{"product_id":"ap-racing-by-essex-radi-cal-enp-competition-brake-kit-rear-cp9450-380mm-porsche-992","title":"AP Racing Radi-CAL ENP Competition Brake Kit (Rear CP9450\/380mm)- Porsche 992","description":"\u003ch1\u003eWhat's In The Box?\u003cbr\u003e\n\u003c\/h1\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/cp9449_enp_caliper_kit_resized_1.jpg\" alt=\"cp9449_enp_caliper_kit_resized_1.jpg\"\u003e\u003c\/p\u003e\u003cul\u003e\r\n\t\u003cli\u003eOne pair AP Racing CP9450 Radi-CAL Pro5000R racing calipers in ENP (Electroless Nickel Plated) finish\u003c\/li\u003e\r\n\t\u003cli\u003eOne pair 380x32mm AP Racing CP5772, 72 vane, J Hook \r\nracing discs, with fully floating 6061 hard anodized aluminum hats and attachment \r\nhardware. Disc burnishing in Ferodo Racing pad compound included at no additional charge (normally $150 per disc pair). If you are using a brake pad brand other than Ferodo and are interested in compatible disc burnishing, please contact Essex support prior to purchase.\u003c\/li\u003e\r\n\t\u003cli\u003eOne pair caliper mounting brackets and hardware\u003c\/li\u003e\r\n\t\u003cli\u003eOne pair Spiegler Stainless Steel Brake Lines with abrasion resistant coating\u003c\/li\u003e\n\u003cli\u003eCaliper Bridge Pad Tension Clips (frequently referred to as anti-rattle clips)\u003c\/li\u003e\r\n\t\u003cli\u003eDetailed installation instructions\u003c\/li\u003e\r\n\t\u003cli\u003eBrake pads are \u003cstrong\u003eNOT\u003c\/strong\u003e included with our system. Racing\r\n brake pads are a highly personal choice. Many manufacturers include a \r\nset of inexpensive, low quality pads with their brake kits. Rather than \r\nartificially inflating the price of our system with a set of pads you \r\nprobably don't want anyway, we've decided to remove the cost from our \r\nsystem and allow our customers to choose the pads that best suit their \r\nneeds\/wants. When purchasing our kit, you are able to choose one set of front pads at a substantial discount vs. the retail price.  Please use the drop-down menu to select your pads.\u003c\/li\u003e\r\n\u003c\/ul\u003e\u003ch1\u003eCALIPERS\u003c\/h1\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/cp9449_enp_front_shot_low_resized_1.jpg\" alt=\"cp9449_enp_front_shot_low_resized_1.jpg\"\u003e\u003c\/p\u003e\u003ch1\u003eENP (ELECTROLESS NICKEL PLATED) FINISH\u003c\/h1\u003e\u003cp\u003eThe first obvious weakness when looking at a typical aftermarket caliper is the finish. Most aftermarket calipers come in a painted finish, whether they are red, black, or gold. That painted finish is designed to look pretty and prevent corrosion in harsh winter environment. Unfortunately, for all of the compliments painted calipers generate, there is an associated price if you drive the car in a track environment. That price is the chipping, flaking, fading, color shift, and general degradation of that finish in a fairly short period of time. Some OEM calipers can go from the as-delivered color to a nasty shade of brown in as little as one weekend. While this is typically worn as a badge of honor among our more hardcore customers, let’s face it…they still look terrible. More importantly however, all of those bits of paint end up in places they’re not supposed to, which we’ll get to in a minute.\u003c\/p\u003e\u003cp\u003eWhy does this happen? Heat. Paint and powder coat cannot adequately handle track temperatures. Powder coat also has some notorious issues with shrinkage. The powder coat layer expands and grows when the caliper is heated. When it cools, the powder coat doesn’t necessarily shrink in step with the caliper body itself. What’s left is a loose shell of finish hanging limply on the caliper body. That shell then cracks and falls to pieces.\u003c\/p\u003e\u003cp\u003ePaint can also have similar issues depending on how it is applied. If you were to line up a few aftermarket calipers from the same manufacturer, you would likely see that the painted finish on each of those calipers is slightly different. Some have a thicker coat, some thinner, slightly different shades of red, etc. Painting is to some extent an art form, and must be performed in a tightly controlled environment. If it isn’t, you’re always going to see variation. A thick coat makes the part look soft around the edges, and is prone to cracking off in the same manner as the powder coat described above, leaving the underlying finish exposed. A part without enough paint will look uneven, and will not protect the underlying aluminum particularly well either. In addition to problems with cracking, flaking, and uneven application, paint and powder coat also experience extreme color shift when heated. Red becomes maroon or black, gold becomes brown, and black just gets uglier.\u003c\/p\u003e\u003cp\u003eThe calipers we use in our AP Racing by Essex Radi-CAL Competition Kits don't have any of the above issues. In this kit, the calipers feature an Electroless Nickel Plated (ENP) finish. Because ENP is extremely hard and resistant to wear and corrosion, it is used in applications as diverse as the manufacture of hard disc drives and the targeting pods of the F-15 Eagle fighter jet. ENP is perfect for calipers that are frequently bled, and it won't chip and flake like a painted caliper if you bump it with your box wrench. It is the ideal finish for highly complex parts like the AP Radi-CAL, because it can be applied to the caliper's many curves and pockets in a very thin, uniform manner. ENP also has extremely low porosity, which is perfect for components exposed to harsh chemicals such a brake fluid. If you do get fluid, dirt, or debris on your calipers, ENP is incredibly easy to clean, and a quick wipe will bring it back to its former luster. Last but not least, ENP provides a jewel-like, liquid metal appearance to your brake system. The neutral, yet eye-catching finish meshes perfectly with just about any color scheme as it catches and reflects light.\u003c\/p\u003e\u003ch1\u003eRadi-CAL\u003c\/h1\u003e\u003cp\u003e“Radi-CAL”\r\n is a blanket term used to describe AP Racing’s patented asymmetrical \r\nbrake caliper design. Radi-Cal technology is grounded in Computer Aided \r\nDesign (CAD) and Finite Element Analysis (FEA), and allows for organic, \r\nalien-looking designs that are a radical departure from conventional \r\ncaliper designs of the past.  Radi-CAL's are widely considered the \r\npinnacle of current brake caliper technology.  Since their inception in \r\n2007, these revolutionary calipers have amassed a lengthy string of race\r\n victories at all levels of professional motorsport, while redefining \r\nbrake performance expectations.  For more details on the design concept \r\nand what these calipers have achieved in professional racing, \r\n\t\u003cstrong\u003eplease visit our blog and read \u003ca href=\"http:\/\/www.essexparts.com\/news-blog\/the-ap-racing-radical-story\" target=\"_blank\"\u003eThe AP Racing Radi-CAL Story\u003c\/a\u003e.\u003c\/strong\u003e\r\n\u003c\/p\u003e\u003cp\u003eThe key benefits of the Radi-CAL design:\r\n\u003c\/p\u003e\u003cul\u003e\r\n\t\u003cli\u003e\n\u003cstrong\u003eMassive Stiffness Increase\u003c\/strong\u003e-\r\n A 30+ % increase in both static and dynamic stiffness vs. conventional \r\ncalipers allows for far less deflection under load, which means superior\r\n pedal feel \u0026amp; modulation, more even pad wear, and longer caliper \r\nservice life.\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003e\n\u003cstrong\u003eConsiderable Mass Reduction\u003c\/strong\u003e- Removing all extraneous caliper mass lowers the caliper weight, despite the huge stiffness increases.\u003c\/li\u003e\r\n\t\u003cli\u003e\n\u003cstrong\u003eOptimized Airflow\u003c\/strong\u003e- Air moves around and through the caliper more efficiently, providing superior heat evacuation and cooling.\u003c\/li\u003e\r\n\t\u003cli\u003e\n\u003cstrong\u003eEfficient Packaging\u003c\/strong\u003e- The asymmetric caliper profile and internal fluid porting allows the caliper to fit into tighter spaces.\u003c\/li\u003e\r\n\u003c\/ul\u003e\u003ch1\u003e\u003cbr\u003e\u003c\/h1\u003e\u003ch2\u003eCP9450 Pro5000R, The Everyman Radi-CAL\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/cp9449_beauty_shot_angle_resized_1.jpg\" alt=\"cp9449_beauty_shot_angle_resized_1.jpg\"\u003e\u003c\/p\u003e\u003cp\u003eIt has taken  eight years, numerous generations of the design \r\nconcept, and  advancements in manufacturing techniques, but the Radi-CAL\r\n has finally  evolved into a viable solution for racers and enthusiasts \r\nof all levels  and budgets.  While many products are \t \r\n\t\u003cem\u003esupposedly\u003c\/em\u003e\r\n\tborn in  racing, there can be no doubt about the Pro5000R pedigree.  \r\nThese  calipers are direct descendants of the current crop of F1 and \r\nSprint Cup calipers.  They don't look ordinary, because they're \t \r\n\t\u003cem\u003enot\u003c\/em\u003e\r\n\tordinary.  They're the epitome of pure racing design: elegant,  sparse,\r\n  and brutally effective.  And while they embody and employ the Radi-CAL\r\n  design philosophy of the past, they also add some outstanding new  \r\nfeatures that enhance their practicality, convenience, and appeal.   \r\nQuite simply, they are the lightest, stiffest, and most technologically \r\n advanced brake calipers that have ever been within the average  \r\nenthusiast's grasp.\r\n\u003c\/p\u003e\u003cp\u003eThese intricate calipers have traditionally been machined from \r\nproprietary  aluminum alloy billets. As one can imagine, machining away \r\nall of that  material to achieve the final form is both time-consuming \r\nand costly. As a result, the price of these calipers has historically \r\nbeen prohibitive for the average club racer, time-trialer, or HPDE \r\nparticipant.  Fortunately, the Pro5000R calipers use a new drop-forging \r\ntechnique that has dramatically lowered the manufacturing cost and the \r\nresulting price of entry, bringing this incredible technology to the \r\nmasses.\r\n\u003c\/p\u003e\u003ch3\u003eRadi-CAL = Massive Dynamic Stiffness Increase\u003c\/h3\u003e\u003cp\u003eOver the  \r\nyears, many different strategies have been employed to shrink the brake \r\n caliper footprint while maintaining adequate stiffness: More robust  \r\ncaliper bridge designs, two-piece calipers with steel through-bolts,  \r\nexotic materials (i.e. Beryllium, MMC), forging rather than casting,  \r\nmonobloc design, etc.  All of these innovations pushed calipers towards \r\n becoming lighter, smaller, and stiffer. However, until the advent of \r\nthe Radi-CAL, the same basic rectangular, boxy shape remained the \r\naccepted  standard.\r\n\u003c\/p\u003e\u003cp\u003eIs a rectangular box really the most appropriate and efficient  \r\nshape for a brake caliper however?  AP Racing has now proven that it is \r\n not.  As a brake caliper clamps brake pads against a spinning disc, a  \r\ntremendous tangential friction force occurs between the pads and the  \r\nspinning disc.  In other words, the caliper is pulled strongly in the  \r\ndirection of the spinning disc, as represented by the downward pointing \r\n arrow on the right side in Figure 1 below.  The caliper resists that  \r\nforce via the spindle hard mounting points, depicted by the upward arrow\r\n on the left.  The dynamic load placed on the caliper twists or pulls  \r\nthe caliper into a parallelogram shape.\r\n\u003c\/p\u003e\u003cp\u003eFigure 1\u003cbr\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg alt=\"\" src=\"http:\/\/www.essexparts.com\/storage\/wysiwyg\/Caliper%20Parallelogram%20Force.jpg\"\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/www.essexparts.com\/storage\/wysiwyg\/parallelogram.jpg\"\u003e\r\n\u003c\/p\u003e\u003cp\u003eThe dynamic force exerted on the calipers during a braking event \r\n is the key to the magic of the Radi-CAL design philosophy.  Brake  \r\ncalipers of the past were designed to some extent in relative isolation \r\n from the forces that they were attempting to combat.  They were \r\ndesigned to be the stiffest box possible while resting on a table, with \r\nmuch of  the caliper mass residing at either end.  \r\n\t\u003cstrong\u003eThe\r\n Radi-CAL is dramatically different because it was deliberately designed\r\n around the braking event forces that will be acting upon it.\r\n\t\u003c\/strong\u003e  \r\nThis is achieved by optimally distributing the body mass of the caliper \r\n on a diagonal, rather than at the two caliper ends.  As such, the \r\nforces dynamically acting on the caliper are supported by the caliper \r\nmass,  rather than what historically has been an empty box (see Figure 2\r\n  below).  At the same time, this also allows for a significant \r\nreduction  in overall mass, because all non-essential, non-load-bearing \r\ncaliper  body material is removed.  