precision-engineered differential solution built for track enthusiasts who demand reliability, efficiency, and consistent performance. The MMX High-Capacity Baffled Differential Sump is designed to keep your drivetrain running cooler, better lubricated, and more stable under aggressive driving conditions by increasing fluid capacity, improving oil control, and enhancing heat dissipation.\n\u003c\/p\u003e\n\n\u003cp\u003e\nThis upgraded sump increases differential oil capacity by up to 2 litres (2.10 quarts), helping maintain consistent lubrication during extended high-G cornering and long track sessions. An integrated billet windage tray keeps the gears and pinion continuously supplied with oil while reducing internal drag, improving drivetrain efficiency and supporting long-term component life.\n\u003c\/p\u003e\n\n\u003cp\u003e\nTo stabilize differential temperatures, both internal and external cooling fins increase surface area for heat dissipation, providing more consistent thermal control on track or road. For higher-demand builds, the sump also supports external cooling integration through an additional -8AN port, and includes an M22 to -8AN adaptor for straightforward plumbing.\n\u003c\/p\u003e\n\n\u003cp\u003e\nEach sump is CNC-machined from 6061-T6 billet aluminum for strength, precision, and OE-level fitment. It installs as a direct OE-style replacement with no modifications required and is compatible with the MMX Dual Differential Mount (MMR55-1606) with no additional hardware.\n\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-capacity baffled differential sump for improved lubrication stability\u003c\/li\u003e\n  \u003cli\u003eIncreases differential oil capacity by up to 2 litres (2.10 quarts)\u003c\/li\u003e\n  \u003cli\u003eIntegrated billet windage tray for constant lubrication and reduced drag\u003c\/li\u003e\n  \u003cli\u003eInternal and external cooling fins for increased heat dissipation\u003c\/li\u003e\n  \u003cli\u003eCNC-machined 6061-T6 billet aluminum construction\u003c\/li\u003e\n  \u003cli\u003eOE-style drop-in fitment, no modifications required\u003c\/li\u003e\n  \u003cli\u003eIncludes additional -8AN port for external cooling integration\u003c\/li\u003e\n  \u003cli\u003eCompatible with MMX Dual Differential Mount (MMR55-1606)\u003c\/li\u003e\n  \u003cli\u003eHelps reduce the likelihood of “Rear Axle Differential Lock: Driving Stability Limited” warnings during track use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eVehicle Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBMW G87 M2\u003c\/li\u003e\n  \u003cli\u003eBMW G80 \/ G81 M3\u003c\/li\u003e\n  \u003cli\u003eBMW G82 \/ G83 M4\u003c\/li\u003e\n  \u003cli\u003eBMW F97 X3M \/ F98 X4M\u003c\/li\u003e\n  \u003cli\u003eBMW F90 M5\u003c\/li\u003e\n  \u003cli\u003eBMW F9X M8\u003c\/li\u003e\n  \u003cli\u003eCompatible with both RWD and xDrive\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat’s Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBillet CNC-machined high-capacity baffled sump\u003c\/li\u003e\n  \u003cli\u003eBillet CNC-machined windage tray\u003c\/li\u003e\n  \u003cli\u003eMagnetic drain plug and seal\u003c\/li\u003e\n  \u003cli\u003eFill plug and seal\u003c\/li\u003e\n  \u003cli\u003eM22 to -8AN adaptor for external oil cooler integration\u003c\/li\u003e\n  \u003cli\u003eInstallation hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncreased oil capacity for consistent lubrication under high-G load\u003c\/li\u003e\n  \u003cli\u003eImproved drivetrain efficiency and component longevity\u003c\/li\u003e\n  \u003cli\u003eEnhanced temperature control through increased cooling fin surface area\u003c\/li\u003e\n  \u003cli\u003eExternal cooling ready via -8AN port and included adaptor\u003c\/li\u003e\n  \u003cli\u003ePrecision-machined for OEM-style sealing and fitment\u003c\/li\u003e\n  \u003cli\u003eIdeal for high-performance street use and track driving\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eTorque Specs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtension: 45 Nm\u003c\/li\u003e\n  \u003cli\u003eDrain plug: 45 Nm\u003c\/li\u003e\n  \u003cli\u003eFill plug: 45 Nm\u003c\/li\u003e\n  \u003cli\u003e-8AN plug fitting: 40 Nm\u003c\/li\u003e\n  \u003cli\u003eWindage tray: 6–8 Nm (use high-temp threadlocker)\u003c\/li\u003e\n  \u003cli\u003eCover bolts: 12 Nm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProfessional installation recommended\u003c\/li\u003e\n  \u003cli\u003eExternal cooler integration is intended for higher-demand builds and track use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n","brand":"MMX Performance","offers":[{"title":"No","offer_id":52089032605978,"sku":"MMR55-1600","price":1884.0,"currency_code":"USD","in_stock":true},{"title":"Yes Include BMW RTV Sealant (83190404517)","offer_id":52089032638746,"sku":"MMR55-1600-RTV","price":1923.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/mmx-bmw-g8x-high-capacity-baffled-differential-sump-billet-aluminum-white-background.jpg?v=1776360550"},{"product_id":"mmx-performance-bmw-billet-coolant-expansion-cap","title":"MMX Performance BMW Billet Coolant Expansion Cap","description":"\u003cp\u003eThe MMX Performance BMW Billet Coolant Expansion Cap is a precision-engineered upgrade designed to improve both the durability and appearance of your BMW’s cooling system. Unlike decorative covers, this is a true OE replacement cap that fully replaces the factory plastic unit while retaining complete factory functionality.\u003c\/p\u003e\n\u003cp\u003eFactory coolant caps are constructed from plastic and can degrade over time due to repeated heat cycles, leading to potential sealing issues and reduced confidence during servicing. The MMX billet cap addresses this with a robust construction machined from a solid block of 6061 aerospace-grade aluminum, offering superior strength, heat resistance, and long-term reliability.\u003c\/p\u003e\n\u003cp\u003eEach cap is CNC-machined using advanced 5-axis technology, then finished in a deep gloss black anodizing for a clean OEM+ appearance and excellent corrosion resistance. The carefully machined exterior provides improved grip, allowing for confident installation and removal during coolant servicing.\u003c\/p\u003e\n\u003cp\u003ePre-installed with OE-spec internals including a pressure valve, internal spring, and Viton O-ring seal, the MMX coolant expansion cap ensures proper pressure regulation and sealing performance without requiring any transfer of components from the factory cap. This makes installation simple and fully plug-and-play.\u003c\/p\u003e\n\u003cp\u003eAvailable in both 60mm and 90mm fitments, this billet coolant cap replaces BMW OE part numbers 17117639024 (60mm) and 17117639021 (90mm). Please confirm the part number on the underside of your existing cap to ensure correct fitment.\u003c\/p\u003e\n\u003cp\u003eA functional and aesthetic upgrade, the MMX Performance BMW Billet Coolant Expansion Cap delivers long-term reliability while adding a refined finishing touch to any engine bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMMX Performance billet coolant expansion cap for BMW\u003c\/li\u003e\n\u003cli\u003eAvailable in 60mm and 90mm fitments\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eReplaces OE part numbers 17117639024 (60mm) and 17117639021 (90mm)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eDirect OE replacement with full factory-style internals\u003c\/li\u003e\n\u003cli\u003ePre-installed pressure valve, internal spring, and Viton O-ring seal\u003c\/li\u003e\n\u003cli\u003eCNC-machined from 6061 aerospace-grade aluminum\u003c\/li\u003e\n\u003cli\u003eAdvanced 5-axis machining for precise fitment\u003c\/li\u003e\n\u003cli\u003eGloss black anodized finish for corrosion resistance and OEM+ appearance\u003c\/li\u003e\n\u003cli\u003eImproved grip design for easier installation and removal\u003c\/li\u003e\n\u003cli\u003eEliminates concerns associated with aging plastic caps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW models equipped with matching OE coolant cap part numbers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/mmr-performance-bmw-billet-oil-filler-cap-s58-b48e?pr_prod_strat=pinned\u0026amp;pr_rec_id=2118c418e\u0026amp;pr_rec_pid=7811578364100\u0026amp;pr_ref_pid=7811620798660\u0026amp;pr_seq=uniform\" target=\"_blank\"\u003eMMX Performance BMW Billet Oil Filler Cap – S58 \/ B48E\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/mmr-performance-bmw-billet-oil-filler-cap?pr_prod_strat=pinned\u0026amp;pr_rec_id=2118c418e\u0026amp;pr_rec_pid=7365956894916\u0026amp;pr_ref_pid=7811620798660\u0026amp;pr_seq=uniform\" target=\"_blank\"\u003eMMX Performance BMW Billet Oil Filler Cap\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSKU: MMR03-1502 (90mm), MMR03-1503 (60mm)\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in the UK\u003c\/li\u003e\n\u003cli\u003eDirect OE replacement – no modifications required\u003c\/li\u003e\n\u003cli\u003eVerify cap size or OE part number prior to purchase\u003c\/li\u003e\n\u003cli\u003eProlonged exposure to extreme heat may affect anodized finish appearance\u003c\/li\u003e\n\u003cli\u003eThis does not impact performance or functionality\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"90mm Cap (Replaces OE Part 17117639021) | MMR03-1502","offer_id":52089032704282,"sku":"MMR03-1502","price":127.7,"currency_code":"USD","in_stock":true},{"title":"60mm Cap (Replaces OE Part 17117639024) | MMR03-1503","offer_id":52089032737050,"sku":"MMR03-1503","price":127.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/mmx-bmw-billet-coolant-expansion-cap-90mm-black-anodized-white-background.jpg?v=1776360550"},{"product_id":"mmx-performance-mini-f-series-magnetic-gear-shift-paddles","title":"MMX Performance MINI F-Series Magnetic Gear Shift Paddles","description":"\u003cp\u003eTransform the way you drive your MINI with the MMX Billet Magnetic Gear Shift Paddles, engineered exclusively for the MINI F56 platform. Designed as complete replacements, not stick-on covers, these paddles deliver sharper shifts, refined ergonomics, and a premium motorsport-inspired feel that far surpasses the OEM paddles.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic Shift Technology\u003c\/strong\u003e: Provides crisp, precise, and responsive gear transitions with a satisfying click for every shift.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAircraft-Grade Construction\u003c\/strong\u003e: CNC-machined from solid T6-6061 billet aluminium for strength, rigidity, and long-term durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Finishes\u003c\/strong\u003e: Available in \u003cstrong\u003eRed, Black, or Titanium\u003c\/strong\u003e anodized coatings to complement your MINI’s interior.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack-Inspired Design\u003c\/strong\u003e: Extended paddle shape allows effortless gear selection at any steering angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Replacement Kit\u003c\/strong\u003e: Includes new control units and paddle blades for a full upgrade, no flimsy stick-on parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM+ Fitment\u003c\/strong\u003e: Specifically designed to match the curves and lines of the MINI steering wheel, blending seamlessly with the interior.