{"product_id":"ap-racing-by-essex-2-piece-spline-drive-competition-j-hook-disc-pair-rear-380x30mm-porsche-981-718-cayman-gt4-clubsport","title":"AP Racing 2-piece Spline Drive Competition J Hook Disc Pair (Rear 380x30mm)- Porsche 981 718 Cayman GT4 Clubsport","description":"\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/981_clubsport_disc_pair_1200.jpg\"\u003e\r\n\u003c\/p\u003e\u003cp\u003eAP Racing J Hook Discs are the epitome of endurance racing components.  They will hold \r\nup extremely well to any abuse you plan to throw at them. These discs \r\nhave been proven time and again in professional racing, winning many \r\nraces and championships (ALMS, Rolex, Grand Am, etc.).\r\n\u003c\/p\u003e\u003ch2\u003eNew Spline Drive Attachment Method\u003c\/h2\u003e\u003cp\u003eThe Essex Spline Drive mounting system uses technology from current pro racing discs and has several advantages over traditional attachment methods (\u003ca href=\"https:\/\/www.essexparts.com\/the-fundamentals-of-2piece-disc-attachment-methods\" target=\"_blank\"\u003emore info on the Essex Blog\u003c\/a\u003e). Rather than 10 to 12 mounting tabs with slots machined out internally for bobbins, there are 20 smaller mounting tabs that function as slots themselves. Instead of a steel bobbin providing float at each mounting point, it is accomplished with iron tabs that mesh seamlessly around the disc with the corresponding aluminum tabs of the hat. In this manner, the entire disc assembly is both simplified and strengthened.\r\n\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/spline_drive_close_up_1200.jpg\"\u003e\u003c\/u\u003e\u003c\/strong\u003e\r\n\u003c\/p\u003e\u003cp\u003eOur Spline Drive system eliminates the need for any type of bobbin, while also dispersing stresses across twice as many locations on the disc. The interlocking tabs not only provide the necessary room for radial float as the disc heats and expands, but also act as splines to directly transfer the torque under braking.\r\n\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/spline_drive_disc_revised_arrows_1200.jpg\"\u003e\u003cspan class=\"redactor-invisible-space\"\u003e\u003c\/span\u003e\u003c\/u\u003e\u003c\/strong\u003e\r\n\u003c\/p\u003e\u003cp\u003eWith the tabs handling load transfer, the fastener portion of the new Spline Drive assembly is quite different and much simpler. On a traditional float-in-disc design (below), each of the 10 to 12 load-bearing fasteners is pulling double duty, and must be thick enough to transfer brake torque and hold everything together at the same time. \u003cbr\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/bobbin_drive_disc_arrows_revised_1200.jpg\"\u003e\r\n\u003c\/p\u003e\u003cp\u003eThe Spline Drive system eliminates half of the pieces found in a traditional bobbin drive hardware stack. Whereas our float-in-disc stack contains six pieces (below left), our Spline Drive setup requires only three: a bolt, retainer, and jet nut (below right). Since they are not load-bearing, the new fasteners are smaller in thickness at 5mm and don’t require as high of a torque value. Finally, when swapping to fresh replacement iron rings, only the jet nut must be replaced each time, reducing the cost of consumables.\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/bobbin_bolt_stack_vs_spline_drive.jpg\" alt=\"bobbin_bolt_stack_vs_spline_drive.jpg\"\u003e\r\n\u003c\/p\u003e\u003ch3\u003eTraditional Bobbin Drive Hardware Design:\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/boltstack_57.jpg\"\u003e\r\n\u003c\/p\u003e\u003ch3\u003eNew Spline Drive Hardware Design:\u003c\/h3\u003e\u003cp\u003e\u003cbr\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/spline_drive_bolt_stack_labeled_rev2_1001.jpg\"\u003e\r\n\u003c\/p\u003e\u003cp\u003eTo provide axial float that also mitigates knockback and offers consistent pedal effort, we've integrated float-control springs into several recesses in the aluminum hat. They are completely encapsulated once assembled, so there's less of a chance for these springs to be bent or damaged vs. traditional anti-knockback (AKB) spring clips. \u003cbr\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cu\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/tooth_drive_disc_spring_fade_shot_cropped_1200.jpg\"\u003e\u003c\/strong\u003e\u003c\/u\u003e\u003c\/u\u003e\r\n\u003c\/p\u003e\u003cp\u003eAnother unique benefit of the Spline Drive system is an extremely low profile on the inside of the disc assembly, providing an undisturbed entry path for cooling air through the vanes (see below).\r\n\u003c\/p\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/spline_drive_disc_low_angle_1200.jpg\"\u003e\u003cp\u003e\u003cbr\u003e\r\n\u003c\/p\u003e\u003cp\u003eFinally, the elegant hardware packaging provides an incredibly clean aesthetic when viewed from the outside. The only visible piece of hardware is the bolt head, and everything else is hidden inside the disc.\u003cbr\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/spline_drive_981_disc_hat_outside_close_1200_rev.jpg\"\u003e\r\n\u003c\/p\u003e\u003ch3\u003eInternal Vane Quantity and Quality\u003c\/h3\u003e\u003cp\u003eThe\r\n internal vane design on AP J Hook Discs is quite a bit different vs. \r\nOEM-style discs and other brands of aftermarket discs. Many OEM discs \r\nfeature a pillar vane design, which can be thought of \r\nas a group of posts or pillars connecting the two disc halves together \r\n(see pic below). \r\n The pillars are not organized linearly from the outside to the inside \r\nof the disc, and turbulence is created as air flows through and among \r\nthem.  Pillar vane discs are therefore not particularly well suited to \r\nheat evacuation.   The goals of a pillar vane design are disc face \r\nstability for low NVH (noise, vibration, harshness), and a low cost of \r\nproduction.  