So in the case of the Radi-CAL, \r\n\t\u003cstrong\u003eit's not just about the material that is put into the caliper, it's about the material that is taken away!\u003c\/strong\u003e\r\n\u003c\/p\u003eFigure 2\u003cp\u003e\u003cimg alt=\"\" src=\"http:\/\/www.essexparts.com\/storage\/wysiwyg\/Diagnoal%20Load%20Paths%20Conventional.jpg\"\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/www.essexparts.com\/storage\/wysiwyg\/Diagonal%20Load%202.jpg\"\u003e\r\n\u003c\/p\u003e\u003ch4\u003eWhat does the above mean for you, the driver?  It means a  \r\nsignificantly firmer brake pedal with superior modulation under all  \r\nconditions.  It also means more even pad wear with less tapering, and a \r\n longer caliper service life.\r\n\u003c\/h4\u003e\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\u003ch2\u003eTwo-piece, Drop-Forged Caliper Body\u003c\/h2\u003e\u003cp\u003eRadi-CAL's such as the one in the pic above have traditionally been machined from a single, solid block of proprietary aluminum alloy (monobloc). With a monobloc design, the piston bores and piston seal grooves can only be machined with a right angle machine tool (the tool must be inserted up and into the caliper). As one can imagine, machining away all of that material with special tools and multiple setups to achieve the final form is both time-consuming and costly. As a result, the price of monobloc Radi-CAL's has historically been prohibitive for the average club racer, time-trialer, or HPDE participant. The Pro5000R has been made possible by a newly developed 2-piece drop-forging process, which allows a conventional machine tool to access the piston bores via a direct path. The result is a drastic reduction in both production time and cost, while still retaining an incredibly stiff form.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/cp9449_enp_top_resized_1.jpg\" alt=\"cp9449_enp_top_resized_1.jpg\"\u003e\u003c\/p\u003e\u003ch3\u003eRadi-CAL= Ultra-lightweight, Compact Design with High Airflow\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/cp9449_rear_shot_low_resized_1.jpg\" alt=\"cp9449_rear_shot_low_resized_1.jpg\"\u003e\u003c\/p\u003e\u003cp\u003eAs mentioned above, the Radi-CAL design philosophy is just as much about what \u003cem\u003eisn't\u003c\/em\u003e\r\n\tthere, as it is about what is there.  The Radi-CAL design relocates  \r\ncaliper mass, creating  voids that would traditionally not be located  \r\nwhere they are.  As such, considerable mass is removed from the body,  \r\nand the entire envelope of the caliper is optimized.  The result is an  \r\nextraordinarily lightweight and compact footprint.  \t \r\n\t\u003cstrong\u003eWhereas many  competing four piston calipers weigh in the 6-7 lb. range, the CP9450 weighs an astounding 4.85 lbs.!\t \u003c\/strong\u003e\u003cbr\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/cp9449_enp_bottom_resized_1.jpg\" alt=\"cp9449_enp_bottom_resized_1.jpg\"\u003e\u003c\/p\u003e\u003cp\u003eThe Essex mantra when designing brake kits has always been, \r\n\"Anything larger than  necessary to get the job done is simply dead \r\nweight to drag around,\" and the Radi-CAL aligns perfectly with those \r\nvalues.   One of the major problems with many of the brake packages \r\ncurrently on the  market is wheel fitment.  You’re offered gigantic \r\ndiscs and 12 piston  calipers, with a pat on the back and a, “Good luck \r\nfinding wheels to  clear those things (insert sinister chuckle here).”  \r\nThe reality is that many casual racers want to use their OEM wheels on \r\nthe track, or  the smallest, lightest wheel they can find.  Not only is \r\nsaving unsprung weight critical, R compound tires are much more \r\nplentiful and cheaper  for smaller wheels.  If the components are \r\ndesigned properly with heavy  use in mind, you don’t need to cram boat \r\nanchors under your wheels.  If you’re  worried about the loss of \r\nstiffness due to mass reduction, don’t.  Some  manufacturers use a \r\nheavier four piston caliper, but that's because the  caliper wasn't \r\ndesigned or optimized for racing.  In those cases, the  same caliper may\r\n have been designed for use on much heavier road cars,  and even trucks!\r\n  AP Racing’s Pro5000R calipers are incredibly stiff, and designed from \r\n scratch with only the racetrack in mind.\r\n\u003c\/p\u003e\u003cp\u003eTake a look at the caliper above or below.  Anything else  \r\nmissing?  Outer bleed screws and crossover tubes!  The Pro5000R range  \r\nhas internal fluid porting and only two bleed screws located on the  \r\ninner caliper half.  That means that the chance of knocking a bleed  \r\nscrew or denting a crossover pipe during a wheel change virtually  \r\ndisappears.  It also means that you now have half as many bleed screws  \r\nto turn when changing your brake fluid.  Eliminating the piping and  \r\nbleed screws also allows the outer corners to be rounded, improving  \r\nwheel spoke clearance.\r\n\u003c\/p\u003e\u003cp\u003eFinally, take a look at area around the pistons in the picture  \r\nbelow.  Compared to a traditional caliper, far more surface area around \r\n the pistons is in contact with the cooling air surrounding caliper.  As\r\n a result, the calipers have more airflow through and around them,  \r\nlowering their overall operating temperatures.\r\n\u003c\/p\u003e\u003ch3\u003eSimple One-Bolt Pad Change - No Caliper or Brake Line Removal!\u003c\/h3\u003e\u003cp\u003eThe OEM Porsche calipers have a fixed bridge and they are \r\nattached to a hard brake line.  To change pads, the caliper must be \r\nremoved.  If you don't want to break the hard line connection, the brake line bracket must also be removed and the caliper must be hung on the suspension, etc.  Changing pads \r\nwill no longer be a chore with the Pro5000R's, and it will require far fewer tools.  AP’s bridge bolts pop out easily with a 6mm \r\nhex wrench.  It will take you considerably longer to raise the car and remove the wheels than it will to change pads.\r\n\u003c\/p\u003eOEM Porsche caliper vs. AP Racing CP9450 (anodized gray caliper finish shown below)\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/992_turbo_s_rear_caliper_comparison_top_resized_for_web_2.jpg\"\u003e\r\n\u003c\/p\u003e\u003cp\u003eAP's 9450 caliper bridge is designed so that pads can be removed simply, with only one hex head bolt!\u003cbr\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/cp9449_top_front_angle_resized_1.jpg\" alt=\"cp9449_top_front_angle_resized_1.jpg\"\u003e\u003c\/p\u003e\u003ch3\u003eBrake Pads in A Commonly Available Shape\u003cem\u003e\u003c\/em\u003e\n\u003c\/h3\u003e\u003cp\u003eThe\r\n basic pad shape for the CP94XX caliper was created by AP Racing \r\nmany years ago, and is used by a wide range of racing calipers today.  \r\nThey're available in just about every popular racing compound on the \r\nmarket.  That means you’ll never end up in a pinch without pads.\r\n\u003c\/p\u003e\u003cp\u003eBelow is a drawing of the basic pad shape:\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/frp3018.jpg\"\u003e\u003cspan class=\"redactor-invisible-space\"\u003e\u003cstrong\u003e\u003c\/strong\u003eDimensions= 132.4 x 50 x 16.7 mm\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\r\n\u003c\/p\u003e\u003cp\u003eThe pad shapes that will fit the CP94XX caliper can be \r\nfound below.  For the brands we sell, we have provided hyperlinks in the\r\n chart below to each of their compound offerings.  Many other manufacturers sell this same basic pad shape.\r\n  However, they are frequently offered in a variety of radial depths \r\n(heights) and thicknesses.\r\n\t\u003cstrong\u003e For Essex GT3 and GT4 rear applications, the pad must have a 16.75-17.0mm thickness and a D50mm radial depth.  \u003c\/strong\u003eEssex\r\n cannot guarantee fitment for the brands we don't sell.  We're merely \r\noffering these suggestions based on our research, and believe they are \r\nthe appropriate part numbers. Prior to purchasing any of them, you \r\nshould verify fitment with either the pad \r\nmanufacturer or your installer\/technician.\r\n\u003c\/p\u003e\u003ctable\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e\u003cstrong\u003eShape Number\u003c\/strong\u003e\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e\u003cstrong\u003eCompounds: Click Each Below to   View and Purchase\u003c\/strong\u003e\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eAlcon\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eAP Racing\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eCP3215D50\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eBrembo\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003eB52\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eCarbotech\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e\u003cbr\u003e\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eCirco\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eCL Brakes\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e5004W50T17\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eCobalt\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eEBC\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eEndless\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eFerodo\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eFRP216\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e\u003ca href=\"https:\/\/www.essexparts.com\/ferodo-ds2500-brake-pads770\" target=\"_blank\"\u003eDS2500\u003c\/a\u003e, \u003ca href=\"https:\/\/www.essexparts.com\/ferodo-ds1-11-brake-pads773\" target=\"_blank\"\u003eDS1.11\u003c\/a\u003e, \u003ca href=\"https:\/\/www.essexparts.com\/ferodo-frp216g-ds312-brake-pads\" target=\"_blank\"\u003eDS3.12\u003c\/a\u003e\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eHawk\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eHB110.654\u003cbr\u003e\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eMintex\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e\u003cbr\u003e\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e\u003cbr\u003e\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003ePagid\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e1361\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003ePFC\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e7767\u003cbr\u003e\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003ePorterfield\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eProject Mu\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003eF1067\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eRaybestos\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eWilwood\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\u003ch3\u003eVentilated, Domed Back, Stainless Steel Pistons \u003c\/h3\u003e\u003cp\u003eStainless\r\n steel pistons offer the insulation of ceramic caps, without the \r\nfragility of ceramic.  They help prevent fluid fade on the track, and \r\nthey won't crack or break!  This has been proven over and over again \r\nat all levels of motorsport.  While most aftermarket calipers use a \r\npressed aluminum piston, the Pro5000R's use an expensive machined \r\nstainless steel piston.\r\n\t\u003cbr\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/cp9449_enp_caliper_piston_detail_resized.jpg\" alt=\"cp9449_enp_caliper_piston_detail_resized.jpg\"\u003e\u003c\/p\u003e\u003cp\u003eTo add stiffness to the pistons, AP \r\ndesigned the back of the piston with a domed back.  At first glance this\r\n seems like a trivial design element.  It is not.  When domed back \r\npistons were introduced in professional racing, driver feedback was \r\nimmediate and resoundingly positive.  The domed back adds considerable \r\nstiffness that can be felt through the pedal, and they have now become \r\nthe standard vs. which all designs are judged.\u003c\/p\u003e\u003cp\u003eFor even greater heat resistance, there is \r\nventilation on each piston.  The air gaps around the piston\r\n edge allow for even more cooling air circulation around the pistons.  \r\nAll of these features slow and repel the influx of heat into the brake \r\nfluid, preventing brake fluid boiling and fade.\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/www.essexparts.com\/storage\/wysiwyg\/CP5060%287%29.jpg\"\u003e\r\n\u003c\/p\u003e\u003ch3\u003eAnti-knockback Springs\u003c\/h3\u003e\u003cp\u003eNot only are the  pistons \r\nstainless steel, they are fitted with anti-knockback springs.   Springs \r\nin pistons you ask?  Yes, springs.  If you’ve ever gone through a series\r\n of S turns and then had your pedal drop when going into the  following \r\nbrake zone, you have experienced knockback.  To say it is  disconcerting\r\n is an understatement.  You’ll often see pro drivers  ‘pre-tap’ their \r\nbrakes lightly when approaching a brake zone.  They are  fighting \r\nknockback.\r\n\u003c\/p\u003e\u003cp\u003eKnockback is a phenomenon that is common  with fixed calipers.  \r\nKnockback occurs when your car’s wheel, hub, and  bearings deflect \r\nduring cornering, allowing your brake disc to move out  of sync with \r\nyour caliper and brake pads.  The amount of knockback  varies by \r\nvehicle, and depends on the amount of deflection seen in the  parts \r\nlisted above.  As the brake disc deflects, it actually pushes the  pads \r\naway from each other, forcing the caliper pistons back into their  \r\nbores.  The piston seals don’t have enough tension in them to completely\r\n return the pistons to their original location.  That means there is \r\nslack in the system that needs to be taken up.  When you press the brake\r\n pedal, it will continue to drop until that slack is taken up.\r\n\u003c\/p\u003e\u003cp\u003eAnti-knockback springs help alleviate this situation by putting \r\nsome tension on the  back side of the pistons.  When the disc deflects \r\nand makes contact with the pistons, the springs push the pistons back \r\ninto their proper  location, reducing slack in the system.  That means \r\nless pedal drop and  far fewer pucker-factor moments when going into \r\nheavy brake zones.\r\n\u003c\/p\u003e\u003cp\u003eThere are no major downsides to lightweight AKB spring as long as\r\n the caliper is designed to accommodate them.  More specifically, AKB \r\nsprings do not create any increased drag or wear on the pads and discs \r\nas long as the  shape and material of the piston seals takes them into \r\naccount.\r\n\u003c\/p\u003e\u003cp\u003eAs you're driving the suspension is constantly compressing, the \r\ndisc is  moving around laterally, and the pads are being pushed slightly\r\n away  from the disc. Think of the seals in the caliper as a spring or \r\nhinge  attached to the side of the piston, rather than just a ring \r\nthrough  which the piston slides. In an AP Racing competition caliper, \r\nthe groove in which the seal resides isn't a square cut groove.It has \r\nangles. When the pistons slide in or out there is friction between the \r\nouter piston  wall and the seal, and the seal distorts a bit as shown in\r\n the  illustration below.\r\n\u003c\/p\u003eA caliper piston sliding out to the left would\u003cp\u003edistort the seal in this manner (the slashes are the seals on either\r\n\u003c\/p\u003e\u003cp\u003eside of the piston):\r\n\u003c\/p\u003e\u003cp\u003e \/\u003cbr\u003e ---\u003cbr\u003e ---\u003cbr\u003e \\\u003cbr\u003e\u003cbr\u003e As the piston slides back in to the right, the seal does this:\u003cbr\u003e \\\u003cbr\u003e ---\u003cbr\u003e ---\u003cbr\u003e \/\u003cbr\u003e\u003cbr\u003e\r\n\tThere is a certain amount of tension or friction that needs to be  \r\novercome before the piston actually starts moving through the seal ring.\r\n That tension\/friction keeps the piston from dragging on the disc once \r\nthe pistons are pushed back into the bores by the disc\/suspension  \r\nmovement.\r\n\t\u003cbr\u003e\u003cbr\u003e When AKB springs are added, a little more force is \r\nrequired to push the pistons back into their bores than would be  \r\nrequired without them.After the spring is compressed, it unloads and  \r\npushes the piston back to 'neutral.'\r\n\t\u003cbr\u003e\u003cbr\u003e With the proper seal and  \r\nspring the goal is to keep the piston in the 'neutral' position, not  \r\npressed against the disc.The piston is still able to slide freely in  \r\neither direction, but a bit of friction or tension needs to be overcome \r\n initially to get it moving in either direction. The seal offers that  \r\nfirst bit of friction to limit movement, and then the spring provides  \r\nadditional resistance. The end result is that the properly designed AP  \r\nRacing calipers won't drag or create additional or unnecessary wear.\r\n\u003c\/p\u003e\u003ch3\u003e\u003cimg src=\"http:\/\/www.essexparts.com\/storage\/wysiwyg\/CP5060%283%29.jpg\"\u003e\u003c\/h3\u003e\u003ch3\u003eHigh Temperature, Low Drag Seals Without Dust Boots \u003c\/h3\u003e\u003cp\u003eWe\r\n are often asked by potential customers if the calipers in our kits \r\nrequire frequent maintenance and rebuilding because the pistons don't \r\nhave dust boots.  We are perpetually shocked by this question because it\r\n makes no intuitive sense.  If you have a product that is specifically \r\ndesigned to handle the extraordinary high-heat conditions of track use, \r\nwhy would it require more maintenance when used under those conditions \r\nvs. brake components that were designed to cruise around on the streets \r\nat low speed and temperature?\r\n\u003c\/p\u003e\u003cp\u003eMany people confuse piston seals with dust boots. All calipers \r\nhave seals. They're the little rubbery rings inside the piston bores \r\n(see pic below). If a caliper didn't have a seal, your brake fluid would\r\n leak out around the pistons! OEM caliper seals aren’t designed to \r\nhandle constant trips to several hundred degrees without becoming \r\nbrittle and leaking. Our calipers use special high-temp seals designed \r\nfor track use. They are the exact same high temperature seals used in \r\nNASCAR Sprint Cup, ALMS, DTM, etc. That means they are less likely to \r\nget brittle and wear out when used under high-heat track conditions, and\r\n they require far LESS frequent replacement and servicing.\r\n\u003c\/p\u003e\u003cp\u003eMost aftermarket calipers are designed for year round road use, \r\nand as such come with a bellows style external dust boot like the ones \r\nshown below.  The rubber boot stretches as the piston extends, and its \r\nobjective is  to keep contaminants out of the piston bore.  It's a nice \r\nconcept, but  we've seen customers burn those up in a single 20 minute \r\ntrack session!  Once that happens, you're simply driving around with \r\nsome tattered,  burnt rubber bits attached to your pistons.  At that \r\npoint they're providing  zero benefits to you.  If you're going to  \r\ninstantly destroy them when you go to the  track, why worry about having\r\n them in the first place?   We skip making that mess for you by \r\neliminating them from our design.\r\n\u003c\/p\u003e\u003cp\u003e\u003cem\u003eAP Racing High-Temp Piston Seal\u003c\/em\u003e\u003cbr\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/www.essexparts.com\/storage\/wysiwyg\/CP8350_high_temp_seal_installed.jpg\"\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cem\u003eOEM Dust Boot Before Track Use\u003c\/em\u003e\u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/www.essexparts.com\/storage\/wysiwyg\/Piston_with_dust_boot_mod.jpg\"\u003e\r\n\u003c\/p\u003e\u003cem\u003eTypical OEM Dust Boot After Track Use\u003c\/em\u003e\u003cp\u003e\u003cimg src=\"http:\/\/www.essexparts.com\/storage\/wysiwyg\/Brembo_dust_boot_seal_large.jpg\"\u003e\u003c\/p\u003e\u003ch3\u003ePistons Sized Specifically for Your Car\u003c\/h3\u003e\u003cp\u003eThe\r\n piston sizes in our systems are specifically chosen to closely mimic \r\nthe OEM brake torque on a given axle.  As such, our front systems can be\r\n bolted to otherwise stock cars with no ill-effects, negative impact on \r\nABS, etc.  The vehicles \r\nstock master cylinder can remain, as can the OEM rear brake system.\r\n\u003c\/p\u003e\u003ch3\u003e\u003c\/h3\u003e\u003ch3\u003e\u003c\/h3\u003e\u003ch3\u003ePad Tension Kit Included at No Extra Cost\u003c\/h3\u003e\u003cp\u003eIn an attempt to \r\nprovide every available option in our premier Radi-CAL Brake Kits, we \r\ninclude our pad tension blocks at no additional charge.  Essex Designed \r\nPad Tension Blocks are precision machined from billet \r\naluminum, hard anodized, and topped with a heat-treated stainless steel \r\nspring.  These blocks install in place of the original pad retention \r\nblocks in AP Racing's CP9661 caliper.  They place a small \r\namount of tension on the top of the pad, substantially decreasing its \r\nmovement inside the caliper.\r\n\t\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\r\n\u003c\/p\u003e\u003ch4\u003eWhen installed, the spring clip on top should sit closest to the outside of the caliper, as seen in the pic below (*anodized caliper finish shown).\u003c\/h4\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/944x_tension_blocks_installed_2.jpg\"\u003e\u003c\/p\u003e\u003ch3\u003e\u003c\/h3\u003e\u003ch3\u003eLifetime Professional Reconditioning Service \u003c\/h3\u003e\u003cp\u003e\u003cu\u003e\u003cimg src=\"http:\/\/www.essexparts.com\/storage\/wysiwyg\/Caliper_Recertification_024_WEB.jpg\"\u003e\u003c\/u\u003eEssex\r\n is AP Racing's official North American caliper reconditioning center.  \r\nWe have skilled service technicians rebuilding hundreds of AP Racing  \r\ncalipers each year for the top teams in NASCAR Sprint Cup, ALMS, etc.   \r\nAs an Essex customer, our rebuild service will always be available to  \r\nyou when your calipers need servicing.  You simply remove your calipers \r\n from the car, drain\/clean them, and ship them back to Essex.  We take \r\nit from there:\r\n\u003c\/p\u003e\u003cp\u003e\u003cu\u003eHardness testing:\u003c\/u\u003e\tAfter disassembly \r\nyour calipers will be Rockwell hardness tested  against the standard for\r\n that particular caliper type as sold new. This  test provides a \r\nrelative understanding of how much fatigue and stiffness loss your \r\ncalipers have experienced. Tired calipers lead to pad  tapering, \r\nincreased pad wear, leaky seals, and a loss of pedal firmness, all \r\nthings you want to avoid. Essex will make a replace or rebuild  \r\nrecommendation based on the results of this test.\r\n\u003c\/p\u003e\u003cp\u003e\u003cu\u003eUltrasonic cleaning:\u003c\/u\u003e\tAfter passing \r\nthe hardness test, your calipers will be placed in an  ultrasonic \r\ncleaner to remove all dirt, debris, brake fluid, etc.  This  method \r\nproduces results that are far superior to what the average racer  could \r\naccomplish via hand-cleaning.\r\n\u003c\/p\u003e\u003cp\u003e\u003cu\u003eInspection and re-assembly:\u003c\/u\u003e\tAll \r\nserviceable parts of the caliper will be inspected and replaced if  \r\nnecessary, including the seals, abutment plates, pistons, and bleed  \r\nscrews.\r\n\u003c\/p\u003e\u003cp\u003e\u003cu\u003eCyclical Pressure Testing:\u003c\/u\u003e\tAfter \r\nyour calipers have been rebuilt, they will be cycled at high and  low \r\npressure on a pressure bench to ensure proper functioning. This is  \r\nimportant, as certain leaks only show up under specific pressure  \r\nconditions.\r\n\u003c\/p\u003e\u003cp\u003e\u003cu\u003ePrice:\u003c\/u\u003e\tThe labor price to rebuild a \r\nPro5000R is roughly $80 per caliper.  That does not  include parts.  \r\nAssuming there has been no damage to the caliper, Essex typically \r\nrecommends replacing the seals ($60) and bleed screws ($15)  during the \r\nstandard reconditioning process.  For roughly $160, you can  have a \r\nfresh, professionally serviced caliper in peak operating  condition.  \r\nYou won't get messy, and you'll know the rebuild was done by the same \r\nfolks trusted by elite-level race teams.\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/www.essexparts.com\/storage\/wysiwyg\/caliper_recertification_006_web_3.jpg\"\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/www.essexparts.com\/storage\/wysiwyg\/caliper_recertification_029_web_4.jpg\"\u003e\r\n\u003c\/p\u003e\u003ch1\u003e\n\u003cstrong\u003eDiscs- \u003c\/strong\u003e\u003cstrong\u003eAP Racing Competition J Hook \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h1\u003e\u003ch3\u003eIron vs. Carbon Ceramic Brake Discs\u003c\/h3\u003e\u003cp\u003eIn the past few years, \r\nCarbon Ceramic brake discs have become increasingly popular on high-end \r\nsports cars as either standard equipment or as a factory installed \r\noption.  Although expensive, they're a great choice for a car that is \r\nused exclusively on the street.  They save a large amount of unsprung \r\nweight, they don't generate much brake dust, have low NVH, and they may \r\neven last longer than the rest of the car!  For the avid track \r\nenthusiast however, they're typically \r\n\t\u003cem\u003enot\u003c\/em\u003e the best choice.\r\n\u003c\/p\u003e\u003cp\u003eOn\r\n the racetrack, repetitive stops from high speeds generate \r\nconsiderably higher brake disc temperatures vs. what could ever be \r\nlegally or sanely achieved on the street.  Various manufacturers \r\nproducing the current crop of carbon ceramic discs claim to match iron \r\ndisc durability on the track, but our experience tells us otherwise.  \r\nWhile they may be less resistant to warping or deformation at repeated \r\nelevated temperatures, \r\n\t\u003cstrong\u003ethe biggest \r\nproblem with carbon ceramic discs is that they tend to oxidize at track \r\ntemperatures, showing rough surface eruptions on the disc face.\r\n\t\u003c\/strong\u003e\r\n\tIn some cases the oxidation is terminal (chopped fiber discs), and the\r\n discs must be scrapped once it occurs.  