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the UK\u003c\/strong\u003e: Engineered and manufactured with precision for MINI enthusiasts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Upgrade from OEM Paddles?\u003c\/h3\u003e\n\u003cp\u003eThe factory MINI paddles can feel weak, spongy, and underwhelming. MMX’s magnetic system eliminates that vague feedback by delivering instant engagement, improved control, and a more enjoyable driving experience. The result is a paddle set that feels at home on both the street and the track.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits all \u003cstrong\u003eF-Series MINI models\u003c\/strong\u003e equipped with the Cooper S or JCW steering wheel\u003c\/li\u003e\n\u003cli\u003ePrecise fitment for MINI F56\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePair of billet magnetic shift paddles (Red, Black, or Titanium)\n\u003c\/li\u003e\n\u003cli\u003eNew control units for both paddles\u003c\/li\u003e\n\u003cli\u003eInstallation hardware and instructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Black","offer_id":52089033064730,"sku":"MMR04-0007-BLK","price":420.99,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":52089033097498,"sku":"MMR04-0008-TITAN","price":420.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":52089033130266,"sku":"MMR04-0009-RED","price":420.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/54083372613_3b8bfc1689_b_837fe2a5-602e-442f-bfc4-a896ce2ba844.jpg?v=1776360553"},{"product_id":"mmx-high-performance-ignition-coils-b-series","title":"MMX High Performance Ignition Coils - B-Series","description":"\u003cp\u003e\u003cspan\u003eMMX Performance's higher output ignition coils deliver greater energy output, ensuring a stronger and more consistent spark. A simple plug-and-play upgrade over the OE factory coils.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe MMX High performance ignition coils - B-Series are a direct plug-and-play upgrade from your OE ignition coils. Whether your engine is standard or tuned, it will immediately benefit from the greater energy output and stronger, more consistent spark generated by a set of MMX coils.\u003cbr\u003e\u003cbr\u003eThe MMX higher output ignition coils deliver a 10% increase in output energy versus OE. This greater output is perfect for drivers looking to maximize their stock or modified car. \u003cbr\u003e\u003cbr\u003eA coil pack's function is to transform the car battery’s 12-volt output to a much higher voltage. This intensified electrical energy provides a more reliable source for your spark plug to function from, improving engine performance by igniting the fuel and air mixture more efficiently.\u003cbr\u003e\u003cbr\u003eWe've spend a lot of our development time optimizing the coil pack's energy levels to ensure operating temperatures are controlled. Over the lifecycle of our coil pack, this thermal management will help to prevent future break down.\u003cbr\u003e\u003cbr\u003eReplacement is all the more worthwhile on older engines still running the OE coil packs. A new set makes a great preventative maintenance upgrade to avoid the risk of misfires caused as the OE coil packs age and gradually break down.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOur B-Series coil packs apply to the following engines: B36, B38, B46, B48, B58, and S58.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFitment couldn't be easier. These are a simple plug and play replacement. Remove the OE coil packs, replace with our higher output versions. Compatible OEM part reference: 12138643360, 12137619385, 12138678438, and 750990012.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTo aid in removal and longevity, we advise applying a dielectric grease around the rubber boot of the coil.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eFull OE replacement.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e10% increase in output energy versus OE.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo modifications required.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAvailable in red, grey and blue.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStronger and a more consistent spark.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Red (MMR60-0011)","offer_id":52089033163034,"sku":"MMR60-0011","price":46.77,"currency_code":"USD","in_stock":true},{"title":"Grey (MMR60-0012)","offer_id":52089033195802,"sku":"MMR60-0012","price":46.77,"currency_code":"USD","in_stock":true},{"title":"Blue (MMR60-0013)","offer_id":52089033228570,"sku":"MMR60-0013","price":46.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/54021604604_0a396c5e9a_b.jpg?v=1776360551"},{"product_id":"mmx-performance-mini-f-chassis-lowering-spring-set","title":"MMX Performance  MINI F-Chassis Lowering Spring Set","description":"\u003cp\u003eThe MMR Performance MINI F56 lowering spring kit is one of our best-sellers. Little wonder, as they've earned a reputation for delivering the perfect blend of improved handling, enhanced looks, yet all without sacrificing ride quality.\u003c\/p\u003e\n\u003cp\u003eOur springs provide a drop at the front of approx 20mm whilst the rear sits lower by 25mm.\u003c\/p\u003e\n\u003cp\u003eThe drop in ride-height makes a huge difference to the handling characteristics; further enhancing the F56 MINI, making it feel lighter, more nimble and with significantly sharper turn-in. Just how it should have come from the factory, in fact.\u003c\/p\u003e\n","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089033326874,"sku":"MMR08-1401","price":332.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/MMR08-14015.png?v=1776360552"},{"product_id":"mmx-performance-5x132-wheel-spacer-kit-bmw-g90-g99-m5","title":"MMX Performance 5x132 Wheel Spacer Kit | BMW G90\/G99 M5","description":"\u003cp\u003eUpgrade the stance, handling, and overall presence of your BMW G90 \/ G99 M5 with the MMX Performance 5x132 Wheel Spacer Kit. Designed specifically for the latest M5 platform, these hubcentric spacers improve wheel fitment while enhancing driving dynamics. As one of the most effective OEM+ upgrades, MMX spacers deliver both functional performance gains and a more aggressive, flush appearance.\u003c\/p\u003e\n\u003cp\u003eAvailable in 10mm, 12mm, and 15mm widths, this system allows you to fine-tune wheel offset for the ideal balance of aesthetics and performance. By widening the track width, these spacers improve stability and cornering response while also providing additional clearance for larger brake systems and suspension upgrades.\u003c\/p\u003e\n\u003cp\u003eEngineered with precision, each spacer features a hubcentric lip to ensure proper alignment with the factory hub, eliminating vibration and maintaining OEM-level driving refinement. Manufactured from lightweight aluminum, the spacers offer excellent strength while minimizing added unsprung weight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for BMW G90 \/ G99 M5 platform\u003c\/li\u003e\n\u003cli\u003eAvailable sizes: 10mm, 12mm, 15mm\u003c\/li\u003e\n\u003cli\u003e5x132 bolt pattern with hubcentric design\u003c\/li\u003e\n\u003cli\u003eLightweight aluminum construction\u003c\/li\u003e\n\u003cli\u003eImproves track width, stability, and handling response\u003c\/li\u003e\n\u003cli\u003eProvides additional clearance for brake calipers and suspension components\u003c\/li\u003e\n\u003cli\u003eIncludes extended-length grade 10.9 carbon steel black wheel bolts (10 per pair)\u003c\/li\u003e\n\u003cli\u003eSold in pairs for front and rear fitment flexibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/collections\/m5-g90\"\u003eBMW M5 (G90 \/ G99)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSKU: MMR37-1619 (10mm)\u003c\/li\u003e\n\u003cli\u003eSKU: MMR37-1620 (12mm)\u003c\/li\u003e\n\u003cli\u003eSKU: MMR37-1621 (15mm)\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eThis item is non-returnable\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"10mm","offer_id":52089033359642,"sku":"MMR37-1619","price":130.97,"currency_code":"USD","in_stock":true},{"title":"12mm","offer_id":52089033392410,"sku":"MMR37-1620","price":134.09,"currency_code":"USD","in_stock":true},{"title":"15mm","offer_id":52089033425178,"sku":"MMR37-1621","price":138.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/54749214548_1b596c0717_b_a5b93dc3-b0c6-4473-82e2-06bed91a582f.jpg?v=1776360552"},{"product_id":"mmx-performance-bmw-e9x-m3-gear-shift-paddle-set","title":"MMX Performance BMW E9X M3 Gear Shift Paddle Set","description":"\u003cp\u003eTransform your driving experience with the MMR Performance BMW E9X M3 Gear Shift Paddle Set. Designed to offer enhanced control and a superior tactile feel, these gear shift paddles are the perfect upgrade for BMW E9X M3 enthusiasts seeking both performance and aesthetics.\u003c\/p\u003e\n\u003cp\u003eManufactured from Aircraft Grade T-6061 Aluminum Billet our Gear Shift Paddle Set puts you back in control of your car, to make grabbing the next gear more intuitive and certainly more pleasurable. This added feel and ease of use make our Gear Shift Paddle Set the natural choice over the slightly disappointing OEM Paddles.\u003cbr\u003e\u003cbr\u003eWe have developed these paddles with the track in mind, making it easy for you to select gears no matter the steering angle. Because, unlike some stick-on alternatives, we have engineered these to be complete replacement blades, and along with maintaining the OEM Control Unit. Doesn't your car deserve it?\u003cbr\u003e\u003cbr\u003eEach paddle starts life as a solid billet of aluminum, giving total rigidity for each gearchange and avoiding the horrible bendy\/wobbly feel that less rigid paddles offer.\u003cbr\u003e\u003cbr\u003eOur elegant paddle set has been specifically designed with the BMW M Performance Steering Wheel in mind and therefore follows the curves and lines of the wheel itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCrafted from Premium Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eLarger Paddle Surface area Provides Improved Grip and Accessibility\u003c\/li\u003e\n\u003cli\u003eEnjoy Smoother and More Accurate Gear Shifts\u003c\/li\u003e\n\u003cli\u003eDesigned for Straightforward Installation with no Modifications Required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Titanium","offer_id":52089033883930,"sku":"MMR04-0201-TI","price":283.78,"currency_code":"USD","in_stock":true},{"title":"Dark Anthracite","offer_id":52089033916698,"sku":"MMR04-0201-DA","price":283.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/53925844702_01423b4c34_b.jpg?v=1776360556"},{"product_id":"mmx-performance-billet-air-conditioning-caps","title":"MMX Performance Billet Air Conditioning Caps","description":"\u003cp\u003eThe MMX Billet Air Conditioning Caps are designed to replace the factory-fitted plastic AC caps found on BMW and MINI models, offering a durable, refined alternative to a commonly overlooked weak point in the engine bay.\u003c\/p\u003e\n\u003cp\u003eOver time, OEM plastic AC caps can become brittle due to heat cycles, age, and repeated removal. This can lead to cracking, poor sealing, and an untidy appearance. MMX billet caps eliminate these issues with a long-lasting aluminum solution that improves both function and aesthetics.