Pillar vanes are non-directional, and the same part number \r\nis \r\nused on both sides of the car (again for cost reduction). Other OEM \r\ndiscs feature a straight, non-directional internal vane.  While that \r\ntype of vane flows more air than a pillar, it does not move nearly as \r\nmuch air as the directional vanes featured in AP Racing's discs.  Having\r\n directional vanes means that AP Racing discs are handed.  There is a \r\nunique left disc and a right disc in each pair, and they cannot be \r\nswapped from side-to-side on the car.  The orientation of the vanes is \r\noptimized to spin in a certain direction, pumping the maximum amount of \r\nair possible through the disc.  The shape of these internal vanes is \r\nalso optimized to promote smooth airflow.\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/left_right%20illustration_3.jpg\"\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/Disc_CutOut_three_quarter_view_WEB.jpg\"\u003e\r\n\u003c\/p\u003e\u003cp\u003eIn\r\n addition to having a superior internal vane design, AP Racing discs \r\nhave far more of\r\n them!  Most aftermarket discs have 30 to 48 vanes. After extensive \r\nCFD and thermal stress analysis, AP designed the Competition J Hook's \r\nwith a high vane count (typically 60 to 84 depending on application).  \r\nHaving more vanes increases airspeed and heat transfer through the disc,\r\n reduces air recirculation between vanes, and reduces \r\ndeflection at the disc face.  Compared to an OEM-style disc or \r\ncompetitor's 48 vane discs, the 60+ vane discs are less prone to coning,\r\n distortion, and cracking, while \r\nproviding less brake fade, reduced judder, more even pad contact, and a \r\nlonger service life.\r\n\u003c\/p\u003e\u003cp\u003eBelow is a comparison of a one-piece OEM \r\npillar vane disc and an AP Racing two-piece J Hook.  A few things to \r\nnote in these pictures: The AP Racing disc has a much wider air gap \r\nbetween the disc faces, allowing considerably more airflow into and \r\nthrough the disc.  The uniform, directional vane design also contributes\r\n heavily to superior airflow.\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/OEM_disc_vane_design_WEB_cropped.jpg\"\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/jhook_disc_vane_design_web_cropped_2.jpg\"\u003e\r\n\u003c\/p\u003e\u003cp\u003eMost\r\n of the cooling air that enters a brake disc comes from the back side of\r\n the discs, particularly if brake ducts are being employed.  The top \r\ndisc is an OEM pillar vane.  The second disc is an OEM dual-cast disc \r\n(which is technically a two-piece disc).  The bottom disc is the AP \r\nRacing J Hook.  Which of these discs do you think will flow the most \r\nair?  While the OEM discs have narrow inlet port and\/or obstructions \r\nblocking the disc vanes, the AP Racing disc offers a clear path for \r\ncooling air to enter and flow through the disc.  The result is \r\nsignificantly cooler discs that are less prone to cracking and wear.\r\n\t\u003cbr\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/OEM_disc_vane_design_inlet_WEB_cropped.jpg\"\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/frdiscairgap_dualcast_cropped_2.jpg\"\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/Jhook_disc_vane_design_inlet_WEB_cropped.jpg\"\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003c\/em\u003e\r\n\u003c\/p\u003e\u003ch3\u003eExclusive AP Racing J Hook Slot Pattern \u003c\/h3\u003e\u003cp\u003eWhen\r\n you cut a slot or drill a hole in a disc you impact heat transfer. The \r\narea around the slot or hole acts as a cool spot when the disc heats up,\r\n which is not ideal. Ideally, heat is distributed uniformly around the \r\ndisc so it can be hit with the cooling air that is pumping through the \r\ndisc, radiate outwards away from the disc, etc.  Cool spots create \r\nstress risers and increase the likelihood of the disc cracking. They \r\nalso cause the face of the disc to distort unevenly, leading to uneven \r\npad deposits, vibration, and judder.\r\n\u003c\/p\u003e\u003cp\u003eThe OEM discs avoid this \r\nproblem by simply leaving the face blank.  While the risk for NVH goes \r\ndown, so does the pad bite and feel of the disc through the brake \r\npedal.  Competitive aftermarket offerings typically have straight slots,\r\n which tend to leave cool spots across the disc face between the slots.\r\n\t\u003cbr\u003e \u003cstrong\u003e\u003cbr\u003e \u003c\/strong\u003eDuring\r\n exhaustive R\u0026amp;D testing, AP's J Hook design was found to create a \r\nconstant pathway of evenly distorted material on the face of the disc.  \r\nThe hooks are spaced out as evenly as possible both around the \r\ncircumference of the disc, as well as from the inside edge (where the \r\nhat attaches) to outer edge, with a slight overlap to promote even heat \r\ndistribution\/distortion. In addition to reducing cracking, the even \r\nheating of the disc also helps provide an even transfer layer of pad \r\nmaterial on the disc when you bed them in.\r\n\t\u003cbr\u003e \u003cbr\u003e Additionally, the J \r\nHook slot pattern produces a greater number of leading edges for the \r\npads to bite into vs. a traditional curved slot pattern, and \r\nparticularly a plain-faced disc.  While this may lead to slightly more \r\nwhirring or scraping noises from the discs when applying the brakes, the\r\n benefits of more even heat distribution, less propensity to crack, \r\ncleaner pad material transfer during bed-in, and more bite far outweigh \r\nthe slight increase in NVH for the serious enthusiast.\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/jhook_two_web_3.jpg\"\u003e\r\n\u003c\/p\u003e\u003ch3\u003eFeature: Complex Metallurgy Developed Through 50+ Years of Experience \u003c\/h3\u003e\u003cp\u003eAP\r\n Racing has been designing brake components for more than 50 years.  \r\nThey've had their components on cars that have won more than 750 Formula\r\n 1 races!  