In other cases (continuous \r\nfiber discs), the discs can be resurfaced, but only a limited number of \r\ntimes and at a high cost.  Most carbon ceramic discs are measured in \r\nterms of minimum mass, rather than the traditional minimum thickness \r\nused to measure iron discs.  Once the minimum mass is reached, the \r\ncarbon ceramic disc is trash.\r\n\u003c\/p\u003e\u003cp\u003eBelow is an oxidized carbon \r\nceramic disc.  Notice the dark spots in which the surface is flaking off\r\n \/ eroding.  When your disc looks like this, it has become a $2,000 \r\npaperweight!\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/C7Z06%20CCM%20after%2010%20days%20track%20sample.jpg\"\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOther Potential Pitfalls with Carbon Ceramic Discs:\u003c\/strong\u003e\r\n\u003c\/p\u003e\u003cul\u003e\r\n\t\u003cli\u003e\n\u003cstrong\u003eLow airflow-\u003c\/strong\u003e\r\n\tIf you look at a specific car model that offers both      iron and \r\ncarbon ceramic discs as an option, the carbon ceramic discs will      \r\nalmost always be considerably larger in overall dimension, with a \r\nspecific      emphasis on a tall radial depth (distance from outer disc \r\nedge to inner      disc edge).  Whereas an iron disc uses a web of \r\ndirectional internal vanes to speed      airflow through the disc, most \r\ncarbon ceramic discs rely primarily on their large      surface area to radiate \r\nheat into the air surrounding the disc.       Hence, the tall radial \r\ndepth.\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003e\n\u003cstrong\u003eExpensive and limited range of compatible brake pads-\u003c\/strong\u003e\r\n\tThere aren't many brake pad options with carbon      ceramic discs.  \r\nThe pads must be compatible with the specific disc      material being \r\nused, and if they aren't, they can destroy the discs in a      hurry.  \r\nSince brake pads are a very personal choice to most track      junkies, \r\ncarbon ceramic discs don't provide many options for the driver to      \r\nchase a desired feel.  Also as noted above, carbon ceramic discs tend   \r\n   to be very tall radially, which means very large brake pads are      \r\nrequired.  In the world of brake pads, price is usually directly      \r\nproportional to size:  Bigger = more expensive.\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003e\n\u003cstrong\u003ePoor feel-\u003c\/strong\u003e\r\n\tExperienced drivers will tell you that cast iron discs provide \r\nsuperior      pedal feel due to less compress-ability.  Some drivers \r\nfind that      carbon ceramic discs feel soft or abrasive at lower \r\ntemperatures, but feel      like stone with little modulation once they \r\nheat up.  Feel and the      resulting confidence is rather important \r\nwhen hurtling towards a guardrail      at 150mph!\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eHigh replacement disc cost-\u003c\/strong\u003e\r\n\tCarbon ceramic replacement discs can be hideously      expensive.  If \r\nyou do wear out or damage a disc, it can cost thousands      of dollars \r\nto replace each one.  When running carbon ceramic discs      hard on a \r\nracetrack, the odds of having to replace one or more of them      \r\nincreases exponentially vs. if you only drive your car on the street.\r\n\t\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\r\n\t\u003cli\u003e\n\u003cstrong\u003eDamage-prone-\u003c\/strong\u003e\r\n\tMany manufactures suggest covering their carbon ceramic discs when\r\n      handling them, so they are not chipped or fractured.  One knock \r\nwhen      changing a wheel can destroy a disc.  Additionally, some \r\nchemical      wheel cleaners or abrasives used in car detailing can \r\ndamage carbon      ceramic discs.\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003e\n\u003cstrong\u003eSplinters-\u003c\/strong\u003e      Carbon ceramic discs shouldn't be handled with bare hands, as they can      leave carbon splinters in the skin.\u003c\/li\u003e\r\n\t\u003cli\u003e\n\u003cstrong\u003eGreater sensitivity to burnishing\/bedding-in-\u003c\/strong\u003e\r\n\tMost manufacturers have an explicit, and      sometimes intricate, set\r\n of instructions for bedding-in their carbon      ceramic discs.  Iron \r\ndiscs can typically be prepared via a simple      series of stops from \r\n60-80 mph with the brake pad of choice.\r\n\t\u003c\/li\u003e\r\n\u003c\/ul\u003e\u003ch3\u003eCarbon Ceramic is NOT Carbon\/Carbon\u003c\/h3\u003e\u003cp\u003eAt\r\n this stage you may be saying to yourself, \"But I saw that the XYZ \r\nprofessional race cars were running carbon brakes at the track.\"  The \r\ncarbon brakes currently being used in professional racing are \r\n\t\u003ca href=\"http:\/\/en.wikipedia.org\/wiki\/Reinforced_carbon%E2%80%93carbon\"\u003ecarbon\/carbon\u003c\/a\u003e\r\n\t(abbreviated C\/C), which is actually a different material vs. the \r\ncarbon ceramic discs used on road cars.  The carbon ceramic brake discs \r\non road cars are a Carbon Ceramic Matrix (CCM).  In recent times many \r\nprofessional racing series (F1, ALMS, IRL, etc.) have switched to \r\n\t\u003cem\u003ecarbon\/carbon \u003c\/em\u003ebrake\r\n discs in an effort to reduce weight.  Carbon\/Carbon is an outstanding \r\nlightweight material for racing, but requires heat before it starts to \r\ngenerate usable friction.  As such, they're completely ill-suited to a \r\ntypical morning commute in a road car!\r\n\u003c\/p\u003e\u003ch3\u003eIron Disc Benefits\u003c\/h3\u003e\u003cp\u003eSo what can AP Racing J Hook iron discs do for a car previously equipped with carbon ceramic discs?\r\n\u003c\/p\u003e\u003cul\u003e\r\n\t\u003cli\u003e\n\u003cstrong\u003eIncreased airflow and slower heat transfer to other brake components-\u003c\/strong\u003e\r\n\tAP Racing J Hook discs have a unique, high-count vane      design that \r\npromotes airflow, heat evacuation, and rapid cooling.  They don't rely \r\non a large surface area to cool via radiation.  The      iron discs will\r\n move more air than your carbon ceramic's, and as a result they won't   \r\n   heat your brake pads, caliper pistons, and brake fluid up as quickly.\r\n       You'll be able to run longer sessions without brake fade, and \r\nyou'll enjoy      the confidence that comes along with them.  They'll \r\nalso make any      brake ducts that you have on the car more effective \r\nand useful.\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003e\n\u003cstrong\u003eHuge range of compatible brake pad compounds-\u003c\/strong\u003e\r\n\tIron discs will open up a much greater range of      available brake \r\npads.  You'll be able to achieve a different feel,      and tailor your \r\nbrake setup depending on your needs and environment,      whether that \r\nis running an AutoX or the most demanding racetrack in your      area.  \r\nYou'll also likely be paying less per brake pad set than you      were  \r\npreviously, and your pads will last longer.\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003e\n\u003cstrong\u003eInexpensive spare discs-\u003c\/strong\u003e\r\n\tYou'll no longer have to spend thousands of dollars      when it's time\r\n to replace your discs.  AP Racing J Hook's typically      only cost \r\n$300-500 per iron disc ring, so you won't have to stress about      \r\nanything happening to them.  They're inexpensive enough that you can    \r\n  always keep a spare set on hand, so you won't have to worry about any \r\n     brake-related downtime when you're out at the track.\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003e\n\u003cstrong\u003eDurability-\u003c\/strong\u003e\r\n\tIron discs can take a beating.  You can stash your spares in your \r\n     race trailer, and you won't have to worry about handling them, \r\ncovering      them, dinging them, or chipping them when changing your \r\nwheels.\r\n\t\u003c\/li\u003e\r\n\u003c\/ul\u003e\u003cp\u003eAs you can see, although iron discs do come with a\r\n slight weight penalty, they're still the smart choice if you run your \r\ncar hard on the racetrack.  They're the obvious solution that has been \r\nproven countless times on tracks around the world, at all levels of \r\nmotorsport.  The AP Racing J Hook discs in our system are the epitome of\r\n endurance racing components.  They will hold up extremely well to any \r\nabuse you plan to throw at them. These discs have been proven time and \r\nagain in professional racing, winning many races and even championships \r\n(ALMS, Rolex, Grand Am, etc.).\r\n\u003c\/p\u003e\u003cp\u003eThe AP Racing J Hook discs in our system are the epitome of endurance racing components.  They will hold up extremely well to any abuse you plan to throw at them. These discs have been proven time and again in professional racing, winning many races and even championships (ALMS, Rolex, Grand Am, etc.)\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/dsc_27.jpg\"\u003e\r\n\u003c\/p\u003e\u003ch3\u003eTwo-piece Floating Design with Aluminum Hat \u003c\/h3\u003e\u003cp\u003eAs\r\n is the case with most metal, iron brake discs grow substantially when \r\nheated.  As it is heated, a disc expands radially, increasing in \r\ndiameter and circumference.  One-piece disc designs run into problems \r\nwhen this occurs.   Look at the picture below and imagine the disc is \r\nbeing heated on the track.  As the disc expands, the outer edges of the \r\ndisc are pulling away from the center of the disc, but there are no \r\nbuilt-in provisions to allow for that expansion.  The edges of the disc \r\ntherefore pull, lift, and distort, which is called coning.  Now imagine \r\nthat disc vertical on the car, running in your caliper.  Coning directly\r\n impacts the brake pads’ contact with the disc, leading to uneven wear \r\nand tapering, and even a long brake pedal.\r\n\u003c\/p\u003e\u003cp\u003eTwo-piece discs on the \r\nother hand, compensate for the expansion of the disc as it heats.  This \r\nis accomplished by building ‘float’ into either the disc itself, or the \r\ndisc hat\/bell.  In this case, the float is in the disc.  If you look \r\nclosely at the picture below, you can see that the mounting holes for \r\nthe hat attachment bobbins are not round.  They are an oblong shape.  \r\nThese channels allow the hat mounting hardware to slide as the disc is \r\nheated and expands, allowing the disc to run true in the caliper without\r\n distortion.  That means less distortion, stress cracks, and pad taper.\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/oem_disc_heat_expansion_web_3.jpg\" unselectable=\"on\"\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/disc_heat_expansion_web_3.jpg\" unselectable=\"on\"\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/disc_float_cold_web_4.jpg\" unselectable=\"on\"\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/disc_float_hot_web_3.jpg\" unselectable=\"on\"\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/disc_heat_expansion_two_web_4.jpg\" unselectable=\"on\"\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cspan class=\"redactor-invisible-space\"\u003e\u003cspan class=\"redactor-invisible-space\"\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/dsc_37.jpg\"\u003e\u003c\/span\u003e\u003c\/span\u003e\r\n\u003c\/p\u003e\u003ch3\u003eMounting Hardware and Anti-Knockback Spring Clips\u003c\/h3\u003e\u003cp\u003eIf\r\n you look closely at the mounting hardware we use in our Competition \r\nKits, you’ll notice a few details that are often overlooked in lesser \r\nproducts.  These components are specially made for their intended \r\npurpose.  These are not cheap bolts found at your local big box store.  \r\nThey are custom made in the USA for Essex and AP Racing, and they are \r\nthe exact same components we use on professional racing products.\r\n\u003c\/p\u003e\u003cp\u003eAs\r\n discussed above with regards to the piston springs, knockback can be a \r\nserious issue when tracking a car.  In order to help control the lateral\r\n motion of the disc, which pushes the pistons back into the caliper, we \r\nuse an anti-knockback spring clip on every other disc attachment point \r\n(on a ten bolt disc there are five spring clips, while on a twelve bolt \r\ndisc there are six). These spring clips help keep the disc hat and iron \r\nring in alignment, while still allowing the disc to expand and float \r\nradially.  As an added bonus, they prevent the hat and iron disc from \r\nrattling and making noise.\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/boltstack_41.jpg\" unselectable=\"on\"\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/closeup_41.jpg\" unselectable=\"on\"\u003e\r\n\u003c\/p\u003e\u003ch3\u003eHat Design\u003c\/h3\u003e\u003cp\u003eFloating\r\n two-piece discs also have the added benefit of reducing heat conduction\r\n to the hubs and bearings, decreasing wear and tear on these costly \r\ncomponents. The disc hats themselves are manufactured from 6061 \r\nheat-treated billet aluminum, with a hard anodized coating.  