\u003c\/p\u003e\n\u003cp\u003eEach cap is CNC-machined from high-quality 6061-T6 aluminum, finished in anodized black, and hand-polished to match the MMX billet aluminum engine bay range. A subtle engraved MMX “X” logo provides a clean OEM+ detail.\u003c\/p\u003e\n\u003cp\u003eMMX offers direct replacements for both OEM AC cap types, ensuring compatibility across BMW and MINI platforms, including older R134A systems using black OEM caps and newer R1234YF systems using grey OEM caps (circa 2017+).\u003c\/p\u003e\n\u003cp\u003eDesigned as true OEM replacements, the caps are pre-sealed and install in seconds with no modification required. They are fully reversible and can be removed or returned to stock just as easily. No AC system re-gas is required at any stage, simply remove the factory caps and install the MMX billet versions.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCNC-machined from 6061-T6 aluminum\u003c\/li\u003e\n\u003cli\u003eAnodized black finish with engraved MMX “X” logo\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement design\u003c\/li\u003e\n\u003cli\u003ePre-sealed for easy installation\u003c\/li\u003e\n\u003cli\u003eFully reversible, returns to stock in seconds\u003c\/li\u003e\n\u003cli\u003eDesigned to match the MMX billet aluminum engine bay range\u003c\/li\u003e\n\u003cli\u003eNo AC system re-gas required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eR134A Systems (Black OEM Caps)\u003c\/strong\u003e\u003cbr\u003eOEM part numbers: 64 53 8 397 437 and 64 53 8 387 438\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eR1234YF Systems (Grey OEM Caps)\u003c\/strong\u003e\u003cbr\u003eOEM part numbers: 07 14 9 287 978 and 07 14 9 287 979\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eFitment Disclaimer\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eWhile every effort has been made to ensure accurate vehicle information, customers are responsible for verifying compatibility with their specific vehicle and engine variant prior to purchase.\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Grey OEM R1234YF Cap | MMR03-0003","offer_id":52089034637594,"sku":"MMR03-0003","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Black OEM R134A Cap | MMR03-0004","offer_id":52089034670362,"sku":"MMR03-0004","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/54988491084_c2ac95f6cc_b.jpg?v=1776360559"},{"product_id":"mmx-performance-bmw-s63-oil-plug-replacement-crush-washer-set","title":"MMX Performance BMW S63 Oil Plug Replacement Crush Washer Set","description":"\u003cp\u003eSet of 5 replacement crush washers in M18 fitment for oil sump drain plug.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e Oil sump plug not included.\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089034998042,"sku":"MMR03-0512","price":12.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/53318934118_efb4fc7815_b.jpg?v=1776360561"},{"product_id":"mmx-performance-bmw-oil-filter-o-ring-service-kit-b58-b57","title":"MMX Performance BMW Oil Filter O-Ring Service Kit - B58 \/ B57","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-sheets-root=\"1\"\u003eThe MMR Performance Oil Filter O-Ring service kit is a direct oil filter o-ring replacement designed specifically for servicing the MMR Performance oil filter and billet housing. This kit includes four precision oil filter o-rings required to maintain a proper seal and consistent oil pressure during regular maintenance.\u003cbr\u003e\u003cbr\u003eThese oil filter housing O-rings are essential for preserving the sealing integrity of the filter system over time. As O-rings naturally degrade with heat cycles and oil exposure, replacing the O-ring for the oil filter housing during filter cleaning or servicing helps prevent leaks and ensures optimal performance.\u003cbr\u003e\u003cbr\u003eThis oil filter cap O-ring kit is a direct replacement for the original seals supplied with the MMR Performance oil filter, making installation quick and straightforward. No special tools are required - simply remove the worn seals and install the new O-ring oil filter components in their original locations.\u003cbr\u003e\u003cbr\u003eImportant:\u003cbr\u003e\u003cbr\u003eIncludes four oil filter O-rings only\u003cbr\u003e\u003cbr\u003eDoes not include the MMR oil filter or billet housing\u003cbr\u003e\u003cbr\u003eFitment is limited to the MMR Performance oil filter (MMR17-1502), designed to prevent the well-known B58 oil filter collapse issue\u003cbr\u003e\u003cbr\u003eFor best results, we recommend replacing your oil filter O-rings regularly whenever the filter is cleaned or serviced.\u003cbr\u003e\u003cbr\u003eEngineered to OEM-level tolerances and trusted for performance reliability by MMR Performance.\u003c\/span\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089035096346,"sku":"MMR17-0000","price":13.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/MMR-O-Ring-1.jpg?v=1776360563"},{"product_id":"mmx-performance-g8x-m2-m3-m4-rp650-performance-brake-pad-set-rear","title":"MMX Performance G8X M2 \/ M3 \/ M4 RP650 Performance Brake Pad Set - Rear","description":"\u003cp\u003eIf you drive your G-Series M-Car hard, the chances are you’ve experienced brake fade at some point. That’s where our high-performance RP650 brake pads come in. A simple replacement for your factory pads using the standard braking hardware, they deliver a much higher resistance to high-temperature fade. This makes them perfect for fast road driving and even occasional track day use, yet without any compromise in daily driving.\u003c\/p\u003e\n\u003cp\u003eOur compound testing focused on developing a pad that finds that sweet spot between excellent cold bite and high-temperature fade resistance. The result is a medium aramid fiber compound with a friction coefficient of 0.42mu in the temperature range of 450 – 650°C.\u003c\/p\u003e\n\u003cp\u003eThis compound is the secret to how our high-performance RP650 brake pads provide superior stopping power and reliable performance under even the most demanding conditions without requiring a warmup period - essential for cars that have to perform perfectly in daily driving duties yet stand up to the demands of fast road and occasional track use.\u003c\/p\u003e\n\u003cp\u003eFinally, it’s a legal requirement in most countries for brake pads to carry ECE-R90 certification – yet many other aftermarket pads do not. Not only is this ECE-R90 standard essential for legality (and potentially your insurance validity), this regulation gives you the peace of mind that the pads are tested and approved for cold performance, speed, sensitivity, friction behavior, compressibility, shear and hardness. So, the pads will work just as well when cold as when up to full track temperatures.\u003c\/p\u003e\n\u003cp\u003eWhen it comes to high-performance driving, we all know that braking performance is just as important as acceleration and cornering. So, to gain performance from your factory BMW G8x M2, M3, or M4's brakes, our RP650 rear brake pads are an essential upgrade.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePerfect for fast road use\u003c\/li\u003e\n\u003cli\u003eComplete plug-and-play OE replacement\u003c\/li\u003e\n\u003cli\u003eMatching front MMX pads are available separately\u003c\/li\u003e\n\u003cli\u003eMatching 2-piece MMX discs are available separately\u003c\/li\u003e\n\u003cli\u003eECE-R90 Approved\u003c\/li\u003e\n\u003cli\u003eExcellent cold bite and high-temperature fade resistance\u003c\/li\u003e\n\u003cli\u003eSuitable for short-use track days\u003c\/li\u003e\n\u003cli\u003eBedding in happens naturally over the first 100-200 miles in urban driving\u003c\/li\u003e\n\u003cli\u003eQuiet and smooth braking with shimmed, slotted, chamfered construction\u003c\/li\u003e\n\u003cli\u003eResponsive pedal feel for progressive braking\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089035325722,"sku":"MMR27-1602-R","price":329.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/54295742622_64a3339201_b.jpg?v=1776360564"},{"product_id":"mmx-performance-bmw-f2x-f3x-b58-silicone-intake-hose","title":"MMX Performance BMW F2X \/ F3X B58 Silicone Intake Hose","description":"\u003cp\u003eThe MMR Performance silicone intake hose for B58-powered F-series BMWs has been designed to smooth the airflow from intake into the turbo, enhancing induction noise and even improving engine bay aesthetics.\u003c\/p\u003e\n","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089035424026,"sku":"MMR16-0501","price":114.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/MMR16-05016.png?v=1776360566"},{"product_id":"mmx-performance-g8x-m2-m3-m4-ultimate-differential-track-pack","title":"MMX Performance G8X M2 \/ M3 \/ M4 Ultimate Differential Track Pack","description":"\u003cp\u003eFor the driver who demands unshakable reliability and performance when the laps pile up, the Track Day Power \u0026amp; Stability Kit brings together three critical upgrades from MMX Performance for the G8X-generation ‎M2, M3 and M4. This thoughtfully-curated bundle ensures your drivetrain keeps up with you—hard braking, high G corners and extended stints included.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eWhat's Included?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1. High-Capacity Billet Oil Pan (Differential Sump) for G8X M2\/M3\/M4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis CNC-machined 6061-T6 billet aluminum sump increases oil capacity by up to 2 litres and features a windage tray plus both internal and external cooling fins. Helps keep the differential fed and cool under continuous track pressure.\u003c\/p\u003e\n\u003cp\u003eProduct Details:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect OE-style fit, no modifications required\u003c\/li\u003e\n\u003cli\u003eProvides -8AN port for external cooler integration\u003c\/li\u003e\n\u003cli\u003eHelps prevent “Driving Stability Limited” warnings during high-load driving\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e2. Magnetic Differential Oil Drain Plug - M22x1.5\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis diff plug has a large surface area of the magnetic end help to catch such particles, therefore cleansing your oil allowing it to more effectively lubricate, whilst minimizing further potential wear before it happens.\u003c\/p\u003e\n\u003cp\u003eProduct Details:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eT6061 lightweight aluminum\u003c\/li\u003e\n\u003cli\u003eAnodized in our trademark finish\u003c\/li\u003e\n\u003cli\u003eLarge surface area magnetic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e3. Dual Differential Mount for G8X M2\/M3\/M4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo complement the upgraded sump, this mount further solidifies your diff housing. Minimising unwanted movement helps maintain alignment of drivetrain components when you’re loading hard into corners and powering out.