On any given race weekend, AP J Hook discs can be \r\nfound on 75% or more of the NASCAR Sprint Cup grid.  AP has learned from\r\n these experiences, and have developed a proprietary iron alloy with \r\nextreme durability, designed specifically for what you intend to do with\r\n it (flog the hell out of it).  The primary objectives with OEM \r\ndiscs are simple: they must be cheap and easy to produce.  The design \r\nobjectives for these two products are vastly different.\r\n\u003c\/p\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/JHook_WEB.jpg\"\u003e\u003cp\u003e\r\n\t\u003cstrong\u003e\u003c\/strong\u003e\r\n\u003c\/p\u003e\u003ch3\u003eDisc Burnishing\/Bedding Service \u003c\/h3\u003e\u003cp\u003eIf\r\n your brake discs aren’t being properly prepared for abuse prior to \r\nflogging them on track, you’re exposing yourself to potential judder, \r\nvibration, and cracking issues.  We all know that prepping your pads and\r\n discs at the track can be difficult.  Doing so wastes time during the \r\nfirst session of the day, and it's a hassle and potentially dangerous \r\nfor other drivers as you go through the procedure.  Track time is \r\nexpensive and tough to come by. The more time you spend behind the wheel\r\n performing an elaborate bed-in procedure, the less time you’ll spend \r\ndoing hot laps.  Performing the procedure on-track also limits its \r\nrepeatability.  You can't control what's going on around you with track \r\nconditions, other drivers, etc., and many track configurations don't \r\nreally lend themselves to the constant start\/stop\/start required to do the\r\n job properly.\r\n\u003c\/p\u003e\u003cp\u003eEssex is now offering a solution via our \r\nprofessional burnishing service.  Previously reserved for our \r\nprofessional racing customers, we are now offering our retail customers \r\nthe option of having the discs in select Competition Brake Kits \r\npre-burnished at our factory.  We burnish thousands of discs for the top\r\n racing teams each year.  After countless hours of experimentation, and \r\nextensive feedback from the top drivers and teams, we can consistently \r\nsqueeze the most reliable performance out of AP Racing's discs.  The \r\nprocedure is incredibly repeatable, as it is performed on a \r\ncomputer-controlled machine by experienced technicians.\r\n\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e The cost of our \r\nburnishing service is only $50 \r\nper disc, making it an affordable, time-saving option that will produce \r\nfar more consistent and safer results than trying the procedure on your \r\nown.\r\n\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.essexparts.com\/pro-race-services\/patented-brake-disc-bedding--burnishing\" target=\"_blank\" data-mce-href=\"http:\/\/www.essexparts.com\/professional-racing\/pro-services\/brake-burnishing.html\"\u003eWatch a brief video of our disc burnishing service here.\u003c\/a\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/discs%20before%20and%20after%20burnish_2.jpg\"\u003e\r\n\u003c\/p\u003e\u003ch3\u003eReasonable Replacement Cost \u003c\/h3\u003e\u003cp\u003eLet's\r\n face it, no matter how good a brake disc is, it's still a consumable \r\nitem.  They're no different than brake pads or gasoline.  You beat them \r\nup until they crack to pieces, then you throw them away.  If replacement\r\n iron is too expensive, you're always driving in fear, waiting to shell \r\nout big bucks for a new set.  Despite having the most expansive set of \r\nfeatures on the market, \r\n\t\u003ca href=\"https:\/\/www.essexparts.com\/brake-discs\/ap-racing-competition-disc-replacement-rings\"\u003eour replacement iron rings\u003c\/a\u003e are completely affordable.\r\n\u003c\/p\u003e\u003cp\u003eGoing to the track is expensive!   \r\nEvent entrance fees, hotels, fuel, and tires all add up.  While you \r\nobviously want the best product available, you can't afford to pay a \r\nsmall fortune for something you're just going to destroy.  You can buy a\r\n cheap set of $150 discs for every event, have relentless heat issues, \r\nand find yourself constantly swapping them out.  When you do the math, \r\nthe long-term value of the AP J Hook's is tough to beat.  You'll enjoy \r\nall the benefits without breaking the bank, and you'll spend more time \r\ndriving and less time wrenching.\r\n\u003c\/p\u003e\u003cp\u003eElite level teams choose AP \r\nRacing discs because they know the work has been done to provide the \r\nbest available product at any price level.  The AP J Hook is a\r\n direct derivative of AP's vast racing experience.  You can buy with \r\nconfidence knowing that you're getting the best product available at any\r\n price point.  A note of caution however: the J Hook design is often \r\nimitated, and there are a number of lesser quality imitations on \r\nmarket.  Before purchasing, make sure you are getting an authentic AP \r\nRacing J Hook.\r\n\u003c\/p\u003e                \u003cdiv id=\"pspecs\" class=\"pdetail\"\u003e\n\u003ch3\u003eAdvantages Over OE Brake System\r\n\u003c\/h3\u003e\n\u003cp\u003eAP Racing by Essex 2-piece Spline Drive Competition Brake Discs offer the following advantages over OE discs:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\r\n\t\u003cli\u003eChampionship winning,\u003cstrong\u003e \u003c\/strong\u003e72\u003cstrong\u003e \u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e vane, fully-floating, AP Racing J Hook disc design\u003c\/li\u003e\r\n\t\u003cli\u003eDisc metallurgy specifically designed to handle the      temps typically seen on track and offer a long service life\u003c\/li\u003e\r\n\t\u003cli\u003eReplacement iron disc rings available at an extremely      competitive price\u003c\/li\u003e\r\n\t\u003cli\u003eAvailable disc burnishing service ensures that your kit      arrives ready to be installed and driven hard