This material \r\nwas specifically chosen for its strength at high temperatures, as it \r\nwill be in direct contact with the searing hot iron discs.  The hats \r\nfeature scallops on the underside, to allow for heat evacuation along \r\nthe outer disc face once installed.\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/Shallow_Hat_Bottom_three_quarter_closeup_View_web.jpg\" unselectable=\"on\"\u003e\r\n\u003c\/p\u003e\u003ch3\u003eInternal Vane Quantity and Quality\u003c\/h3\u003e\u003cp\u003eThe\r\n internal vane design on AP J Hook discs is quite a bit different vs. \r\nOEM-style discs and other brands of aftermarket discs. Many OEM discs feature a pillar vane design, which can be thought of \r\nas a group of posts or pillars connecting the two disc halves together (see pic below). \r\n The pillars are not organized linearly from the outside to the inside \r\nof the disc, and turbulence is created as air flows through and among \r\nthem.  Pillar vane discs are therefore not particularly well suited to \r\nheat evacuation.   The goals of a pillar vane design are disc face \r\nstability for low NVH (Noise, Vibration, Harshness), and a low cost of \r\nproduction.  Pillar vanes are non-directional, and the same part number is \r\nused on both sides of the car (again for cost reduction). Other OEM discs feature a straight, non-directional internal vane.  While that type of vane flows more air than a pillar, it does not move nearly as much air as the directional vanes featured in AP Racing's discs.  Having directional vanes means that AP Racing discs are handed.  There is a unique left disc and a right disc in each pair, and they cannot be swapped from side-to-side on the car.  The orientation of the vanes is optimized to spin in a certain direction, pumping the maximum amount of air possible through the disc.  The shape of these internal vanes is also optimized to promote smooth airflow.\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/left_right%20illustration_3.jpg\" unselectable=\"on\"\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/Disc_CutOut_three_quarter_view_WEB.jpg\" unselectable=\"on\"\u003e\r\n\u003c\/p\u003e\u003cp\u003eOEM front disc next to AP Racing J Hook Disc.  A few things to note in these pictures: The AP Racing disc has a much \r\nwider air gap between the disc faces, allowing considerably more airflow\r\n into and through the disc.  The uniform, directional vane design also \r\ncontributes heavily to superior airflow.  \r\n\t\u003cbr\u003e\r\n\u003c\/p\u003e\u003cp\u003eIn addition to having a superior internal vane design, AP Racing \r\ndiscs have far more of\r\n them!  Most aftermarket discs have 30 to 48 vanes. After extensive \r\nCFD and thermal stress analysis, AP designed the J Hook's with a high \r\nvane count (typically 60 to 84 depending on application).  Having more \r\nvanes increases airspeed and heat transfer through the disc, reduces air\r\n recirculation between vanes, and reduces \r\ndeflection at the disc face.  Compared to an OEM-style disc or \r\ncompetitor's 48 vane discs, the 60+ vane discs are less prone to coning,\r\n distortion, and cracking, while \r\nproviding less brake fade, reduced judder, more even pad contact, and a \r\nlonger service life.\r\n\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003c\/em\u003e\r\n\u003c\/p\u003e\u003ch3\u003eExclusive AP Racing J Hook Slot Pattern \u003c\/h3\u003e\u003cp\u003eWhen\r\n you cut a slot or drill a hole in a disc you impact heat transfer. The \r\narea around the slot or hole acts as a cool spot when the disc heats up,\r\n which is not ideal. Ideally, heat is distributed uniformly around the \r\ndisc so it can be hit with the cooling air that is pumping through the \r\ndisc, radiate outwards away from the disc, etc.  Cool spots create \r\nstress risers and increase the likelihood of the disc cracking. They \r\nalso cause the face of the disc to distort unevenly, leading to uneven \r\npad deposits, vibration, and judder.\r\n\u003c\/p\u003e\u003cp\u003eThe OEM discs avoid this \r\nproblem by simply leaving the face blank.  While the risk for NVH goes \r\ndown, so does the pad bite and feel of the disc through the brake \r\npedal.  Competitive aftermarket offerings typically have straight slots,\r\n which tend to leave cool spots across the disc face between the slots.\r\n\t\u003cbr\u003e \u003cstrong\u003e\u003cbr\u003e \u003c\/strong\u003eDuring\r\n exhaustive R\u0026amp;D testing, AP's J Hook design was found to create a \r\nconstant pathway of evenly distorted material on the face of the disc.  \r\nThe hooks are spaced out as evenly as possible both around the \r\ncircumference of the disc, as well as from the inside edge (where the \r\nhat attaches) to outer edge, with a slight overlap to promote even heat \r\ndistribution\/distortion. In addition to reducing cracking, the even \r\nheating of the disc also helps provide an even transfer layer of pad \r\nmaterial on the disc when you bed them in.\r\n\t\u003cbr\u003e \u003cbr\u003e Additionally, the J \r\nHook slot pattern produces a greater number of leading edges for the \r\npads to bite into vs. a traditional curved slot pattern, and \r\nparticularly a plain-faced disc.  While this may lead to slightly more \r\nwhirring or scraping noises from the discs when applying the brakes, the\r\n benefits of more even heat distribution, less propensity to crack, \r\ncleaner pad material transfer during bed-in, and more bite far outweigh \r\nthe slight increase in NVH for the serious enthusiast.\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/jhook_two_web_2.jpg\" unselectable=\"on\"\u003e\r\n\u003c\/p\u003e\u003cp\u003eWith repeated trips to track temps, the OEM drilled discs are much more prone to cracking, especially around the drill hole\r\n\u003c\/p\u003e\u003ch3\u003eComplex Metallurgy Developed Through 50+ Years of Experience \u003c\/h3\u003e\u003cp\u003eAP\r\n Racing has been designing brake components for more than 50 years.  \r\nThey've had their components on cars that have won more than 750 Formula 1 races!  On any given race weekend, AP J Hook discs can be \r\nfound on 75% or more of the NASCAR Sprint Cup grid.  AP has learned from\r\n these experiences, and have developed a proprietary iron alloy with \r\nextreme durability, designed specifically for what you intend to do with\r\n it (flog the hell out of it).  The primary objectives with OEM \r\ndiscs are simple: they must be cheap and easy to produce.  The design \r\nobjectives for these two products are vastly different.\r\n\u003c\/p\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/JHook_WEB.jpg\" unselectable=\"on\"\u003e\u003cp\u003e\r\n\t\u003cstrong\u003e\u003c\/strong\u003e\u003ca href=\"http:\/\/www.essexpartsblog.com\/news\/several-new-AP-racing-brake-kits-for-corvettes#sthash.2LDKgA9r.dpuf\"\u003e\u003c\/a\u003e\r\n\u003c\/p\u003e\u003ch3\u003eDisc Burnishing\/Bedding Service \u003c\/h3\u003e\u003cp\u003eIf\r\n your brake discs aren’t being properly prepared for abuse prior to \r\nflogging them on track, you’re exposing yourself to potential judder, \r\nvibration, and cracking issues.  We all know that prepping your pads and\r\n discs at the track can be difficult.  Doing so wastes time during the \r\nfirst session of the day, and it's a hassle and potentially dangerous \r\nfor other drivers as you go through the procedure.  Track time is \r\nexpensive and tough to come by. The more time you spend behind the wheel\r\n performing an elaborate bed-in procedure, the less time you’ll spend \r\ndoing hot laps.  Performing the procedure on-track also limits its \r\nrepeatability.  You can't control what's going on around you with track \r\nconditions, other drivers, etc., and many track configurations don't \r\nreally lend themselves to the constant start\/stop\/start required to do the\r\n job properly.\r\n\u003c\/p\u003e\u003cp\u003eEssex is now offering a solution via our \r\nprofessional burnishing service.  Previously reserved for our \r\nprofessional racing customers, we are now offering our retail customers \r\nthe option of having the discs in select Competition Brake Kits \r\npre-burnished at our factory.  We burnish thousands of discs for the top\r\n racing teams each year.  After countless hours of experimentation, and \r\nextensive feedback from the top drivers and teams, we can consistently \r\nsqueeze the most reliable performance out of AP Racing's discs.  The \r\nprocedure is incredibly repeatable, as it is performed on a \r\ncomputer-controlled machine by experienced technicians.\r\n\t\u003cstrong\u003e\u003c\/strong\u003e  The cost of our burnishing service is $50 \r\nper disc ($100 per brake kit).\r\n\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDisc burnishing in Ferodo Racing pad \r\ncompound included at no additional charge in our premier Radi-CAL \r\nCompetition Brake Kits (normally $150 per disc pair). \u003c\/strong\u003e\r\n\tIf you are using a brake pad brand other than Ferodo and are interested\r\n in compatible disc burnishing, please contact Essex support prior to \r\npurchase.\u003cbr\u003e\u003c\/p\u003e\u003cp\u003ePlease note that the \u003cem\u003epads\u003c\/em\u003e \r\nyou receive will not be pre-burnished.  In other words, the pads and \r\ndiscs do not have to be a matched set burnished together to reap the \r\nbenefits the procedure has on the discs.  In other words, we will \r\nburnish the discs in the pad compound you choose, they just won't be \r\nburnished with the exact set of pads that will arrive with your kit.\r\n\u003c\/p\u003e\u003cp\u003e\u003ca href=\"http:\/\/www.essexparts.com\/pro-race-services\/patented-brake-disc-bedding--burnishing\" target=\"_blank\"\u003eWatch a brief video of our disc burnishing service here.\u003c\/a\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/discs%20before%20and%20after%20burnish_2.jpg\" unselectable=\"on\"\u003e\r\n\u003c\/p\u003e\u003ch3\u003eLong-term Running Costs and ROI\u003c\/h3\u003e\u003cp\u003eLet's\r\n face it, the GT3 and GT4 are not the most economical cars to run on the\r\n track, and OEM replacement parts are expensive for what they are and \r\nthe capabilities they possess. No matter how good a brake pad or disc \r\nis, it's still a consumable \r\nitem.  They're no different than gasoline.  You beat them \r\nup until they burn up or crack to pieces, then you throw them away.  If \r\nreplacement discs are too expensive, you're always driving in fear, \r\nwaiting to shell \r\nout big bucks for a new set.  While you \r\nobviously want the best product available, you can't afford to pay a \r\nsmall fortune for something you're just going to destroy, which is the \r\nroot of the problem with PCCB discs in particular.  When you do the \r\nmath, \r\nthe long-term value of our iron AP Racing system is tough to beat.    \r\nBelow is a retail price list for OEM brake components:\r\n\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOEM Iron System\u003c\/strong\u003e\u003cbr\u003e Front disc pair= $1631.00\u003cbr\u003eFront caliper pair= $1968.00\u003cbr\u003eFront OEM pads= $352.00\u003cbr\u003eTotal front= $3951.00\u003cbr\u003eRear disc pair= $1510.00\u003cbr\u003eRear caliper pair= $1402.00\u003cbr\u003eRear OEM pads= $343.00\u003cbr\u003eTotal rear= $3255.00\u003cbr\u003eTotal OEM front\/rear car set iron brakes= $7206.00\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eOEM PCCB System\u003c\/strong\u003e\u003cbr\u003e Front disc pair= $10,882.00\u003cbr\u003eFront caliper pair= $2774.00\u003cbr\u003eFront OEM pads= $786.00\u003cbr\u003eTotal front= $14,442.00\u003cbr\u003eRear disc pair= $10,600.00\u003cbr\u003eRear caliper pair= $2136.00\u003cbr\u003eRear OEM pads= $688.00\u003cbr\u003eTotal rear= $13,424.00\u003cbr\u003eTotal OEM front\/rear car set PCCB brakes= $27,866.00\u003cbr\u003e\r\n\u003c\/p\u003e\u003cp\u003eOur complete brake kit is closer in price to the OEM iron components, but our kit is by far the superior investment. One of the best features of our brake systems is that they hold their value extremely well due to their durability, serviceability, and AP Racing's stellar reputation as a top OEM supplier. Our brake kits typically change hands on the used market for about 65-70% of what they cost new. \u003cstrong\u003eThat means you can buy them, enjoy them, beat them up, sell them for thousands of dollars, and still have your fresh OEM brakes sitting in your garage, ready to drop on your car when you're ready to sell it. \u003c\/strong\u003eThat is absolutely \u003ci\u003enot\u003c\/i\u003e the case with OEM brake equipment. If you destroy your calipers, ruin the painted caliper finish, or oxidize or chip your OEM PCCB discs, those components will be worth very little, or even nothing in many cases.