\u003c\/p\u003e\n\u003cp\u003eProduct Details:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered for track use with increased rigidity and durability\u003c\/li\u003e\n\u003cli\u003eAllows your differential to remain stable under lateral and longitudinal forces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e4. Rear Differential Output Shaft Heat Shield Set for G8X M2\/M3\/M4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen drivetrain components heat up during extended performance sessions, you risk thermal degradation. This heat-shield set protects the output shaft area, reducing heat soak and maintaining reliability.\u003c\/p\u003e\n\u003cp\u003eProduct Details:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCustom-fitted for the output shaft path and surrounding zones\u003c\/li\u003e\n\u003cli\u003eDesigned to withstand high-temperature race environments and maintain consistent component life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eIdeal For the Track\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEach component was selected to tackle the common weak links that show up on the track: oil starvation under high G, diff housing movement under load, heat soak in drivetrain components\u003c\/li\u003e\n\u003cli\u003eCombining sump, mount and heat-shield means you’re not just upgrading one part—you're bolstering the system from multiple angles\u003c\/li\u003e\n\u003cli\u003eFits perfectly with the G8X M2, M3, and M4 platforms (both RWD and xDrive variants where applicable)\u003c\/li\u003e\n\u003cli\u003eGreat value when bundled with installation guidance and recommended maintenance (fluid change, torque spec check) to maximise the performance and longevity of the upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eVehicle Applications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eG87 M2, G80\/G81 M3, G82\/G83 M4\u003c\/li\u003e\n\u003cli\u003eSupports RWD and xDrive variants (check specific mounting\/drive-layout options)\u003c\/li\u003e\n\u003cli\u003eInstallation recommended with performance-rated fluids and proper torque specs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGet your G8X platform ready for serious track performance. This Ultimate Track Pack is available exclusively through IND Distribution. Elevate your build, lap with confidence, and leave the limits behind.\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"No","offer_id":52089035817242,"sku":"MMR55-1600KT","price":2747.0,"currency_code":"USD","in_stock":true},{"title":"Yes Include BMW RTV Sealant (83190404517)","offer_id":52089035850010,"sku":"MMR55-1600KT-RTV","price":2786.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/54932704629_bb5178f002_b_05a01510-58c5-490c-a8f6-56a894efe410.jpg?v=1776360572"},{"product_id":"mmx-g8x-m2-m3-m4-adjustable-front-sway-bar-link-set","title":"MMX G8X M2 \/ M3 \/ M4 Adjustable Front Sway Bar Link Set","description":"\u003cp class=\"font_0 wixui-rich-text__text\"\u003e\u003cspan\u003eWhen your ride height is altered, your vehicle's anti-roll (anti-sway) bar ends are pulled up out of their optimum location. With around 40mm of adjustable length, plus left and right threaded ends for easy length adjustment, the MMX adjustable drop links allow you to adjust back to zero preload on your anti-roll bar - operating exactly as it should again.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"font_0 wixui-rich-text__text\"\u003e\u003cspan\u003eThe MMX Performance adjustable drop links are a great choice for any lowered or hard-driven BMW to zero the pre-load on your anti-roll bar geometry. Plus, by replacing the stock rubber joints with motorsport-spec ball joint ends, you'll add valuable stiffness and precision to handing and steering dynamics.\u003cbr\u003e\u003cbr\u003eThe drop link attaches the front anti roll bar ends to the front damper. The OEM links were made the length they are for a reason, to compliment the standard ride height.\u003cbr\u003e\u003cbr\u003eWhen your ride height is altered, your vehicle's anti-roll bar ends are pulled up. With around 40mm of adjustable length, plus left and right threaded ends for easy length adjustment, the MMX adjustable drop links allow you to adjust back to zero preload on your anti-roll bar - allowing it to operate exactly as it should once again.\u003cbr\u003e\u003cbr\u003eMotorsport-spec ball joint ends using high strength Teflon-lined steel mean much more direct response when turning in to corners. By replacing the soft rubber bushing in the factory links with these motorsport-spec ball joints, cornering and steering responses are immediately sharpened. Importantly, rubber dust boots are fitted to protect the joints from road dirt and salt accumulation.\u003cbr\u003e\u003cbr\u003eThe lightweight CNC-machined T6-6061 aluminum bodies are anodized in our beautiful MMX gloss black coating to look good, and stay looking good.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eManufactured in the UK from Aircraft grade T6-6061 aluminum billet.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eComplete OE replacements.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAnodized in signature MMX Gloss black.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHeavy-duty ball joints to ensure a long life span.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e325-365mm adjustment range.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089036210458,"sku":"MMR24-1505","price":283.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/54121559186_57ccc0a814_b.jpg?v=1776360578"},{"product_id":"mmx-performance-bmw-f-series-billet-washer-fluid-cap","title":"MMX Performance BMW F-Series Billet Washer Fluid Cap","description":"\u003cp\u003e\u003cspan\u003eIt’s all about that detail. Replace that cheap plastic washer cap with the stunning MMX billet washer fluid cap finished in anodized gloss black. The perfect addition to an already comprehensive range of under-bonnet dress up parts. Available with either MMR or MMX engraved logo.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits All F-Series\u003c\/li\u003e\n\u003cli\u003eDoes NOT fit G-Chassis based F-Series Cars (Ie: F90 M5, F9X M8)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089036275994,"sku":"MMR03-0000","price":77.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/54025812948_607d71624c_b.jpg?v=1776360578"},{"product_id":"mmx-performance-g20-m340i-330i-lowering-spring-set","title":"MMX Performance G20 M340i \/ 330i Lowering Spring Set","description":"\u003cp\u003eThe MMR Performance Lowering Spring Kit is one of our best-sellers. Little wonder, as they've earned a reputation for delivering the perfect blend of improved handling, enhanced looks, yet all without sacrificing ride quality.\u003c\/p\u003e\n\u003cp\u003eThe drop in ride-height makes a huge difference to the handling characteristics: by lowering the M340i \u0026amp; 330i G20's center of gravity, it reduces body roll for better dynamics, whilst maintaining the ride quality and comfort of your car.\u003c\/p\u003e\n\u003cp\u003eThanks to the carefully selected progressive spring rates the ride-quality remains unaffected and is actually nicer to drive at slower speeds. But push-on through the corners and the G20 chassis really comes to life, making it feel lighter, more direct and with significantly sharper turn-in.\u003c\/p\u003e\n\u003cp\u003eMeanwhile, the car's appearance is transformed. Our development has resulted in the springs providing a drop at both front and rear of around 30mm. By getting rid of those nasty wheel arch gaps, it'll look just how it should have come from the factory!\u003c\/p\u003e\n\u003cp\u003eGo lower or stiffer than these MMR Springs and your car will bounce and crash as the dampers are mismatched to spring-rate, and the springs themselves run out of travel.\u003c\/p\u003e\n\u003cp\u003eFinished in MMR Metallic Grey, the Lowering Springs are developed to be fully compatible with cars fitted with either static or Adaptive M adaptive dampers, and available for xDrive and RWD versions. A must-fit for any M340i, 330i G20!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2018+ G20 M340i and 330i models only\u003c\/li\u003e\n\u003cli\u003eCarefully optimized spring rates for improved driving dynamics\u003c\/li\u003e\n\u003cli\u003eDesigned to be compatible with Adaptive M and static factory dampers\u003c\/li\u003e\n\u003cli\u003eApplicable to saloon\/sedan only\u003c\/li\u003e\n\u003cli\u003eLowers vehicle by 30mm front | 30mm rear\u003c\/li\u003e\n\u003cli\u003ePowder coated in MMR Metallic Gunmetal Grey for a durable finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"xDrive","offer_id":52089036374298,"sku":"MMR08-1101","price":332.01,"currency_code":"USD","in_stock":true},{"title":"RWD","offer_id":52089036407066,"sku":"MMR08-1102","price":332.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/53232413114_eb11075f66_b.jpg?v=1776360578"},{"product_id":"mmx-performance-bmw-f1x-f90-s63-twin-charge-cooler-set","title":"MMX Performance BMW F1X \/ F90 S63 Twin Charge-Cooler Set","description":"\u003cp\u003eThe MMX Performance chargecoolers for S63-powered BMW M5 \u0026amp; M6 F1x plus M5 F90 improves power and torque output significantly by substantially reducing charge air temperatures. Using a large tube and fin stepped core, these coolers provide literally double the cooling area and are 28% larger in size per cooler vs OE.\u003c\/p\u003e\n\u003cp\u003eThe factory charge coolers used on the S63 engine have proved to be unable to cope with the demands of higher power, hard driven cars, showing up as serious power losses during hard driving as air intake temperatures soar.\u003c\/p\u003e\n\u003cp\u003eOur massive replacement chargecoolers are the best performing cooler upgrade on the market for the BMW S63. The intercooler core was developed specifically for the high requirements of the F1x \u0026amp; F9x M-Cars. Using a large tube and fin stepped core, our performance chargecoolers provide double the cooling area and are 28% larger per cooler than OE.\u003c\/p\u003e\n\u003cp\u003eOur development focused on finding the ‘sweet spot’ of maximum IAT cooling versus minimum pressure loss. This has allowed us to achieve increased size without increased lag. By consistently reducing intake air temperatures (IAT), heat soak is minimized delivering increased performance again and again. No need for the recovery cool-down times needed for the production cooler.\u003c\/p\u003e\n\u003cp\u003eThis race-proven cooler really is essential for every stage of tuning on any high performance S63-engined M-Car.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA 28% increase in core size per chargecooler vs the OE chargecoolers\u003c\/li\u003e\n\u003cli\u003eDelivers substantial temperature drop across the core, with minimal impact on pressure drop\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in the UK\u003c\/li\u003e\n\u003cli\u003eAnti-corrosive thermal coating\u003c\/li\u003e\n\u003cli\u003eEasy installation, no cutting or permanent modification to the vehicle required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089036472602,"sku":"MMR05-1002","price":3150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/Artboard1-1_d1c2cae7-4c3a-4489-bba9-4c8c0329fa47.png?v=1776360578"},{"product_id":"mmx-performance-magnetic-oil-sump-drain-plug-s63","title":"MMX Performance Magnetic Oil Sump Drain Plug - S63","description":"\u003cp\u003eThe MMX Performance BMW magnetic sump plug is a simple yet effective upgrade that can dramatically increase your engine's lifespan. As an engine wears, tiny metallic particles become suspended in the oil, accelerating wear each time you drive. Our magnetic sump plugs will help to separate these ferrous particles out.