immediately\u003c\/li\u003e\r\n\u003c\/ul\u003e\n\u003ctable\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eModel Year\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e2015-2026\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e\u003cstrong\u003eEssex\/AP Spline Drive Rear\u003c\/strong\u003e\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e\u003cstrong\u003eOE Cayman GT4 \/ RS Clubsport Rear\u003c\/strong\u003e\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e\u003cstrong\u003eDisc\u003c\/strong\u003e\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eCP7177-214\/215GC\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e981.352.108.8A\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eType\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e2-piece floating\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e2-piece floating\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eWeight\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e16.6 lbs.\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e15.65 lbs.\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eDiameter\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e380mm\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e380mm\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eThickness\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e30mm\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e30mm\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eRadial Depth\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e47mm\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e47mm\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eNo. of Vanes\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e72\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e48\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\n\u003c\/div\u003e                \u003cdiv id=\"pbed\" class=\"pdetail\"\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eIf\r\n your brake discs aren’t being properly prepared for abuse prior to \r\nflogging them on track, you’re exposing yourself to potential judder, \r\nvibration, and cracking issues.  We all know that prepping your pads and\r\n discs at the track can be difficult.  Doing so wastes time during the \r\nfirst session of the day, and it's a hassle and potentially dangerous \r\nfor other drivers as you go through the procedure.  Track time is \r\nexpensive and tough to come by. The more time you spend behind the wheel\r\n performing an elaborate bed-in procedure, the less time you’ll spend \r\ndoing hot laps.  Performing the procedure on-track also limits its \r\nrepeatability.  You can't control what's going on around you with track \r\nconditions, other drivers, etc., and many track configurations don't \r\nreally lend themselves to the constant start\/stop\/start required to do the\r\n job properly.\r\n\u003c\/p\u003e\n\u003cp\u003eEssex is now offering a solution via our \r\nprofessional burnishing service.  Previously reserved for our \r\nprofessional racing customers, we are now offering our retail customers \r\nthe option of having the discs in select Competition Brake Kits \r\npre-burnished at our factory.  We burnish thousands of discs for the top\r\n racing teams each year.  After countless hours of experimentation, and \r\nextensive feedback from the top drivers and teams, we can consistently \r\nsqueeze the most reliable performance out of AP Racing's discs.  The \r\nprocedure is incredibly repeatable, as it is performed on a \r\ncomputer-controlled machine by experienced technicians.\r\n\t\u003cstrong\u003e\u003c\/strong\u003e  The cost of our burnishing service is $75 per disc ($150 per kit).\r\n\u003c\/p\u003e\n\u003cp\u003ePlease note that the \u003cem\u003epads\u003c\/em\u003e \r\nyou receive will not be pre-burnished.  In other words, the pads and \r\ndiscs do not have to be a matched set burnished together to reap the \r\nbenefits the procedure has on the discs.  In other words, we will \r\nburnish the discs in the pad compound you choose, they just won't be \r\nburnished with the exact set of pads that will arrive with your kit.\r\n\u003c\/p\u003e\n\u003cdiv class=\"video-container\"\u003e\r\n\t\u003ciframe src=\"https:\/\/www.essexparts.com\/\/www.youtube.com\/embed\/FG8Sg0jGKwQ\" allowfullscreen=\"\" frameborder=\"0\"\u003e\r\n\t\u003c\/iframe\u003e\r\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\r\n\u003c\/p\u003e\n\u003cp\u003eIf you'd rather have a go at preparing your discs yourself, please watch the video below:\r\n\u003c\/p\u003e\n\u003cdiv class=\"video-container\"\u003e\r\n\t\u003ciframe src=\"https:\/\/www.essexparts.com\/\/www.youtube.com\/embed\/pdPX6rzuINc\" allowfullscreen=\"\" frameborder=\"0\"\u003e\r\n\t\u003c\/iframe\u003e\r\n\u003c\/div\u003e\n\u003c\/div\u003e                \u003cdiv id=\"pwfi\" class=\"pdetail\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/2pcreplacementdiscmanual_38.pdf\" target=\"_blank\"\u003eDisc Installation Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eIron Ring and Aluminum Hat Assembly Instructions\u003c\/p\u003e\n\u003c\/div\u003e                \u003cdiv id=\"psa\" class=\"pdetail\"\u003e\n\u003ch3\u003eSpare Iron Brake Disc Rings\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.essexparts.com\/ap-racing-j-hook-competition-disc-replacment-ring-380x32mm-right-hand70537057\" target=\"_blank\"\u003eRight Hand Replacement Iron Disc Ring CP7177-214GC (Essex SKU: 13.05.10070)\u003c\/a\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.essexparts.com\/ap-racing-j-hook-competition-disc-replacment-ring-380x32mm-left-hand70557059\" target=\"_blank\"\u003eLeft Hand Replacement Iron Disc Ring CP7177-215GC (Essex SKU: 13.05.10071)\u003c\/a\u003e \u003c\/p\u003e\n\u003ch3\u003eDisc Attachment Hardware\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.essexparts.com\/10bolt-spline-drive-floating-hat-disc-hardware-kit\" target=\"_blank\"\u003eDisc attachment hardware kit (enough for one disc)\u003c\/a\u003e \u003c\/p\u003eIron Ring and Aluminum Hat Assembly Instructions\u003c\/div\u003e                \u003cdiv id=\"pfaq\" class=\"pdetail\"\u003e\n\u003ciframe src=\"https:\/\/www.essexparts.com\/\/www.youtube.com\/embed\/FG8Sg0jGKwQ\" allowfullscreen=\"\" frameborder=\"0\"\u003e\r\n\u003c\/iframe\u003e\u003ch2\u003eCompetition J Hook Disc FAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Where can I buy your discs?