{"product_id":"ap-racing-8250-standard-4-piston-caliper-seal-kit-44-5mm-47-6mm-1-750-1-875","title":"AP Racing 8250 Standard 4 Piston Caliper Seal Kit 44.5mm\/47.6mm (1.750\"\/1.875\")","description":"\u003ch2\u003eBrake Caliper, Seals \u0026amp; Temperature\u003c\/h2\u003e\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\r\n                \u003cdiv\u003e\r\n                                            Because race brake calipers are sometimes subjected to very high\r\nand unpredictable operating temperatures, they must be examined and\r\nseals must be replaced on a regular basis to maintain efficiency\r\nand safety. Seal life is governed by time at temperature which\r\nshould  therefore be kept as low as possible by provision of\r\ncooling airflow. For guidance only AP Racing offer the following\r\nrecommendations (temperatures measured on outside of caliper\r\nadjacent to logo):   \u003cstrong\u003e- Calipers that regularly run at\r\nup to 200°C - Re-seal every other event.\u003c\/strong\u003e \u003cstrong\u003e-\r\nCalipers that run intermittently from 200°C to 220°C abd above -\r\nRe-seal as soon as possible.\u003c\/strong\u003e \u003cstrong\u003e- Reduce \"soak\"\r\ntemperatures after the car has come to rest where possible (e.g. do\r\nnot leave foot on brake pedal when stationary with hot brakes) as\r\nthis can cause excessive caliper temperatures.\u003c\/strong\u003e\r\n                                    \u003c\/div\u003e\r\n            \u003c\/div\u003e\r\n\r\n        \u003c\/div\u003e\r\n    \u003c\/div\u003e                \u003cdiv id=\"pspecs\" class=\"pdetail\"\u003e\n\u003cp\u003eKit includes:\u003c\/p\u003e\n\u003cp\u003e2 x 1.750\" high temperature piston seals\u003c\/p\u003e\n\u003cp\u003e2 x1.875\" high temperature piston seals\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e                                \u003cdiv id=\"pwfi\" class=\"pdetail\"\u003e\n\u003ch2\u003eREPLACING CALIPER SEALS\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e(wearing nitrile gloves is recommended)\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003e\u003cstrong\u003eIMPORTANT: DO NOT USE PETROLEUM, GASOLINE, OR MINERAL OIL BASED CLEANERS OR LUBRICANTS AS THESE WILL DAMAGE THE SEALS.\u003c\/strong\u003e\u003c\/u\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1. \u003c\/strong\u003eSoak new seals in brake fluid for a minimum of 30 minutes.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. \u003c\/strong\u003eClean caliper with warm soapy water and dry off.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. \u003c\/strong\u003eWith the pads removed, insert a brake disc or block into the center of the caliper. Using either hydraulic pressure or compressed air, carefully extend all pistons against the disc or block. Remove block and remove pistons.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4. \u003c\/strong\u003eCarefully remove old seals with a narrow blunt-edged tool. A dull pick works best.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5. \u003c\/strong\u003eEnsure that caliper bores, seal grooves and pistons are clean and free from debris and moisture. Cotton swabs work well here. \u003cstrong\u003e\u003cu\u003eUse only alcohol-based cleaning fluid\u003c\/u\u003e.\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6. \u003c\/strong\u003eCarefully fit replacement seal into groove in caliper body. Check seals are free from damage and correctly seated in groove, not twisted or kinked. If using angle cut seals, ensure paint dots are facing away from disc.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7. \u003c\/strong\u003eWipe the outside of the piston with a small amount of brake fluid for extra lubrication.\u003cstrong\u003e \u003c\/strong\u003eCarefully engage piston into caliper bore and, using your fingers, push pistons fully into body.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: Excessive force should not be necessary. \u003c\/strong\u003e\u003cstrong\u003eIf piston does not slide smoothly into bore, remove \u0026amp; check that seal has been fitted correctly.\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003c\/div\u003e                                                \u003cdiv id=\"previews\" class=\"pdetail\"\u003e\n                    \u003ca href=\"https:\/\/www.essexparts.com\/review\/3787\" target=\"_blank\" class=\"btn ilb\"\u003eLeave a Review\u003c\/a\u003e\n                    \u003cdiv class=\"clear\"\u003e \u003c\/div\u003e\n\n                    \n                                    \u003c\/div\u003e\n                                        \u003c!-- end product details --\u003e\n    \u003c!-- end container --\u003e\n\u003c!-- end product additional --\u003e\n\n\u003cmeta name=\"_token\" content=\"GA2RoksjaoLjnXXw4trVoZO97PhBLpkYA3fKgrfM\"\u003e\n\n\n    \n        \u003c!-- \/End Main Layout --\u003e\n                    \u003cdiv id=\"footer\"\u003e\n    \u003cdiv class=\"container\"\u003e\n        \n        \u003cdiv class=\"contact\"\u003e\n            \u003cdiv class=\"cms-block\"\u003e\n\u003cp\u003e\r\n\t125 Hampton Court\r\n\t\u003cbr\u003e\r\n\tCramerton, NC 28032\r\n\t\u003cbr\u003e\r\n\t\u003cstrong\u003eP:\u003c\/strong\u003e\u003ca onclick=\"ga('send', 'event', { eventCategory: 'general', eventAction: 'click', eventLabel: 'call', eventValue: 1});\" href=\"tel:704-824-6030\" value=\"+17048246030\" target=\"_blank\"\u003e704.824.6030\u003c\/a\u003e\r\n\t\u003cbr\u003e\r\n\t\u003ca href=\"tel:704-824-7300\" value=\"+17048247300\" target=\"_blank\"\u003e\u003c\/a\u003e\r\n\u003c\/p\u003e\n\u003cp\u003ePart number: 08 04 916.\u003c\/p\u003e\n\u003cp\u003eConfirm fitment for your application before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"AP Racing","offers":[{"title":"Default Title","offer_id":53513248014618,"sku":"08 04 916","price":63.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/4_piston_seal_kit.jpg?v=1794994086","url":"https:\/\/race-centric.com\/products\/ap-racing-8250-standard-4-piston-caliper-seal-kit-44-5mm-47-6mm-1-750-1-875","provider":"Racecentric","version":"1.0","type":"link"}