\u003c\/p\u003e\n\u003cp\u003eThere's no avoiding it, your engine's contact surfaces wear a tiny amount each time it runs. So, it becomes inevitable that tiny ferrous particles become suspended in the oil. They quickly make their way around your engine via the oil system for thousands of miles traveling over sensitive components such as your crankshaft bearings or camshaft caps, slowly contributing to increased engine wear.\u003c\/p\u003e\n\u003cp\u003eOur magnetic sump plug has a large surface area magnetic end, which helps to catch metal particles. And of course, the harder your engine works, the greater the risk of this nasty metallic debris, meaning the greater the benefit of using our magnetic sump plug.\u003c\/p\u003e\n\u003cp\u003eThe MMX Performance magnetic sump plug is crafted from T6-6061 lightweight aluminum and is anodized in our trademark gloss black finish. It's supplied with a set of 5 sealing washers included (additional packs of washers can be ordered).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eFits S63 Engine; for F95 X5M \/ F96 X6M application fits Pre-LCI models only\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eFull OE plug replacement\u003c\/li\u003e\n\u003cli\u003eM18 x 1.5 fitment\u003c\/li\u003e\n\u003cli\u003eProtect and increase engine lifespan\u003c\/li\u003e\n\u003cli\u003eCrafted from T6-6061 lightweight aluminum\u003c\/li\u003e\n\u003cli\u003eAnodized in our trademark gloss black finish\u003c\/li\u003e\n\u003cli\u003eSupplied with a set of 5 sealing washers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089036505370,"sku":"MMR03-0506","price":37.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/54005329795_7e02a21c94_b.jpg?v=1776360578"},{"product_id":"mmx-performance-g-chassis-gear-shift-paddle-set","title":"MMX Performance G-Chassis Gear Shift Paddle Set","description":"\u003cp\u003e\u003cstrong\u003eNOT FOR MODELS WITH BOOST FUNCTION: G90 M5, G70 7-Series, G45 X3 M50\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSharpen up your gearchanges with our exquisitely engineered Aluminum Billet Gear Shift Paddle Set for all BMW G Series cars, F90, F40\/44 models, plus Supra 5 J29 with the latest Gen 3 M Performance Steering Wheel. Unlike some cheaper options, these are fully engineered replacements, not just stick-on covers. Doesn't your car deserve that?\u003c\/p\u003e\n\u003cp\u003eManufactured from Aircraft Grade T-6061 Aluminum Billet our Gear Shift Paddle Set puts you back in control of your M Performance Vehicle, to make grabbing the next gear more intuitive and certainly more pleasurable. This added feel and ease of use make our Gear Shift Paddle Set the natural choice over the slightly disappointing OEM Paddles.\u003c\/p\u003e\n\u003cp\u003eWe have developed these paddles with the track in mind, making it easy for you to select gears no matter the steering angle. Because, unlike some stick-on alternatives, we have engineered these to be complete replacement blades, and along with maintaining the OEM Control Unit.\u003c\/p\u003e\n\u003cp\u003eEach paddle starts life as a solid billet of aluminum, giving total rigidity for each gearchange and avoiding the horrible bendy\/wobbly feel that less rigid paddles offer.\u003c\/p\u003e\n\u003cp\u003eOur elegant paddle set has been specifically designed with the BMW M Performance Steering Wheel in mind and therefore follows the curves and lines of the wheel itself.\u003c\/p\u003e\n\u003cp\u003eAvailable in two finishes to complement the interior of your BMW, you have the choice of Titanium Silver or Dark Anthracite Grey.\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Titanium","offer_id":52089036833050,"sku":"MMR04-0503-TI","price":283.78,"currency_code":"USD","in_stock":true},{"title":"Dark Anthracite","offer_id":52089036865818,"sku":"MMR04-0503-DA","price":283.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/53581630949_4beccf1b50_b.jpg?v=1776360578"},{"product_id":"mmx-performance-bmw-s55-n55-one-piece-high-hp-crank-hub-upgrade-kit-4-pin","title":"MMX Performance BMW S55 \/ N55 One-Piece High HP Crank Hub Upgrade Kit - 4-Pin","description":"\u003cp\u003e\u003cstrong\u003e*Recommended for high-powered cars over 700HP*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEngine failures caused by the standard three-piece crank hub on the S55 and N55 engine are (unfortunately) well known, but these are fully addressed with the installation of the MMR Performance 4-pinned single-piece crank hub. Together with the option of adding our Capture Plate for ultimate security.\u003c\/p\u003e\n\u003cp\u003eThe centrepiece of the MMR kit is the UK made CNC-machined one-piece crank hub, created from billet EN36 steel that's heat-treated with a 0.75mm case hardening, making it incredibly strong and durable. Included are four aerospace precision machined dowels that mechanically lock the hub to end of the crank itself, plus a brand new OE bolt.\u003c\/p\u003e\n\u003cp\u003eInstallation of these dowels is certainly not a DIY job. But, to make the job easier for the professionals, ensuring that the required crank modifications are made safely and accurately, the MMR kit also includes a full installation jig that includes a bolt-on drilling guide, a location bolt for this guide, plus an HSS rolled high-speed drill bit.\u003c\/p\u003e\n\u003cp\u003eTogether, the single-piece design combined with the four-pin location ensures that there is simply no way that the friction plates can ever slip. With the new OE crank bolt tightened appropriately, this delivers a transformational improvement in reliability and peace of mind versus the OE version.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.mmrperformance.co.uk\/post\/what-you-need-to-know-about-the-bmw-s55-n55-crank-hub-failure\" target=\"_blank\"\u003eREAD ABOUT CRANK HUB FAILURES HERE\u003c\/a\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Without Capture Plate","offer_id":52089036964122,"sku":"MMR20-1004","price":1064.18,"currency_code":"USD","in_stock":true},{"title":"With Capture Plate (MMR20-1002)","offer_id":52089036996890,"sku":"MMR20-1004FK","price":1227.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/MMR-PCHK-5.jpg?v=1776360578"},{"product_id":"mmx-performance-magnetic-oil-sump-drain-plug-m12x1-5","title":"MMX Performance Magnetic Oil Sump Drain Plug - M12x1.5","description":"\u003cp\u003eThe MMX Performance Magnetic Oil Sump Drain Plug – M12x1.5 is a precision-engineered upgrade designed to protect your engine from harmful metallic debris while improving long-term reliability. As engines operate, microscopic ferrous particles are naturally generated through normal wear. These particles remain suspended in the oil and continuously circulate through the lubrication system, passing over critical components such as crankshaft bearings, camshafts, and journals.\u003c\/p\u003e\n\u003cp\u003eThe MMX magnetic sump plug addresses this issue with a high-strength integrated magnet featuring a large surface area designed to actively capture and retain ferrous particles before they can continue circulating. By removing these contaminants from the oil system, the plug helps maintain cleaner oil, improve lubrication efficiency, and reduce internal wear, making it especially beneficial for high-performance, modified, or high-mileage engines.\u003c\/p\u003e\n\u003cp\u003eEach plug is CNC-machined from T6-6061 lightweight aluminum, offering an optimal balance of strength and weight reduction. It is finished in a durable gloss black anodized coating for corrosion resistance and a clean OEM+ appearance. The plug is supplied with five replacement sealing washers, ensuring a proper seal across multiple service intervals.\u003c\/p\u003e\n\u003cp\u003eA simple yet highly effective upgrade, the MMX Performance Magnetic Oil Sump Drain Plug – M12x1.5 is an essential addition for enthusiasts looking to maximize engine protection at every oil change.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMMX Performance magnetic oil sump drain plug – M12x1.5 thread\u003c\/li\u003e\n\u003cli\u003eIntegrated high-strength magnet captures harmful ferrous particles\u003c\/li\u003e\n\u003cli\u003eLarge magnetic surface area for improved debris collection\u003c\/li\u003e\n\u003cli\u003eCNC-machined from T6-6061 lightweight aluminum\u003c\/li\u003e\n\u003cli\u003eGloss black anodized finish for corrosion resistance and OEM+ appearance\u003c\/li\u003e\n\u003cli\u003eHelps reduce engine wear and maintain cleaner oil\u003c\/li\u003e\n\u003cli\u003eIdeal for performance, modified, and high-mileage engines\u003c\/li\u003e\n\u003cli\u003eDirect replacement for factory oil drain plug\u003c\/li\u003e\n\u003cli\u003eIncludes five replacement sealing washers\u003c\/li\u003e\n\u003cli\u003eSimple installation during routine oil service\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eReplaces OE Part Numbers: 11137535106, 07119963151\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll BMW engines with M12x1.5 oil sump thread\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/mmr-performance-magnetic-differential-oil-plug-m22x1-5?variant=41959017545924\" target=\"_blank\"\u003eMMX Performance Magnetic Differential Oil Drain Plug – M22x1.5\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSKU: MMR03-0504\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in the UK \u003c\/li\u003e\n\u003cli\u003eAdditional sealing washer packs available separately\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089037029658,"sku":"MMR03-0504","price":37.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/mmx-bmw-magnetic-oil-drain-plug-m12x1-5-black-anodized-white-background.jpg?v=1776360578"},{"product_id":"mmx-performance-bmw-b58-b57-billet-oil-filter-housing-cap","title":"MMX Performance BMW B58 \/ B57 Billet Oil Filter Housing Cap","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-sheets-root=\"1\"\u003eThe MMX Performance BMW B58 \/ B57 Billet Oil Filter Housing Cap is a precision-engineered replacement designed to eliminate the common failures associated with the factory plastic oil filter housing. BMW’s OEM plastic cap is known to crack or deform during routine servicing, often leading to oil seepage and unreliable sealing. This billet upgrade provides a permanent solution with improved durability, sealing integrity, and long-term confidence.\u003cbr\u003e\u003cbr\u003eEach MMX billet oil filter housing cap is CNC-machined from a solid block of 6061 aerospace-grade aluminum, ensuring exceptional strength while remaining lightweight. The cap is finished in a durable Midnight Black anodized coating, delivering a refined OEM+ appearance that holds up to repeated heat cycles and regular maintenance.\u003cbr\u003e\u003cbr\u003eBeyond aesthetics, this billet oil filter housing cap is engineered for functional superiority. An integrated pressure control oil bypass is built directly into the housing, removing the need to transfer the fragile OEM plastic bypass valve—an operation that frequently results in damaged components on other aftermarket solutions. This integrated design ensures consistent oil flow and pressure regulation without relying on failure-prone factory parts.