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA: \u003c\/strong\u003eEssex sells \r\ndirectly to both retail customers and through an extensive network of \r\nwholesale dealers\/resellers across North America.You can check our \r\nDealer Locator tool to find a local reseller.The other option is to \r\nplace an order directly on our website, or call us to place an order by \r\nphone.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do you have a brake pad that works well with these discs on both the street and the track?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No such pad \r\nexists.There will always be a compromise when running a pad in an \r\nenvironment for which it was not specifically designed.See the two \r\nquestions below for more details.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is it okay to run street pads on the racetrack?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No! Street pads \r\nare designed to chase groceries, not lap times.If you overheat a street \r\npad beyond its max operating temperature, you risk not only destroying \r\nthose pads, but your discs as well.Essex always recommends using street \r\npads on the street, and race\/track pads on the track.Please see \"\u003ca target=\"_blank\" href=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/how%20to%20choose%20the%20best%20street%20and%20track%20brake%20pads_3.pdf\"\u003eHow to Choose the Best Street and Track Brake Pads\u003c\/a\u003e\" for a more detailed explanation and guidance on pad choice.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is it okay to run race pads on the street?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Most race pads are\r\n designed to work optimally at high temperatures.As such, they many \r\ntimes don't have good cold bite, making them a poor choice for street \r\nuse.Even if they do have cold bite, they will likely make a lot of \r\nsquealing and screeching noises, produce heavy dust, and chew your discs\r\n up in a hurry when driven around cold.Please see \"\u003ca target=\"_blank\" href=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/how%20to%20choose%20the%20best%20street%20and%20track%20brake%20pads_3.pdf\"\u003eHow to Choose the Best Street and Track Brake Pads\u003c\/a\u003e\" for a more detailed explanation and guidance on pad choice.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I have to modify my car to install your discs?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e In almost all \r\ncases, no.If not otherwise noted, the discs will drop onto the car \r\nwithout any required modifications.On a few of our disc kits caliper \r\nspacers and longer caliper bolts are needed.For those applications, we \r\ninclude the spacers and bolts.Again though, unless otherwise noted, the \r\ndiscs will bolt onto the car without doing anything else.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will your discs significantly shorten my stopping distances with all else held equal? \u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA: \u003c\/strong\u003eNo! Tires stop \r\nyour car.Brakes turn the energy of the spinning brake discs into \r\nheat.The primary function of a properly designed big brake kit to \r\nwithstand the heat encountered during the repetitive and heavy use of \r\nthe brakes.Anyone who sells you a brake kit specifically to shorten your\r\n stopping distances is lying to you.If you want shorter stopping \r\ndistances, buy stickier tires.  If you want your brakes to feel exactly \r\nthe same on the last lap of the day as they did on the first lap, buy \r\nour brake discs.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: I saw that your discs reduce unsprung weight…will that help me?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes! Reducing \r\nunsprung weight not only improves braking performance, but also \r\ntranslates to superior acceleration and cornering as well.As is the case\r\n with switching to a lighter wheel and tire combo, installing lighter \r\nbrake components can improve your car's overall performance envelope.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are spare iron disc rings available and reasonably priced?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eA: \u003c\/strong\u003eBeing\r\n a company brimming with racers and track junkies, we're very aware of \r\nthe costs of running a typical track event schedule for the year...event\r\n fees, gas, hotels, tires, etc. It all adds up quickly. When we created \r\nour Competition Disc product line, availability and long-term running \r\ncosts were of paramount concern.We did a couple of things to address \r\nthese issues.First we're buying loads of spares and keeping them on the \r\nshelf in our warehouse in Charlotte, NC.Buying in bulk also brings the \r\ncost down, so we can pass them along at prices that may surprise you for\r\n a premium European brand.When you look at the specification of our \r\ndiscs vs. the competition, AP's racing heritage, and the longevity \r\nyou'll get from them, they are an incredible bargain.Most of the \r\ncompetitive discs on the market are 48 vanes or less, weigh more, have \r\nless optimized vane design, inferior metallurgy, and have never been \r\nproven under the same conditions as the AP Racing discs.Many of our race\r\n customers have run an entire season or more on a single set of discs.