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eIn summary, the scenario described above can mean the difference between laying out many thousands of dollars for new brake components when you sell your car (only to hand that money to the new owner) vs. collecting thousands of dollars at the time of sale. \u003c\/strong\u003eIf the new owner prefers the AP Racing setup, you'll still have a fresh set of OEM brakes on the shelf. You'll be able to either factor them into the deal, or sell them another Turbo owner for a handsome sum. Regardless of which brake system the new owner prefers, you still win.\r\n\u003c\/p\u003e\u003ch3\u003eCaliper Brackets \u0026amp; Hardware \u003c\/h3\u003e\u003cp\u003eCaliper\r\n brackets for our kit are machined from steel and anodized for \r\ndurability.  In most of our kits we use heat-treated 6061 T6 billet \r\naluminum.  On this application however, the caliper brackets needed to \r\nbe particularly thin, so we used steel for added strength.   We put in \r\nthe added effort to make them as light as possible however.  All \r\nincluded hardware is of aircraft quality, and identical to what we use \r\nin professional racing.  One of the nice features of our brackets is \r\ntheir cutaway design, which allows for the snug fitment of many \r\ncurrently available brake duct kits.\r\n\u003c\/p\u003e\u003cp\u003eUnanodized prototype brackets shown below\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/essex_proto_991_981_bracket.jpg\"\u003e\r\n\u003c\/p\u003e\u003ch3\u003eBrake Ducting \u003c\/h3\u003e\u003cp\u003eEssex does not recommend aftermarket brake \r\nducts with our Competition Brake Kits.  In our experience, packaging \r\nissues make it nearly impossible to pipe an adequate amount of cooling \r\nair from the nose of the car into the center of the discs.  The duct \r\nhoses are typically too narrow, and there isn't enough room for \r\nproperly-sized hoses to clear the tire in the fender well.  Many systems\r\n also direct cooling air to the incorrect location, which can create \r\nuneven cooling and temperature gradients throughout the disc, which \r\nleads to premature cracking.  Finally, the plates used to attach brake \r\nducts at the wheel hub frequently trap heat against the inner disc face,\r\n creating a systemic temperature \r\n\t\u003ci\u003eincrease\u003c\/i\u003e.  As such, we do not recommend aftermarket brake ducts.\r\n\u003c\/p\u003e\u003cp\u003eIf\r\n your vehicle has an OEM brake duct that dumps air into the wheel well, \r\nand or a series of air deflectors inside the wheel, it is fine to leave \r\nthem installed.  If you have installed your  Essex Designed AP Racing \r\nCompetition Brake Kit, collected data, and believe it is running hotter \r\nthan expected, please contact us to discuss your options.\r\n\u003c\/p\u003e\u003cp\u003e \u003cstrong\u003ePlease also note, DO NOT BOLT ANYTHING BETWEEN THE CALIPER BRACKET AND THE SUSPENSION UPRIGHT!  \u003c\/strong\u003eAny\r\n ears or tabs from a brake duct system bolted between the bracket and \r\nthe upright will malign the caliper from its intended orientation, \r\ncausing potentially serious damage to the entire brake system or car.  \r\nThe bracket should be directly bolted to the upright as intended, with \r\nnothing sandwiched between the two.\r\n\u003c\/p\u003e\u003ch3\u003eSpiegler Stainless Steel Brake Lines \u003c\/h3\u003e\u003cp\u003eOur Competition Kits include a set of the highest quality stainless steel brake lines available.  Spiegler lines have a wide range\r\n of features not available in competitive offerings.  Below are just a \r\nfew.  For complete details please visit the \r\n\t\u003ca href=\"https:\/\/www.essexparts.com\/brake-lines\"\u003eSpiegler page\u003c\/a\u003e on our site.\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/SpieglerLines.jpg\" unselectable=\"on\"\u003e\r\n\u003c\/p\u003e\u003ctable\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e\u003cstrong\u003eFeature\u003c\/strong\u003e\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e\u003cstrong\u003eBenefit\u003c\/strong\u003e\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eAll components manufactured in USA and Europe\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eStringent and consistent quality control\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eStress-free Torsion Fitting System\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eAllows 360 degree rotation of banjo fitting for correct alignment and strain reduction\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eAbrasion resistant coating\/sheath\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eEliminates snagging and chafing\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eAircraft quality stainless steel fittings and bolts\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eSuperior strength, longevity, and safety\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eHeavy gauge, tightly woven stainless steel braid\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eEliminates line swell, more consistent feel\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eDu Pont PTFE- Teflon® lining\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eReduces line expansion and provides greater durability\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eDOT compliant\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eQuality assurance, road legal\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eWide range of colors\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eAllows for personalization\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eStandard and custom designs shipped in 48 hours\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eNo more waiting around for lines to show up\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eFull testing battery on all parts, with lifetime warranty\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003ePurchase and drive with confidence\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\u003cbr\u003e                \u003cdiv id=\"pspecs\" class=\"pdetail\"\u003e\n\u003ch3\u003eAdvantages Over OEM Brake System\u003c\/h3\u003e\n\u003cp\u003eOur CP9450\/380mm Radi-CAL Competition Brake Kit offers our customers the following advantages over the OEM brake system:\r\n\u003c\/p\u003e\n\u003cul\u003e\r\n\t\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003eJewel-like ENP Caliper finish is incredibly durable and easy to clean\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\r\n\t\u003cli\u003eAP Racing Radi-CAL calipers are the stiffest, lightest,\r\n     and most technologically advanced calipers available at any price\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003eCalipers use a commonly\r\n     available brake pad shape\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003eVentilated, domed back, stainless steel\r\n     pistons keep heat out of the brake fluid and provide an ultra-firm\r\n     pedal\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003eMitigation of pad knockback via anti-knockback springs\r\n     behind the caliper pistons\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003eStainless steel caliper hardware for a long caliper\r\n     service life under frequent pad change conditions\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003eHigh temperature, low drag seals that will hold up to\r\n     track temps= less rebuilding and longer service life\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003eNo dust boots to burn up\u003c\/li\u003e\r\n\t\u003cli\u003eSimple pad change with one bolt, no caliper removal required\u003c\/li\u003e\r\n\t\u003cli\u003eLifetime professional caliper rebuilding support by\r\n     Essex (at a fee)- pull off your calipers, send them to us, we clean,\r\n     inspect, and rebuild them\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003eAvailable disc burnishing service ensures that your kit\r\n     arrives ready to be installed and driven hard immediately\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003eChampionship winning, 72 vane, fully floating, AP\r\n     Racing J Hook racing discs\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003eAnti-knockback\/anti-rattle disc attachment hardware\u003c\/li\u003e\r\n\t\u003cli\u003eReplacement iron disc rings available at an extremely\r\n     competitive replacement price\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003eDisc metallurgy specifically designed to handle the\r\n     temps typically seen on track offer a long service life\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003eHighest quality, Spiegler stainless steel brake line\r\n     with clear sheath that reduces compliance over OEM rubber design\r\n\t\u003c\/li\u003e\r\n\u003c\/ul\u003e\n\u003ctable\u003e  \u003ccolgroup\u003e\n\u003ccol\u003e  \u003ccol\u003e  \u003ccol\u003e  \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e   \u003ctd\u003eCaliper\u003c\/td\u003e   \u003ctd\u003eAP Racing CP9450-2\/3S4L\u003c\/td\u003e   \u003ctd\u003eOE Porsche 992.2 Carrera \/ Carrera T \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e   \u003ctd\u003eWeight no Pads\u003c\/td\u003e   \u003ctd\u003e4.85 lbs.\u003c\/td\u003e   \u003ctd\u003e~6.0 lbs.\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e   \u003ctd rowspan=\"2\"\u003ePiston Sizes\u003c\/td\u003e   \u003ctd\u003e27.0mm x 2\u003c\/td\u003e   \u003ctd rowspan=\"2\"\u003e32.0mm x4\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e   \u003ctd\u003e31.8mm x 2\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e   \u003ctd\u003ePiston Area\u003c\/td\u003e   \u003ctd\u003e27.2 cm^2\u003c\/td\u003e   \u003ctd\u003e \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e   \u003ctd\u003eInlet Thread\u003c\/td\u003e   \u003ctd\u003eM10x1.0\u003c\/td\u003e   \u003ctd\u003e \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e   \u003ctd\u003eMounting Type\u003c\/td\u003e   \u003ctd\u003eRadial\u003c\/td\u003e   \u003ctd\u003e \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e   \u003ctd\u003eMtg. Centers\u003c\/td\u003e   \u003ctd\u003e152mm\u003c\/td\u003e   \u003ctd\u003e \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e   \u003ctd\u003eMtg. Offset\u003c\/td\u003e   \u003ctd\u003e44mm\u003c\/td\u003e   \u003ctd\u003e \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e   \u003ctd\u003ePad thickness\u003c\/td\u003e   \u003ctd\u003e16.75mm\u003c\/td\u003e   \u003ctd\u003e \u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e   \u003ctd\u003eDisc\u003c\/td\u003e   \u003ctd\u003eCP5772-1016\/1017GA\u003c\/td\u003e   \u003ctd\u003eOE Iron Disc\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e   \u003ctd\u003eType\u003c\/td\u003e   \u003ctd\u003e2-piece floating\u003c\/td\u003e   \u003ctd\u003e1-piece\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e   \u003ctd\u003eWeight\u003c\/td\u003e   \u003ctd\u003e19.1 lbs.\u003c\/td\u003e   \u003ctd\u003e23.4 lbs.\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e   \u003ctd\u003eDiameter\u003c\/td\u003e   \u003ctd\u003e380mm\u003c\/td\u003e   \u003ctd\u003e350mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e   \u003ctd\u003eThickness\u003c\/td\u003e   \u003ctd\u003e32mm\u003c\/td\u003e   \u003ctd\u003e28mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e   \u003ctd\u003eRadial Depth\u003c\/td\u003e   \u003ctd\u003e50mm\u003c\/td\u003e   \u003ctd\u003e 60mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e   \u003ctd\u003eNo. of Vanes\u003c\/td\u003e   \u003ctd\u003e72\u003c\/td\u003e   \u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e                \u003cdiv id=\"pbed\" class=\"pdetail\"\u003e\n\u003ch2\u003eEssex Parts Disc and Pad Burnishing Services\u003c\/h2\u003e\n\u003cp\u003eIf\r\n your brake discs aren’t being properly prepared for abuse prior to \r\nflogging them on track, you’re exposing yourself to potential judder, \r\nvibration, and cracking issues.  We all know that prepping your pads and\r\n discs at the track can be difficult.  Doing so wastes time during the \r\nfirst session of the day, and it's a hassle and potentially dangerous \r\nfor other drivers as you go through the procedure.  Track time is \r\nexpensive and tough to come by. The more time you spend behind the wheel\r\n performing an elaborate bed-in procedure, the less time you’ll spend \r\ndoing hot laps.  Performing the procedure on-track also limits its \r\nrepeatability.  You can't control what's going on around you with track \r\nconditions, other drivers, etc., and many track configurations don't \r\nreally lend themselves to the constant start\/stop\/start required to do the\r\n job properly.\r\n\u003c\/p\u003e\n\u003cp\u003eEssex offers convenient solutions to this problem with our Disc and Pad Burnishing Services.  