\u003cbr\u003e\u003cbr\u003eInstallation of the MMX Performance BMW B58 \/ B57 Billet Oil Filter Housing Cap is straightforward and best completed during a standard oil and filter service. The cap installs directly in place of the factory unit and includes a factory-spec O-ring for proper sealing and leak-free operation. It is fully compatible with the factory oil filter and pairs ideally with the MMX Performance stainless steel oil filter to address the well-documented B58 paper filter collapse issue.\u003cbr\u003e\u003cbr\u003eDesigned for both daily-driven vehicles and performance-focused builds, this BMW oil filter housing cap is an essential upgrade for owners seeking improved reliability, cleaner engine bays, and long-term peace of mind.\u003cbr\u003e\u003cbr\u003eKey Features \u0026amp; Benefits:\u003cbr\u003e\u003cbr\u003eCNC-machined 6061 billet aluminum construction\u003cbr\u003e\u003cbr\u003eDirect replacement for factory plastic housing cap\u003cbr\u003e\u003cbr\u003eIntegrated oil pressure bypass system\u003cbr\u003e\u003cbr\u003eEliminates risk of cracking and oil leaks\u003cbr\u003e\u003cbr\u003eIncludes factory-spec O-ring for proper sealing\u003cbr\u003e\u003cbr\u003eCompatible with OEM and MMX performance oil filters\u003cbr\u003e\u003cbr\u003eNote: Prolonged exposure to extreme heat may cause slight changes to the anodized finish over time. This is inherent to anodized aluminum and does not affect performance or function.\u003c\/span\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089037062426,"sku":"MMR17-1501","price":158.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/53139893787_e9a582a70c_b.jpg?v=1776360579"},{"product_id":"mmx-performance-f2x-f3x-billet-differential-insert-set","title":"MMX Performance F2X \/ F3X Billet Differential Insert Set","description":"\u003cp\u003eDesigned and engineered in-house in the UK, the MMR differential insert kit for the BMW F2x and F3x chassis is designed to limit movement in the factory diff mounts to maintain proper suspension geometry when cornering and improve the responsiveness of the rear suspension and diff. Installation is very simple, can be performed in under an hour, and is completely reversible.\u003c\/p\u003e\n\u003cp\u003eBy filling small voids in the four factory mounts as well as limiting vertical movement, the insert set eliminates the associated slop to ensure that you experience a more refined, connected driving experience, especially when driving at the limit. The billet aluminum parts will not wear over time and offer a lasting performance improvement.\u003c\/p\u003e\n\u003cp\u003eWorried about noise? NVH is a measurement of how much noise, vibration, \u0026amp; harshness gets transmitted into a vehicle’s cabin. Based on feedback, MMR inserts transfer little to none NVH into the cabin. NVH is subjective, so some users may find NVH to be increased or decreased from our rating. If you are experiencing higher than quoted NVH with this product, please evaluate the installation to ensure the components are installed correctly.\u003c\/p\u003e\n\u003cp\u003eThe BMW F2x and F3x series use rubber diff mounts that deflect under load, causing the rear end to feel vague and loose, as well as leading to less-than-optimal suspension geometry and increased understeer. These precision-machined billet aluminum inserts are designed to fill voids in the factory diff mounts, and limit diff movement without sacrificing ride quality or introducing any perceivable additional noise, vibration, or harshness into the cabin. The result is a more refined, connected driving experience, as well as improved effectiveness of aftermarket rear sway bar upgrades and suspension components.\u003c\/p\u003e\n\u003cp\u003eThese inserts were tested extensively by MMR and independent BMW enthusiasts before release on multiple F2x and F3x vehicles. Our diff inserts fit diesel, petrol, manual and auto variants.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlack Anodized 6061-T6 Billet Aluminum with stainless setter retaining\u003c\/li\u003e\n\u003cli\u003eDesigned to reduce differential movement while keeping NVH to a minimum\u003c\/li\u003e\n\u003cli\u003eReduces differential movement under acceleration, gear shift and deceleration\u003c\/li\u003e\n\u003cli\u003eFills OE bushes voids to minimize component movement\u003c\/li\u003e\n\u003cli\u003eSimple installation with differential remaining installed\u003c\/li\u003e\n\u003cli\u003eHelps maintain correct suspension geometry under dynamic loading\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF20 1-Series\u003c\/li\u003e\n\u003cli\u003eF22 \/ F23 2-Series\u003c\/li\u003e\n\u003cli\u003eF3X 3-Series\u003c\/li\u003e\n\u003cli\u003eF3X 4-Series\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089037095194,"sku":"MMR12-6001","price":163.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/53331666308_8e0c16d298_b.jpg?v=1776360580"},{"product_id":"mmx-performance-oil-plug-replacement-crush-washer-set","title":"MMX Performance Oil Plug Replacement Crush Washer Set","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-sheets-root=\"1\"\u003eThe MMX Performance Oil Plug Replacement Crush Washer Set is designed to ensure a proper, leak-free seal every time you service your vehicle. This set includes five M12 replacement crush washers, making it ideal for routine oil changes or maintaining your existing MMX drain plug hardware.\u003cbr\u003e\u003cbr\u003eCrush washers play a critical role in preventing oil seepage by deforming slightly as the drain plug is tightened, creating a secure seal against the oil pan. Reusing worn or flattened washers can lead to leaks and inconsistent torque values. The mmx crush washer set provides a simple and reliable solution, ensuring correct sealing and peace of mind at every oil service.\u003cbr\u003e\u003cbr\u003eManufactured to precise tolerances, the MMX Performance Oil Plug Replacement Crush Washer Set is fully compatible with MMX oil sump drain plugs and other M12 applications requiring a crush-style sealing washer. Keeping a spare set on hand helps streamline maintenance and avoids unnecessary downtime during oil changes.\u003cbr\u003e\u003cbr\u003eThis mmx performance oil plug crush washer set is an essential service item for enthusiasts who value proper maintenance and attention to detail.\u003cbr\u003e\u003cbr\u003eKey Features \u0026amp; Benefits:\u003cbr\u003e\u003cbr\u003eSet of five M12 replacement crush washers\u003cbr\u003e\u003cbr\u003eDesigned for oil sump drain plug applications\u003cbr\u003e\u003cbr\u003eEnsures proper sealing and leak prevention\u003cbr\u003e\u003cbr\u003eIdeal for routine oil service and maintenance\u003cbr\u003e\u003cbr\u003eCompatible with MMX oil plug applications\u003cbr\u003e\u003cbr\u003eNote: Oil sump drain plug not included.\u003c\/span\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089037160730,"sku":"MMR03-0511","price":13.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/53318934118_efb4fc7815_b_18f4e706-9097-41ff-a83f-622578d9bfcc.jpg?v=1776360580"},{"product_id":"mmx-g8x-m2-m3-m4-adjustable-rear-sway-bar-link-set","title":"MMX G8X M2 \/ M3 \/ M4 Adjustable Rear Sway Bar Link Set","description":"\u003cp class=\"font_0 wixui-rich-text__text\"\u003e\u003cspan class=\"wixui-rich-text__text\"\u003e\u003cspan class=\"color_15 wixui-rich-text__text\"\u003eOur rear sway bar end links (drop links) replace the soft factory rubber bushings with their weak plastic bodies with these beautifully engineered adjustable aluminum billet replacements. Designed with one aim in mind: to help achieve optimum suspension performance and geometric accuracy, and thus increase the effectiveness of your rear anti-roll bar.\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"wixui-rich-text__text\"\u003e\u003cspan class=\"color_15 wixui-rich-text__text\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"font_0 wixui-rich-text__text\"\u003e\u003cspan class=\"wixui-rich-text__text\"\u003e\u003cspan class=\"color_15 wixui-rich-text__text\"\u003e\u003cspan\u003eFully adjustable to zero the pre-load on the anti-roll bar geometry. Our clever design means that adjustment can be carried out at both ends whilst the drop links are in-situ, making neutral positioning much easier.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"font_0 wixui-rich-text__text\"\u003e\u003cspan class=\"wixui-rich-text__text\"\u003e\u003cspan\u003eDesigned with one aim in mind: to help achieve optimum suspension performance and geometric accuracy, and thus increase the effectiveness of your rear anti-roll bar.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eEach heavy-duty, high-articulation rear drop link attaches the rear anti roll bar ends to the lower suspension arm. Replacing the failure-prone, weak plastic OEM links with our rigid billet aluminum links greatly reduces flex and allows a sharp, uncompromised transfer of suspension movement through to the sway bar.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eAs well as the link itself, extra stiffness and precision comes from replacing the flex-prone stock plastic ball joint with motorsport-spec ball joints. An especially valuable upgrade on older, higher mileage car\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eManufactured from Aircraft grade T6-6061 aluminum billet\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eComplete OE replacements\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOur single threaded ends make for easy length adjustment in-situ without having to detach and re-attach\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEach heavy-duty, high-articulation rear drop link\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAnodized in signature MMX Gloss black\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHeavy-duty ball joints to ensure a long life span\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCan be used with either factory or Aftermarket rear anti roll bar, and returned to standard at any time\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRubber boots for longevity and durability.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089037291802,"sku":"MMR24-5000","price":237.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/54121120081_08bfc05811_b_b52bdb18-3c42-4490-a2e8-120e74a332cb.jpg?v=1776360580"},{"product_id":"mmx-performance-magnetic-differential-oil-drain-plug-m22x1-5","title":"MMX Performance Magnetic Differential Oil Drain Plug - M22x1.5","description":"\u003cp\u003eThe MMX Performance Magnetic Differential Oil Drain Plug – M22x1.5 is a simple yet highly effective upgrade designed to protect your differential from premature wear while improving long-term reliability. As differentials operate under load, microscopic ferrous particles are naturally created through gear contact and friction. These particles remain suspended in the oil and continuously circulate through the system, gradually contributing to internal wear.\u003c\/p\u003e\n\n\u003cp\u003eThe MMX magnetic differential plug addresses this issue with a high-strength integrated magnet featuring a large surface area designed to capture and retain harmful metallic debris before it can continue circulating. By removing these contaminants from the oil, lubrication remains more effective, helping to reduce wear and extend the lifespan of critical differential components, especially in high-performance or aggressively driven vehicles.