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Which side of the vehicle is left, and which is right?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e If you're sitting \r\nin the driver seat of a USDM vehicle, you are on the left side\/driver \r\nside.The other side is the passenger side\/right side.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Which disc is the left hand disc, and which is the right?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003eTo illustrate further:\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/2011_product_catalogue_page_060-551x523_2.jpg\"\u003e\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/left_right%20illustration_6.jpg\"\u003e\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I bed-in \/ burnish my new pads and discs?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA: \u003c\/strong\u003eWe have a detailed\r\n video that goes into the burnishing procedure in great depth.Please see\r\n our video \"How to Bed-in Brake Pads and Rotors.\"\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: I have a vibration or judder when I press the brake pedal. How do I get rid of it?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA: \u003c\/strong\u003eWhat you are \r\nexperiencing is most likely an uneven brake pad deposition on the disc \r\nface.What that means is brake pad material is stuck to the face of your \r\nbrake disc in splotches and patches.On a properly bedded\/burnished disc,\r\n that material is evenly distributed around the disc.If it is unevenly \r\nsmeared on the disc, high spots are created on the disc face.Every time \r\nyou press your brakes and the pads come in contact with that high spot, \r\nyou feel it as a judder through the brake pedal and\/or steering \r\nwheel.Our recommendation is to first try and remove those high spots by \r\ndriving an aggressive set of race pads cold.When you drive race pads \r\ncold, they scrape material from the disc, rather than depositing \r\nmaterial on the disc.In this manner you can \"clean\" your discs.To see \r\nthis process in action, check out our video \"Swapping Between Street and\r\n Race Brake Pads.\"\r\n\u003c\/p\u003e\n\u003cp\u003eTo help prevent uneven pad deposits in the future, never come to a\r\n complete stop and leave your foot on the brake pedal after heavy brake \r\nuse (coming off the track).Also, do not engage your parking brake under \r\nthose conditions\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why do my brake discs feel slimy, and how do I clean this oil off of my brake discs? \u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The oil is to keep\r\n the discs from rusting while they are sitting in a warehouse and in \r\ntransit.Washing them with soap and water will be sufficient to get them \r\nclean and prepped for install.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need to buy new discs, or machine my discs when I buy new pads?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No.As long as your\r\n discs are not below their designated minimum thickness, or cracked \r\nbeyond use, you can run them with your new pads.Machining the discs is \r\nnot required.That said, if you're switching to a different pad compound,\r\n it's usually a good idea to scrub your new discs first, to remove the \r\nold pad material from them.You can see details on this procedure in our \r\nvideo \"Swapping Between Street and Race Brake Pads.\"\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: My brakes squeal when I stop…what can I do?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA: \u003c\/strong\u003eOne of the most common causes of brake squeal is poorly bedded discs.Please see our video \"How to Bed-in Brake Pads and Rotors.\"\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: I live in (country outside of North America).Can you ship me your brake discs?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Due to contractual\r\n obligations with AP Racing, Essex only ships to physical addresses \r\ninside North America, or to a territory in which there isn't currently \r\nan authorized AP Racing distributor.To see if there is an authorized AP \r\ndistributor in your area, \u003ca href=\"http:\/\/www.apracing.com\/find.aspx?cid=9\"\u003eplease click here\u003c\/a\u003e.Your other option is to contact one of our current authorized dealers and see if they can help you.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do you offer discounts to \r\ninternet forum members, or to members of clubs and organizations such as\r\n NASA, SCCA, PCA, BMWCCA, etc.?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Due to the \r\nnarrowly targeted nature of our products, just about every customer of \r\nours is in some way involved with one of these organizations.If we \r\noffered this type of discount, we'd essentially be discounting to every \r\nsingle customer.That is not a policy that would allow us to stay in \r\nbusiness and keep bringing you the best brake products on the market for\r\n your car!\r\n\u003c\/p\u003e\n\u003cp\u003eAlso, since we sell to wholesale customers, we cannot undercut them on price.\u003cstrong\u003eAs such, all products we sell to retail customers are sold at the retail price listed on our website.\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do you offer sponsorships?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e AP Racing is \r\nfrequently recognized as the #1 brake supplier in professional racing \r\ntoday.Top teams from around the world in F1, Sprint Cup, ALMS, WRC, etc.\r\n pay a premium for AP Racing brakes because they are the best brake \r\nproducts available at any price.To receive any type of consideration for\r\n a sponsorship, you would have to provide an extraordinary amount of \r\nmedia coverage, and bring tangible benefits to the AP Racing and Essex \r\nbrands.