Previously reserved for our \r\nprofessional racing customers, we are now offering our retail Competition Brake Kit customers \r\nthe option of having their discs and pads arrive pre-burnished, so they are ready to bolt on and drive right out of the box. At our facility outside Charlotte, NC, we burnish thousands of discs and pads for elite race teams each year (NASCAR, IMSA, etc.). With countless hours of experimentation, and \r\nextensive feedback from top drivers and teams, we know how to consistently \r\nsqueeze the most reliable performance out of AP Racing discs and Ferodo Racing pads. Our burnishing procedure is performed by experienced technicians on a computer-controlled machine with the utmost precision and repeatability. Let Essex save you the time and hassle of trying to bed discs and pads on the car, so you can focus on enjoying your time at the track!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003ePad and Disc Burnishing Service Pricing when bundled with a Competition Brake Kit:\u003c\/u\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eDisc Burnishing\u003c\/strong\u003e- normally $150 \/ pair - discounted with brake kit to $100 \/ pair. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePad Burnishing\u003c\/strong\u003e- normally $95 \/ set - discounted with brake kit to $75 \/ set. \u003c\/p\u003e\n\u003cp\u003eNot all \"pre-bedded\" brake pads are created equal. Several \r\nmanufacturers use the term, but instead of properly bedding-in, they are\r\n simply baking or \r\n\"scorching\" their pads, which heats them but does not apply any \r\npressure. One can think of scorching as an incomplete form of \r\nbedding, or the step prior to bedding the pad on a brake disc.  \r\nScorching improves the likelihood of a successful bedding process by \r\nreducing the chance of uneven pad deposits on the disc face.  Many race \r\npads today are being marketed as \"pre-bedded,\" but unless the pad has \r\nliterally been run on a disc face, they are only scorched.\r\n\t\u003cbr\u003e\r\n\u003c\/p\u003e\n\u003cp\u003eAll Ferodo Racing pads are scorched as part of the manufacturing \r\nprocess, and certain applications undergo an even higher-temperature \r\n\"super-bake\" process as well. But the Essex  Pre-Burnishing Service \r\ntakes pad preparation a step further. \u003cbr\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBenefits of pre-burnished brake pads from Essex:\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProvides the most consistent and durable performance from the pads\u003c\/li\u003e\n\u003cli\u003eRemoves the binding resin from the friction surface and acts as a \r\nfinal cure, strengthening the      friction material and helps prevent \r\ncracking\/crumbling\u003c\/li\u003e\n\u003cli\u003eThe patented Essex      bedding machine uses a computer-controlled \r\nprocess, producing much more      consistent results than on-car bedding\r\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhen burnishing new discs, the process is much easier with \r\npre-burnished pads. They tend to produce a smoother transfer layer of \r\nfriction material on the      discs, and do not require temperatures as \r\nhigh as when bedding with green      (unburnished) pads. There is also \r\nless chance of developing judder from improperly      burnished discs. \u003cu\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/u\u003e Since worn discs are not perfectly flat, drive a few      easy laps to “mate” the uneven disc surface with the new pads.\r\n\u003c\/p\u003e\n\u003cdiv class=\"video-container\"\u003e\r\n\t\u003ciframe src=\"https:\/\/www.essexparts.com\/\/www.youtube.com\/embed\/FG8Sg0jGKwQ\" allowfullscreen=\"\" frameborder=\"0\"\u003e\r\n\t\u003c\/iframe\u003e\r\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\r\n\u003c\/p\u003e\n\u003cp\u003eIf you'd rather have a go at preparing your discs and pads yourself, please watch the video below:\r\n\u003c\/p\u003e\n\u003cdiv class=\"video-container\"\u003e\r\n\t\u003ciframe src=\"https:\/\/www.essexparts.com\/\/www.youtube.com\/embed\/pdPX6rzuINc\" allowfullscreen=\"\" frameborder=\"0\"\u003e\r\n\t\u003c\/iframe\u003e\r\n\u003c\/div\u003e\n\u003c\/div\u003e                \u003cdiv id=\"pwfi\" class=\"pdetail\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.essexparts.com\/wheels\/forgeline-wheels\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/forgeline_banner_2_resized.jpg\" alt=\"Forgeline Wheels from Essex\"\u003e\u003cbr\u003e\u003c\/a\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/13-99-00063_porsche911_rear.pdf\"\u003eComplete Kit Installation Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eConfirmed wheels that fit without a spacer:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/wct_porsche_992_turbo_s_rear_9449-380.pdf\"\u003eWheel Fitment Template\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\r\n\r\nHow to use the wheel fitment template:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/wheel_fitment_template_in_wheel_example_23.jpg\"\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e                \u003cdiv id=\"psa\" class=\"pdetail\"\u003e\n\u003ch3\u003eSpare Iron Brake Disc Rings\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.essexparts.com\/ap-racing-j-hook-competition-disc-replacment-ring-380x32mm-right-hand\" target=\"_blank\"\u003e13.05.10048 (CP5772-1016GA) 380x32mm RH replacement iron disc\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.essexparts.com\/ap-racing-j-hook-competition-disc-replacment-ring-380x32mm-left-hand\" target=\"_blank\"\u003e13.05.10049 (CP5772-1017GA) 380x32mm LH replacement iron disc\u003c\/a\u003e\u003cbr\u003e\r\n\u003c\/p\u003e\n\u003ch3\u003eDisc Attachment Hardware\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.essexparts.com\/12bolt-disc-hardware-kit\" target=\"_blank\"\u003e12-bolt disc attachment hardware kit (enough for one disc)\u003c\/a\u003e\r\n\u003c\/p\u003e\n\u003ca href=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/CompetitionDiscAssembly.pdf\" target=\"_blank\"\u003eIron Ring Replacement Assembly Instructions\u003c\/a\u003e\u003ca href=\"https:\/\/www.essexparts.com\/12bolt-disc-hardware-kit\"\u003e\u003c\/a\u003e\u003cp\u003e\u003ca title=\"CP5773 D54 installation drawing\" href=\"http:\/\/www.essexparts.com\/media\/downloads\/cp5773-102%7E3CD.PDF\" target=\"_blank\" data-mce-href=\"http:\/\/www.essexparts.com\/media\/downloads\/cp5773-102~3CD.PDF\"\u003e\u003c\/a\u003e\r\n\u003c\/p\u003e\n\u003ca title=\"CP5060 Hawk Perf Ceramic\" href=\"http:\/\/www.essexparts.com\/shop\/brake-pads\/hb109-710-perf-ceramic-alcon.html\" target=\"_blank\"\u003e\u003c\/a\u003e\u003ch3\u003eBrake Pads\u003cem\u003e\u003c\/em\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe\r\n basic pad shape for the CP94XX caliper was created by AP Racing \r\nmany years ago, and is used by a wide range of racing calipers today.  \r\nThey're available in just about every popular racing compound on the \r\nmarket.  That means you’ll never end up in a pinch without pads.\r\n\u003c\/p\u003e\n\u003cp\u003eBelow is a drawing of the basic pad shape:\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/frp3018.jpg\"\u003e\u003cspan class=\"redactor-invisible-space\"\u003e\u003cstrong\u003e\u003c\/strong\u003eDimensions= 132.4 x 50 x 16.7 mm\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\r\n\u003c\/p\u003e\n\u003cp\u003eThe pad shapes that will fit the CP94XX caliper can be \r\nfound below.  For the brands we sell, we have provided hyperlinks in the\r\n chart below to each of their compound offerings.  Many other manufacturers sell this same basic pad shape.\r\n  However, they are frequently offered in a variety of radial depths \r\n(heights) and thicknesses.\r\n\t\u003cstrong\u003e For Essex GT3 and GT4 rear applications, the pad must have a 16.75-17.0mm thickness and a D50mm radial depth.  \u003c\/strong\u003eEssex\r\n cannot guarantee fitment for the brands we don't sell.  We're merely \r\noffering these suggestions based on our research, and believe they are \r\nthe appropriate part numbers. Prior to purchasing any of them, you \r\nshould verify fitment with either the pad \r\nmanufacturer or your installer\/technician.\u003c\/p\u003e\n\u003ctable\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e\u003cstrong\u003eShape Number\u003c\/strong\u003e\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e\u003cstrong\u003eCompounds: Click Each Below to   View and Purchase\u003c\/strong\u003e\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eAlcon\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eAP Racing\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eCP3215D50\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eBrembo\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003eB52\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eCarbotech\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eCirco\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eCL Brakes\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e5004W50T17\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eCobalt\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\u003cbr\u003e\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eEBC\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eEndless\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eFerodo\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eFRP216\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\r\n\t\u003cp\u003e\u003ca href=\"https:\/\/www.essexparts.com\/ferodo-ds2500-brake-pads770\" target=\"_blank\"\u003eDS2500\u003c\/a\u003e, \u003ca href=\"https:\/\/www.essexparts.com\/ferodo-ds1-11-brake-pads773\" target=\"_blank\"\u003eDS1.11\u003c\/a\u003e, \u003ca href=\"https:\/\/www.essexparts.com\/ferodo-frp216g-ds312-brake-pads\" target=\"_blank\"\u003eDS3.12\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eHawk\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eHB110.654\u003cbr\u003e\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eMintex\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003ePagid\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e1361\u003cbr\u003e\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003ePFC\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003e7767\u003cbr\u003e\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003ePorterfield\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eProject Mu\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003eF1067\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eRaybestos\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\t\u003ctd\u003e\r\n\t\t\u003cp\u003eWilwood\r\n\t\t\u003c\/p\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\t\u003ctd\u003e\n\u003cbr\u003e\r\n\t\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\n\u003c\/div\u003e                \u003cdiv id=\"pfaq\" class=\"pdetail\"\u003e\n\u003ch2\u003eBBK FAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Where can I buy one of your brake kits?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA: \u003c\/strong\u003eEssex\r\n sells directly to both retail customers and through an extensive \r\nnetwork of wholesale dealers\/resellers across North America.You can \r\ncheck our Dealer Locator tool to find a local reseller.The other option \r\nis to place an order directly on our website, or call us to place an \r\norder by phone.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do Essex Designed Competition Brake Kits come with pads?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003eA:\r\n No.Brake pads are like ice cream, they come in many different flavors, \r\nand everyone likes something different.We could have included a cheap \r\nset of pads like some other manufactures offer, but that won't help our \r\ncustomers.Your best bet is to get our recommendation on which pad is \r\nright for your usage conditions.You can read more about brake pad \r\nselection in our article \"\u003ca href=\"http:\/\/www.essexparts.com\/storage\/wysiwyg\/how%20to%20choose%20the%20best%20street%20and%20track%20brake%20pads_3.pdf\" target=\"_blank\"\u003eHow to Choose the Best Street and Track Brake Pads\u003c\/a\u003e.\"\r\n\u003c\/p\u003e\n\u003cp\u003ePlease\r\n note that we do offer discounted pads at the time you purchase our \r\nbrake kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do you have a brake pad that works well on both the street and the track?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e\r\n\tNo such pad exists.There will always be a compromise when running a pad\r\n in an environment for which it was not specifically designed.See the \r\ntwo questions below for more details.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is it okay to run street pads on the racetrack?