\u003c\/p\u003e\n\n\u003cp\u003eManufactured from T6-6061 lightweight aluminum, the plug offers an ideal balance of strength, durability, and weight savings. It is finished in a durable anodized coating for corrosion resistance and a clean OEM+ appearance, while maintaining precise fitment as a direct replacement for the factory plug.\u003c\/p\u003e\n\n\u003cp\u003eA cost-effective and preventative upgrade, the MMX Performance Magnetic Differential Oil Drain Plug – M22x1.5 is an essential addition for enthusiasts looking to maintain drivetrain health during routine service intervals.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMMX Performance magnetic differential oil drain plug – M22x1.5 thread\u003c\/li\u003e\n\u003cli\u003eIntegrated high-strength magnet captures ferrous metal particles\u003c\/li\u003e\n\u003cli\u003eLarge magnetic surface area for improved debris collection\u003c\/li\u003e\n\u003cli\u003eCNC-machined from T6-6061 lightweight aluminum\u003c\/li\u003e\n\u003cli\u003eDurable anodized finish for corrosion resistance and OEM+ appearance\u003c\/li\u003e\n\u003cli\u003eHelps maintain cleaner differential oil and improve lubrication efficiency\u003c\/li\u003e\n\u003cli\u003eReduces internal wear and extends differential lifespan\u003c\/li\u003e\n\u003cli\u003eDirect replacement for factory differential drain plug\u003c\/li\u003e\n\u003cli\u003eIncludes sealing washer\u003c\/li\u003e\n\u003cli\u003eMatches OEM torque specifications\u003c\/li\u003e\n\u003cli\u003eSimple installation during routine differential service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eVehicle Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll BMW and MINI differentials with M22x1.5 thread\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eRecommended Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/mmr-performance-magnetic-oil-sump-drain-plug-m12x1-5?variant=42325604434116\" target=\"_blank\"\u003eMMX Performance Magnetic Oil Sump Drain Plug – M12x1.5\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSKU: MMR03-0503\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in the UK\u003c\/li\u003e\n\u003cli\u003eDirect OE replacement\u003c\/li\u003e\n\u003cli\u003eFits differentials with M22x1.5 thread\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089037553946,"sku":"MMR03-0503","price":37.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/mmx-bmw-magnetic-differential-oil-drain-plug-m22x1-5-black-anodized-white-background.jpg?v=1776360580"},{"product_id":"mmx-performance-bmw-f40-m135i-xdrive-lowering-spring-set","title":"MMX Performance BMW F40 M135i xDrive Lowering Spring Set","description":"\u003cp\u003eThe MMX Performance lowering springs for the BMW M135i model delivers the perfect blend of improved dynamics and enhanced looks, yet without sacrificing ride quality. The 25-20mm drop in ride height brings the M-Lite to life making it feel lighter, more direct and with significantly sharper turn-in. Specifically designed by us for the M-Lites.\u003c\/p\u003e\n\u003cp\u003eFinished in MMX metallic grey, our springs are developed to be fully compatible with cars fitted with either static or dynamic dampers.\u003c\/p\u003e\n\u003cp\u003eThe MMX Performance lowering spring kit is one of our best-sellers. Little wonder, as they've earned a reputation for delivering the perfect blend of improved handling, enhanced looks, yet all without sacrificing ride quality.\u003c\/p\u003e\n\u003cp\u003eThe drop in ride-height makes a huge difference to the handling characteristics: by lowering the vehicle's centre of gravity, it reduces body roll for better dynamics, whilst maintaining the ride quality and comfort of your car.\u003c\/p\u003e\n\u003cp\u003eThanks to the carefully selected progressive spring rates the ride-quality remains unaffected and is actually nicer to drive at slower speeds. But push-on through the corners and the F4x chassis really comes to life, making it feel lighter, more direct and with significantly sharper turn-in.\u003c\/p\u003e\n\u003cp\u003eMeanwhile, the car's appearance is transformed. The Lowering Springs provide a drop at the front of 25mm whilst the rear sits lower by 20mm. This removes the inherent rake and makes the car sit more level and balanced between the front and rear. By getting rid of those nasty wheelarch gaps, it'll look just how it should have come from the factory!\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089037816090,"sku":"MMR08-0901","price":332.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/MMR08-09016.png?v=1776360582"},{"product_id":"mmx-performance-g8x-m2-m3-m4-height-adjustable-sport-spring-kit","title":"MMX Performance G8X M2 \/ M3 \/ M4 Height Adjustable Sport Spring Kit","description":"\u003cp\u003eUnlike conventional lowering springs, the MMR Height Adjustable Sport Spring kit for the current G87 M2, G80 M3, and G82 M4 gives you a fully customizable ride height adjustment. So however you want your car to sit, this Height Adjustable Spring (HAS) kit allows you to infinitely fine tune heights front and rear until you reach your ideal stance.\u003c\/p\u003e\n\u003cp\u003eBy retaining the Adaptive M dampers, this solution costs much less than upgrading to coilover suspension does - yet with the reassurance of keeping your high quality, sophisticated factory dampers in place. Best of both worlds, in other words.\u003c\/p\u003e\n\u003cp\u003eThe method of height adjustment is just the same as on a coilover suspension setup. Four adjustable perches fit underneath the Sport Springs. With a simple turn up or down on the threaded platform to change ride height, you can tailor it until reaches your perfect height and rake.\u003c\/p\u003e\n\u003cp\u003eThis generous sweep of adjustment provides a lowering range of 20-45mm on the front and 10-35mm at the rear (versus the factory ride height).\u003c\/p\u003e\n\u003cp\u003eThe Sport Springs themselves, finished in beautiful MMR Grey, are carefully developed progressive rate springs, with rates carefully chosen to match with the damper characteristics of the factory M3\/M4 G8x suspension.\u003c\/p\u003e\n\u003cp\u003eIt’s by specifying progressive rate Sport Springs that allows us to deliver the perfect blend of improved dynamics in hard driving, yet without sacrificing ride quality in normal us in the middle of the springs’ travel. Push-on through the corners and the G8x chassis really comes to life, making it feel lighter, more direct and with significantly sharper turn-in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits G87 M2 \/ G80 M3 \/ G82 M4 and Competition Models with xDrive\u003c\/li\u003e\n\u003cli\u003eCarefully optimized spring rates for improved driving dynamics\u003c\/li\u003e\n\u003cli\u003eDesigned to be compatible with Adaptive M factory dampers\u003c\/li\u003e\n\u003cli\u003eLowers vehicle by 20-45mm front | 10-35mm rear\u003c\/li\u003e\n\u003cli\u003ePowder coated in MMR Metallic Gunmetal Grey for a durable finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089038012698,"sku":"MMR08-1603","price":1152.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/MMR-G8X-HAS.jpg?v=1776360583"},{"product_id":"mmx-performance-billet-fuel-cap","title":"MMX Performance Billet Fuel Cap","description":"\u003cp\u003eThe MMX Performance Billet Fuel Cap is a precision-engineered upgrade designed to enhance one of the most frequently used touchpoints on your vehicle. Machined from a solid block of 6061 aerospace-grade aluminum, this cap replaces the factory plastic unit with a premium, durable solution that delivers a refined feel every time you refuel.\u003c\/p\u003e\n\u003cp\u003eFinished in a gloss Midnight Black anodized coating and laser-etched with the MMX logo, the cap provides a clean OEM+ appearance that complements both factory and modified vehicles. Each unit is CNC-machined using advanced 5-axis technology, then hand-finished to ensure a precise fit and long-lasting surface that resists fading, wear, and corrosion over time.\u003c\/p\u003e\n\u003cp\u003eBeyond aesthetics, the MMX billet fuel cap retains full OEM functionality. It features a new rubber O-ring seal, integrated pressure relief valve, and locating tether to ensure proper fuel tank pressure and ease of use. The cap securely fits into the factory holder during refueling and closes with a satisfying engineered click, reinforcing its premium construction.\u003c\/p\u003e\n\u003cp\u003eA simple yet rewarding upgrade, the MMX Performance Billet Fuel Cap adds a level of quality and attention to detail that is experienced every time the fuel door is opened.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMMX Performance billet fuel filler cap\u003c\/li\u003e\n\u003cli\u003eCNC-machined from 6061 aerospace-grade aluminum\u003c\/li\u003e\n\u003cli\u003eAdvanced 5-axis machining for precise fitment\u003c\/li\u003e\n\u003cli\u003eGloss Midnight Black anodized finish\u003c\/li\u003e\n\u003cli\u003eLaser-etched MMX logo\u003c\/li\u003e\n\u003cli\u003eIncludes new rubber O-ring seal\u003c\/li\u003e\n\u003cli\u003eIntegrated pressure relief valve maintains proper tank pressure\u003c\/li\u003e\n\u003cli\u003eIncludes locating tether for OEM-style usability\u003c\/li\u003e\n\u003cli\u003eFits securely in factory holder during refueling\u003c\/li\u003e\n\u003cli\u003eDurable finish resists fading, corrosion, and wear\u003c\/li\u003e\n\u003cli\u003eDirect replacement for factory plastic fuel cap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW models (1997+)\u003c\/li\u003e\n\u003cli\u003eMINI models\u003c\/li\u003e\n\u003cli\u003eToyota Supra A90 \/ A91\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSKU: MMR03-1501\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in the UK\u003c\/li\u003e\n\u003cli\u003eRetains full OEM functionality and fitment\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089038405914,"sku":"MMR03-1501","price":136.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/mmx-bmw-billet-fuel-cap-black-anodized-white-background.jpg?v=1776360586"},{"product_id":"mmx-performance-vehicle-emblem","title":"MMX Performance Vehicle Emblem","description":"\u003cp\u003ecar badge is just what is needed to differentiate your car from all the the rest.\u003c\/p\u003e\n\u003cp\u003eOur new car badge comes in your choice of bright chrome or gloss black to suit your car's color scheme. Each badge is100mm long, and made from high quality injection molded ABS, supplied with strong 3M self-adhesive backing for simple fixing.\u003c\/p\u003e\n\u003cp\u003eIn your choice of bright chrome or gloss black.\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Silver","offer_id":52089038340378,"sku":"MMR35-1503","price":12.77,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":52089038373146,"sku":"MMR35-1504","price":12.