\r\n\u003c\/p\u003e\n\u003cp\u003eFrom time-to-time we do have retail customers test new \r\nproducts.In those cases we would offer a small discount for providing \r\nfeedback on those products.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What about driving with your discs in foul weather conditions?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eA:\u003c\/strong\u003e\r\n We've had a few rally customers ask about foul-weather performance .Any\r\n aftermarket discs will require similar maintenance and present the same\r\n problems in foul weather conditions. The most vulnerable area for \r\nproblems is the attachment point between the iron disc and aluminum hat.\r\n That's why you don't see a whole lot of OEM two-piece discs using an \r\naluminum hat.Over the years many OEM's use a dual-cast iron design with \r\nas few moving parts as possible.  What happens is, that road salt and \r\nother gunk gets wedged between the hat and iron disc ring, and it is \r\nessentially impossible to remove short of taking the disc apart. The \r\nsalt eats away at the aluminum hat, eventually flaking, chipping, etc. \r\nAgain, this is a problem that will be encountered on ANY aftermarket \r\nbrake discs with an aluminum hat (FYI…the same sort of things happen \r\nwith the caliper brackets on just about ANY aftermarket BBK. They're \r\nalmost all anodized aluminum).\r\n\u003c\/p\u003e\n\u003cp\u003eOur recommendation is that if you are going to be driving the \r\ndiscs in inclement weather, we recommend disassembling and thoroughly \r\ncleaning them with soap and water on a regular schedule.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are your brake discs road legal?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eA:\u003c\/strong\u003e All of the brake products Essex sells\r\n are designed for off-road use only.If you read the fine print on any \r\naftermarket big brake kit, from any manufacturer, you'll find the same \r\nthing...for off-road use only.We don't design our brake discs to meet \r\nany government standards, as \u003ci\u003ethere is no such standard or requirement \u003c\/i\u003ein the USA for brake discs.There are however some regulations on brake hoses\/lines and brake fluid.\u003cstrong\u003eAll stainless steel brake hoses and brake fluid that Essex sells are DOT compliant.\u003c\/strong\u003ePlease read below and click the link for more details and info.\r\n\u003c\/p\u003e\n\u003cp\u003eThere are several federal organizations involved with the \r\nregulation of vehicle parts in the USA, but the two most relevant to the\r\n products we sell are the Department of Transportation (DOT) and the \r\nNational Highway and Transportation Safety Administration (NHTSA).\r\n\u003c\/p\u003e\n\u003cp\u003eNHTSA is the U.S. government agency responsible for implementing \r\nand enforcingthe National Traffic and Motor Vehicle Safety Act of 1966, \r\nas amended, 49 U.S.C. Chapter 301 (the Vehicle Safety Act),and certain \r\nother laws relating to motor vehicle safety. Under that authority, NHTSA\r\n issues and enforces federal motor vehicle safety standards (FMVSS) that\r\n establish minimum safety performance requirements for motor vehicles \r\nand for 13 items of motor vehicle equipment(i.e., “regulated motor \r\nvehicle parts”). \u003cstrong\u003eRegulated motor vehicle parts include\u003c\/strong\u003e tires, rims, \u003cstrong\u003ebrake hoses\u003c\/strong\u003e, \u003cstrong\u003ebrake fluid\u003c\/strong\u003e,\r\n seat belt assemblies, lighting equipment, glazing, motorcycle helmets, \r\nchild restraints, compressed natural gas containers, rear impact guards \r\nfor trailers, platform lift systems for the mobility-impaired, and \r\ntriangular reflective warning devices.\r\n\u003c\/p\u003e\n\u003cp\u003eTo be lawfully imported, a new or used regulated motor vehicle \r\npart must, as originally manufactured, conform to the version of the \r\napplicable FMVSS in effect on the date of manufacture and be so \r\ncertified by its manufacturer.In most instances, certification of \r\ncompliance with the applicable FMVSS for regulated motor vehicle parts \r\nis shown by the symbol “DOT” either inscribed on the part in a \r\nprescribed location, or placed on the outside of the container in which \r\nthe part is shipped.The full text of each FMVSS for motor vehicles and \r\nmotor vehicle equipment appears in49 CFR 571.Most of the standards \r\nlisted below are vehicle standards. Compliance with a vehicle standard \r\nis certified by the vehicle manufacturer and not by the manufacturer of \r\nthe vehicle system or component that is addressed by the standard. Some \r\nof the standards establish minimum safety performance requirements for \r\nmotor vehicle equipment. Those standards are marked in the list below \r\nwith an asterisk(*). The manufacturer of equipment that is subject to a \r\nstandard must certify the equipment’s compliance with the standard.\r\n\u003c\/p\u003e\n\u003cp\u003eYou can see full details here:\u003ca href=\"http:\/\/gsi.nist.gov\/global\/docs\/motor_vehicle_parts_guide.pdf\"\u003ehttp:\/\/gsi.nist.gov\/global\/docs\/motor_vehicle_part...\u003c\/a\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the manufacturer of my car deny a warranty claim because your brakes are on it?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003eThe information below is provided by SEMA, and can be found on \r\ntheir website (www.sema.org) under “Federal Warranty Laws.” You can also\r\n Google “The Magnuson-Moss Warranty Act (15 U.S.C. 2302(C).”