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/MMR35-15037.png?v=1776360586"},{"product_id":"mmx-performance-f8x-m2-m3-m4-rp650-performance-brake-pad-set-front","title":"MMX Performance F8X M2 \/ M3 \/ M4 RP650 Performance Brake Pad Set - Front","description":"\u003cp\u003eDrive your M-car hard and the chances are you’ve experienced brake fade at some point. That’s where our High Performance RP650 Brake Pads come in. A simple replacement for your factory pads using the standard braking hardware, they deliver a much higher resistance to high temperature fade. This makes them perfect for fast road driving and even occasional track day use, yet without any compromise in daily driving.\u003c\/p\u003e\n\u003cp\u003eA lot of our compound testing focused on developing a pad that finds that sweet-spot between excellent cold bite and high temperature fade resistance. The result is a medium aramid fiber compound with friction coefficient of 0.42mu in the temperature range of 450 – 650°C.\u003c\/p\u003e\n\u003cp\u003eThis compound is the secret to how our high-performance RP650 brake pads provide superior stopping power and reliable performance under even the most demanding conditions yet without requiring a warmup period - essential for cars that have to perform perfectly in daily driving duties yet stand up to the demands of fast road and occasional track use.\u003c\/p\u003e\n\u003cp\u003eAs well as outright performance, another key development focus has been around perfecting pedal feel - resulting in progressive braking with unparalleled pedal response underfoot. The slotted and chamfered construction ensures quiet and smooth braking.\u003c\/p\u003e\n\u003cp\u003eMeanwhile, our RP650 brake pads are designed to last longer than traditional brake pads, reducing the need for frequent replacements - even saving you money in the long run. This also means that the pads produce less dust than traditional brake pads, keeping your wheels cleaner and reducing the need for frequent cleaning.\u003c\/p\u003e\n\u003cp\u003eFinally, it’s a legal requirement in most countries for brake pads to carry ECE-R90 certification – yet many other aftermarket pads do not. Not only is this ECE-R90 standard essential for legality (and potentially your insurance validity), this regulation gives you the peace of mind that the pads are tested and approved for cold performance, speed, sensitivity, friction behavior, compressibility, shear and hardness. So, the pads will work just as well when cold as when up to full track temperatures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePerfect for fast road use\u003c\/li\u003e\n\u003cli\u003ePublic highway legal – R90 Approved\u003c\/li\u003e\n\u003cli\u003eWorks from cold – excellent cold bite and high temperature fade resistance\u003c\/li\u003e\n\u003cli\u003eSuitable for short use track days\u003c\/li\u003e\n\u003cli\u003eDue to bedding in material – bedding in happens naturally over the first 100-200 miles in urban driving\u003c\/li\u003e\n\u003cli\u003eQuiet and smooth braking \/ shimmed \/ slotted \/ chamfered construction\u003c\/li\u003e\n\u003cli\u003eResponsive pedal feel for progressive braking\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089038536986,"sku":"MMR27-1001F","price":302.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/53030581663_d66a21b459_b.jpg?v=1776360586"},{"product_id":"mmx-performance-g8x-m2-m3-m4-front-wheel-arch-clearance-kit","title":"MMX Performance G8X M2 \/ M3 \/ M4  Front Wheel Arch Clearance Kit","description":"\u003cp\u003eThe MMX Performance G8X M2 \/ M3 \/ M4 Front Wheel Arch Clearance Kit is a purpose-built solution designed to address one of the most common limitations when running aggressive wheel and tire setups on the G8X platform. The factory front arch liners incorporate brittle plastic cooling fins positioned directly in the tire’s path, which can lead to contact when running wider tires, lowered suspension, or wheel spacers.\u003c\/p\u003e\n\n\u003cp\u003eThe MMX clearance kit replaces this restrictive section with a precision-engineered aluminum grille, creating additional space where it matters most while maintaining proper airflow from the front bumper. This allows enthusiasts to confidently run more aggressive fitments without the risk of damaging the factory liner, tires, or surrounding components.\u003c\/p\u003e\n\n\u003cp\u003eManufactured in the UK from lightweight yet durable aluminum, each grille features a laser-cut hexagonal pattern for optimal strength and airflow. The components are finished in a durable black powder coat, delivering a clean OEM+ appearance behind the front bumper openings while providing long-term resistance to road debris and environmental exposure.\u003c\/p\u003e\n\n\u003cp\u003eDesigned as a functional upgrade for modified vehicles, the MMX Front Wheel Arch Clearance Kit is ideal for cars running spacers, wider tires, or lowered suspension. By increasing clearance at the critical heat exchanger exit area, it helps prevent tire contact while preserving airflow and system efficiency.\u003c\/p\u003e\n\n\u003cp\u003eInstallation requires removal of the factory vented section of the arch liner, after which the MMX grilles are securely mounted using the supplied hardware for a stable and long-lasting fit.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMMX Performance front wheel arch clearance kit for BMW G8X platform\u003c\/li\u003e\n\u003cli\u003eIncreases inner clearance for aggressive wheel and tire setups\u003c\/li\u003e\n\u003cli\u003eReplaces restrictive factory plastic cooling fin section\u003c\/li\u003e\n\u003cli\u003eHelps prevent tire contact under load and at full steering lock\u003c\/li\u003e\n\u003cli\u003eMaintains proper airflow from front bumper ducting\u003c\/li\u003e\n\u003cli\u003eManufactured from lightweight aluminum\u003c\/li\u003e\n\u003cli\u003eLaser-cut hexagonal grille design for strength and airflow\u003c\/li\u003e\n\u003cli\u003eDurable black powder-coated finish\u003c\/li\u003e\n\u003cli\u003eIncludes all required hardware and fixings\u003c\/li\u003e\n\u003cli\u003eSecure mounting with four fixings per side\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eVehicle Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/collections\/m2-g87\" target=\"_blank\"\u003eBMW G87 M2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/collections\/m3-g80\" target=\"_blank\"\u003eBMW G80 \/ G81 M3\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/collections\/m4-g82-g83\" target=\"_blank\"\u003eBMW G82 \/ G83 M4\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eRecommended Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/rkp-g8x-m3-m4-enhanced-clearance-front-fender-liner-set?pr_prod_strat=pinned\u0026amp;pr_rec_id=4dac6c8fc\u0026amp;pr_rec_pid=7235125739716\u0026amp;pr_ref_pid=8259514400964\u0026amp;pr_seq=uniform\" target=\"_blank\"\u003eRKP G8X M3 \/ M4 Enhanced Clearance Front Fender Liner Set (Pre-Installed MMX Kit)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSKU: MMR45-1602\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in the UK\u003c\/li\u003e\n\u003cli\u003eInstallation requires cutting and removal of the factory vented liner section\u003c\/li\u003e\n\u003cli\u003eDesigned for use with lowered suspension, wider tires, and spacer setups\u003c\/li\u003e\n\u003cli\u003eFinal clearance will vary based on wheel and tire specifications\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089038995738,"sku":"MMR45-1602","price":233.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/mmx-g8x-m2-m3-m4-front-wheel-arch-clearance-kit-white-background.jpg?v=1776360589"},{"product_id":"mmx-performance-bmw-f-chassis-n20-cotton-panel-air-filter","title":"MMX Performance BMW F-Chassis N20 Cotton Panel Air Filter","description":"\u003cp\u003eLooking for a simple, power-boosting upgrade for your N20-Powered BMW? The MMR panel filter is one of the easiest ways to upgrade the breathing abilities of your 2.0L lump.\u003c\/p\u003e\n\u003cp\u003eFitting is very straightforward and installed in around 10 minutes, and easily returned to standard, should you ever wish. Not to mention, completely washable and reusable.\u003c\/p\u003e\n\u003cp\u003eBy removing the inevitable restrictions that the standard paper panel filter gives, our panel filter allows a worthwhile increase in airflow through to the turbo.\u003c\/p\u003e\n\u003cp\u003eWe've developed our own range of MMR Performance cotton gauze filters that easily drop into the OE airbox which provide excellent filtration properties, combined with instant performance increases and induction noise enhancements.\u003c\/p\u003e\n\u003cp\u003eMeanwhile, OEM-standards of design, quality, materials and construction means it fits like a factory part, lasts like a factory part. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003ePut simply, we're confident that these are the best panel air filters you can buy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e Fits F2x 1 and 2-Series \/ F3x 3 and 4-Series N20-powered models.\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089039552794,"sku":"MMR01-0702","price":102.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/51388580134_3977c840fc_b.jpg?v=1776360593"},{"product_id":"mmx-performance-bmw-f-chassis-n55-elite-series-panel-air-filter","title":"MMX Performance BMW F-Chassis N55 Elite Series Panel Air Filter","description":"\u003cp\u003eSearching for the ultimate air filter for your 3.0L N55 BMW? Discover the MMX Performance Elite Series panel filter—a premium, tri-foam, direct OE replacement for BMW F-Series vehicles. Crafted with cutting-edge techniques and materials inspired by Formula 1, World Rally, and Touring Cars, this filter sets the benchmark for performance and innovation.\u003c\/p\u003e\n\u003cp\u003eThe same precision engineering, advanced technology, and meticulous attention to detail that define elite motorsport components are applied to our Elite Series filters. Designed for both road and competition use, they deliver unparalleled quality and performance.\u003c\/p\u003e\n\u003cp\u003eOur panel filter eliminates the airflow restrictions inherent in standard paper filters, enabling a significant boost in airflow to the turbo. Designed to fit seamlessly into the OE airbox, the MMX Performance foam filters offer outstanding filtration, immediate performance gains, and enhanced induction sound.\u003c\/p\u003e\n\u003cp\u003eCrafted to OEM standards for design, quality, materials, and durability, these filters provide a factory-perfect fit and long-lasting reliability.\u003c\/p\u003e\n\u003cp\u003ePut simply, we believe these are the best panel air filters you can buy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorthwhile increase in power and torque\u003c\/li\u003e\n\u003cli\u003eFitting is very straightforward and installed in around 10 minutes\u003c\/li\u003e\n\u003cli\u003eEasily returned to standard, should you ever wish\u003c\/li\u003e\n\u003cli\u003eSpecifically designed for the BMW N55\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eKit complete with everything you need\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52089039749402,"sku":"MMR01-HMP-795","price":75.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/MMR01-HMP-7954.png?v=1776360593"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/collections\/MMX-Performance-Logo-Collection.jpg?v=1776365521","url":"https:\/\/race-centric.com\/collections\/mmx-performance.oembed?page=9","provider":"Racecentric","version":"1.0","type":"link"}