\r\n\u003c\/p\u003e\n\u003cp\u003eThe Magnuson-Moss Warranty Act is a federal law that regulates \r\nwarranties to protect consumers.It essentially states that the use of an\r\n aftermarket part alone is not cause for denying the warranty. However, \r\nthe law's protection does not extend to aftermarket parts in situations \r\nwhere such parts actually caused the damage being claimed under the \r\nwarranty. Additionally, consumers are advised to be aware of any \r\nspecific terms or conditions stated in the warranty, which may result in\r\n its being voided. The law states in the relevant section:\r\n\u003c\/p\u003e\n\u003cp\u003e“No warrantor of a consumer product may condition his written or \r\nimplied warranty of such product on the consumers using, in connection \r\nwith such product, any article or service (other than article or service\r\n provided without charge under the terms of the warranty) which is \r\nidentified by brand, trade or corporate name....” (15 U.S.C. 2302(C)).\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do your brake discs come with a warranty?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA: \u003c\/strong\u003eNo.The disclaimer \r\nof warranty below appears on the first page of the install manual inside\r\n the box of every Essex Designed Competition Disc Kit.That said, if you \r\norder discs and there is something blatantly wrong when you open the box\r\n (the wrong size of disc is inside, etc.), we will do everything in our \r\npower to correct the situation immediately.We have stringent quality \r\ncontrols in place to prevent such a situation from occurring, and in all\r\n cases, multiple employees handle and check our products for issues \r\nbefore they go out the door.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimer of Warranty\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003eBy purchasing this product and opening this box, purchaser \r\nexpressly acknowledges, understands and agrees that they take, select \r\nand purchase this brake system, parts, and equipment from Essex Parts \r\nServices, Inc., its affiliates, suppliers, distributors, and agents \r\n(collectively, “Essex”) “as is” and “with all faults.” The entire risk \r\nas to the quality and performance of this brake system, parts, or \r\nequipment is with the purchaser. Should the goods prove defective \r\nfollowing their purchase, the purchaser assumes the entire cost for all \r\nnecessary servicing or repair or any resulting liability. Essex is not \r\nresponsible for any damage, consequential or otherwise, for equipment \r\nfailure or mal-performance after installation. Essex makes no warranties\r\n whatsoever, expressed or implied, oral or written, to purchasers or any\r\n users of these products. Essex expressly disclaims any implied warranty\r\n of merchantability or warranty of fitness for a particular purpose, \r\nincluding fitness of these systems, parts or equipment for racing or \r\nroad use. No warranty or representation is made to the product’s ability\r\n to protect the user from injury or death. The user assumes all risk.By \r\npurchasing this product and opening this box, purchaser expressly \r\naffirms that they are relying upon their own skill and judgment in \r\nselecting and purchasing these goods as suitable for purchasers’ \r\nintended use. Purchaser understands and agrees that no officer, \r\ndirector, salesman, distributor, or agent of Essex has any authority to \r\nmake any statement contrary to the terms of this disclaimer and \r\nagreement. On the contrary, Essex disavows any statement contrary to \r\nwhat is written above.\r\n\u003c\/p\u003e\n\u003c\/div\u003e                \u003cdiv id=\"previews\" class=\"pdetail\"\u003e\n                    \u003ca href=\"https:\/\/www.essexparts.com\/review\/5059\" target=\"_blank\" class=\"btn ilb\"\u003eLeave a Review\u003c\/a\u003e\n                    \u003cdiv class=\"clear\"\u003e \u003c\/div\u003e\n\n                    \n                                    \u003c\/div\u003e\n                \u003cdiv id=\"pga\" class=\"pdetail\"\u003e\u003cp\u003eSee these discs in action in \u003ca target=\"_blank\" href=\"https:\/\/www.essexparts.com\/media-center\/photo-gallery\"\u003eour Customer Gallery\u003c\/a\u003e.\u003c\/p\u003e\u003c\/div\u003e                        \u003c!-- end product details --\u003e\n    \u003c!-- end container --\u003e\n\u003c!-- end product additional --\u003e\n\n\u003cmeta name=\"_token\" content=\"QGk3ZpP0hy8TTFtpycrwYwlMY19SEGJjHnXw0LA7\"\u003e\n\n\n    \n        \u003c!-- \/End Main Layout --\u003e\n                    \u003cdiv id=\"footer\"\u003e\n    \u003cdiv class=\"container\"\u003e\n        \n        \u003cdiv class=\"contact\"\u003e\n            \u003cdiv class=\"cms-block\"\u003e\n\u003cp\u003e\r\n\t125 Hampton Court\r\n\t\u003cbr\u003e\r\n\tCramerton, NC 28032\r\n\t\u003cbr\u003e\r\n\t\u003cstrong\u003eP:\u003c\/strong\u003e\u003ca onclick=\"ga('send', 'event', { eventCategory: 'general', eventAction: 'click', eventLabel: 'call', eventValue: 1});\" href=\"tel:704-824-6030\" value=\"+17048246030\" target=\"_blank\"\u003e704.824.6030\u003c\/a\u003e\r\n\t\u003cbr\u003e\r\n\t\u003ca href=\"tel:704-824-7300\" value=\"+17048247300\" target=\"_blank\"\u003e\u003c\/a\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits: Porsche — Porsche 718 Cayman GT4 Clubsport; Porsche Cayman GT4 Clubsport; Porsche 718 Cayman GT4 RS Clubsport\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePart number: 13.01.20045.\u003c\/p\u003e\n\u003cp\u003eConfirm fitment for your application before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"AP Racing","offers":[{"title":"No Finishing","offer_id":53513376596250,"sku":"13.01.20045","price":2599.0,"currency_code":"USD","in_stock":true},{"title":"Disc Burnishing - Ferodo pad compound","offer_id":53513376858394,"sku":"13.01.20045-4044","price":2749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/981_clubsport_disc_attachment_close_1201.jpg?v=1794996023","url":"https:\/\/race-centric.com\/products\/ap-racing-by-essex-2-piece-spline-drive-competition-j-hook-disc-pair-rear-380x30mm-porsche-981-718-cayman-gt4-clubsport","provider":"Racecentric","version":"1.0","type":"link"}