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e\r\n\tNo!Street pads are designed to chase groceries, not lap times.If you \r\noverheat a street pad beyond its max operating temperature, you risk not\r\n only destroying those pads, but your discs as well.Essex always \r\nrecommends using street pads on the street, and race\/track pads on the \r\ntrack.Please see \"\u003ca href=\"http:\/\/www.essexparts.com\/storage\/wysiwyg\/how%20to%20choose%20the%20best%20street%20and%20track%20brake%20pads_3.pdf\" target=\"_blank\"\u003eHow to Choose the Best Street and Track Brake Pads\u003c\/a\u003e\" for a more detailed explanation and guidance on pad choice.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is it okay to run race pads on the street?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e\r\n\tMost race pads are designed to work optimally at high temperatures.As \r\nsuch, they many times don't have good cold bite, making them a poor \r\nchoice for street use.Even if they do have cold bite, they will likely \r\nmake a lot of squealing and screeching noises, produce heavy dust, and \r\nchew your discs up in a hurry when driven around cold.Please see \"\u003ca href=\"http:\/\/www.essexparts.com\/storage\/wysiwyg\/how%20to%20choose%20the%20best%20street%20and%20track%20brake%20pads_3.pdf\" target=\"_blank\"\u003eHow to Choose the Best Street and Track Brake Pads\u003c\/a\u003e\" for a more detailed explanation and guidance on pad choice.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How much brake fluid do I need when installing my brake kit?\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eA:\u003c\/strong\u003e\r\n\tEssex recommends three 500ml bottles of brake fluid.That will be enough\r\n to bleed the brakes during the initial install, and have a little bit \r\nleft over if a second brake bleed is required.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Which brake fluid is best for me?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003eAP\r\n Racing offers five different brake fluids to meet all customer needs \r\nand budgets.If you're tracking your car regularly, you should be looking\r\n at AP Racing R2, R3, or R4.The main difference between those fluids is \r\ntheir boiling points.Please check the product page for each to see which\r\n best matches your needs and budget.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is it okay to just buy your front-only brake kit?What about the rears?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA: \u003c\/strong\u003eOur\r\n front brake kits are designed to very closely mimic the OEM torque \r\noutput on the front axle.That is accomplished by carefully sizing the \r\ndiscs and caliper pistons.For example, if we increase the disc diameter \r\nin our kit vs. stock, we decrease the overall piston area to produce the\r\n same overall torque output as the factory setup.As such, installing our\r\n front kit on your car will only have a negligible impact on brake \r\nbias.In most cases, the shift in brake bias is only in the 2-3% range.To\r\n put that in perspective, installing a more aggressive brake pad \r\ncompound in your factory front calipers would typically have a greater \r\nimpact on brake bias than installing our front kit while keeping the OEM\r\n front pad compound.\r\n\u003c\/p\u003e\n\u003cp\u003eOn most front-engine sports cars, the \r\nfront brakes are taxed much more heavily than the rear brakes.That's why\r\n the front brakes are almost always larger, and why you go through 2-3 \r\nsets of front pads and discs for every set of rears you burn up at the \r\ntrack.The fronts do a disproportionate amount of work, and as such, they\r\n are the most critical component to upgrade.On many platforms, rear \r\nbrake upgrades offer diminishing returns.The rear factory components \r\ntend to be smaller and lighter than the front components.As such, \r\nswitching to AP Racing calipers and discs don't usually offer the \r\ndramatic unsprung weight savings that they do on the front.Since the \r\nrears tend to not run as hot, simply running good race pads and \r\nstainless steel lines on the rear will solve or prevent any rear brake \r\nissues.\r\n\u003c\/p\u003e\n\u003cp\u003eOn a rear-engine car, the rear brakes do a \r\nproportionately higher amount of work than on a front-engine car.As \r\nsuch, brake wear tends to be more balanced on the front and rear, and \r\nrear upgrades can be more relatively more important to the overall \r\nsystem performance.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will your brake kit mess with my ABS, stability control, torque vectoring, or disrupt my front to rear brake bias\/balance?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e\r\n\tNo!Since our systems closely mimic the factory brake torque output on a\r\n given axle as described above, they have no noticeable impact on ABS, \r\nstability control, torque vectoring, etc.The brake pedal will feel much \r\nbetter due to lower compliance, and the brakes will take a far greater \r\nbeating for considerably longer.You won't have any wonky ABS issues \r\nhowever.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I have to modify my spindle or do any fabrication to install your brake kit?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e\r\n\tIn 99% of all cases, no.On a few of our kits you may have to grind down\r\n some spindle casting flash to get a caliper bracket to seat \r\nproperly.This can be done with a hand file or Dremel.You don't need to \r\nbe an engineer or feel intimidated about installing one of our \r\nkits.Since we don't use universal caliper brackets or hats, our kits are\r\n all custom creations designed specifically for your car.That means when\r\n they are installed properly, they will integrate seamlessly with the \r\nvehicle.All of that said, if you have any concerns about doing the job, \r\nit will always be safer to have the install completed by a certified \r\nmechanic.\r\n\u003c\/p\u003e\n\u003cp\u003eIfyou look at the \"Wheel Fitment \u0026amp; Installation\" \r\ntab on the product page, you can download our install manual and see \r\nwhat is involved.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I have to change my master cylinder to use your kit?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Absolutely not.Our kits bolt on at the wheel end with simple hand tools.No other modifications are required.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will your brake kit significantly shorten my stopping distances with all else held equal? \u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA: No!\u003c\/strong\u003eTires\r\n stop your car.Brakes turn the energy of the spinning brake discs into \r\nheat.The primary function of a properly designed big brake kit to \r\nwithstand the heat encountered during the repetitive and heavy use of \r\nthe brakes.Anyone who sells you a brake kit specifically to shorten your\r\n stopping distances is lying to you.If you want shorter stopping \r\ndistances, buy stickier tires.  If you want your brakes to feel exactly \r\nthe same on the last lap of the day as they did on the first lap, buy \r\nour brake kit.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: I saw that your brake kits reduce unsprung weight…will that help me?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e\r\n\tYes!Reducing unsprung weight not only improves braking performance, but\r\n also translates to superior acceleration and cornering as well.As is \r\nthe case with switching to a lighter wheel and tire combo, installing a \r\nlighter brake package can improve your car's overall performance \r\nenvelope.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: I installed my brake kit, but my pedal is still a bit mushy.Why?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e\r\n\tYou still have air trapped somewhere in your brake system.A closed \r\nhydraulic system is based around brake fluid that is not compressible.As\r\n such, your pedal should be firm with relatively short travel after \r\ninstall.Sometimes air bubbles get trapped in your system however, and \r\nthose air bubbles are compressible.During install, moving your caliper \r\naround at different angles, or tapping it lightly with a rubber mallet \r\ncan work the air bubbles out to a bleed screw.Air bubbles also sometimes\r\n get trapped in your ABS system.Make sure to cycle the ABS via a scan \r\ntool or manually before doing another bleed.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I retract the caliper pistons when changing pads?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA: \u003c\/strong\u003eWe\r\n recommend using a small block of soft wood (pine) covered with a rag or\r\n cloth to press the pistons back into the caliper.  Make sure no hard or\r\n rough surface is making contact with the caliper pistons.Leave a pad in\r\n one side of the caliper while pressing all of the pistons on the other \r\nside back into the caliper at the same time.\r\n\u003c\/p\u003e\n\u003cp\u003eOn four piston \r\ncalipers, some people flip their brake pad vertical and use it to lever \r\nthe pads back into their bores.We do not recommend doing so, as it may \r\ndamage the pad, the disc against which you are levering, or the pistons \r\nthemselves.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use \"Speedbleeder\" bleed screws in my AP Racing calipers?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e\r\n\tEssex does not recommend any bleed screw other than the ones that came \r\nwith your AP Racing calipers (which vary in size \u0026amp; thread pitch \r\ndepending on the caliper).\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I get a Competition Brake Kit with calipers of a different color? \u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e\r\n\tIn most cases, are racing calipers are only sold with a hard anodized \r\ngrey finish.The only exception are our kits that use the Pro5000R \r\nRadi-CAL calipers.They can be purchased with silver painted calipers for\r\n an additional $300.If you're dead set on red or black painted calipers,\r\n please check out our AP Racing Factory Big Brake Kits.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are spare parts available and reasonably priced?\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eA: \u003c\/strong\u003eBeing\r\n a company brimming with racers and track junkies, we're very aware of \r\nthe costs of running a typical track event schedule for the year...event\r\n fees, gas, hotels, tires, etc. It all adds up quickly. When we created \r\nour Competition Brake Kit product line, availability and long-term \r\nrunning costs were of paramount concern.We did a couple of things to \r\naddress these issues.First we're buying loads of spares and keeping them\r\n on the shelf in our warehouse in Charlotte, NC.Buying in bulk also \r\nbrings the cost down, so we can pass them along at prices that may \r\nsurprise you for a premium European brand.When you look at the \r\nspecification of our discs vs. the competition, AP's racing heritage, \r\nand the longevity you'll get from them, they are an incredible \r\nbargain.Most of the competitive discs on the market are 48 vanes or \r\nless, weigh more, have less optimized vane design, inferior metallurgy, \r\nand have never been proven under the same conditions as the AP Racing \r\ndiscs.Many of our race customers have run an entire season or more on a \r\nsingle set of discs.\r\n\t\u003cbr\u003e \u003cbr\u003e Pads are another area of concern for us. \r\nWe know that brake pads are a very personal choice, and that everyone \r\nwants to run something different. As such, the calipers we're using in \r\nour systems use some of the most commonly available pad shapes on the \r\nmarket, produced by just about every manufacturer in every flavor under \r\nthe sun.\r\n\t\u003cbr\u003e \u003cbr\u003e We also stock spare pistons, seals, springs, and other hardware components so they're available when needed in a pinch.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will your brake kit clear my wheels without a spacer?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e\r\n\tEssex cannot guarantee wheel fitment, and we will not be held \r\nresponsible for a kit not fitting behind particular wheels.That said, we\r\n do offer some tools to assist our customers in this area.\r\n\u003c\/p\u003e\n\u003cp\u003eWe \r\nprovide a downloadable wheel fitment template or every brake kit we \r\nsell.All you have to do is download it, print it to scale (check with a \r\nruler), and stick it inside the wheel in question.Another option would \r\nbe to have your wheel seller check for you using the template.\r\n\u003c\/p\u003e\n\u003cp\u003eIf\r\n we've had a customer confirm fitment of our kit with a particular \r\nwheel, we also list it in the wheel fitment tab on the product detail \r\npage for that particular kit.Again, these details are provided by \r\ncustomers, and we cannot guarantee their validity.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Which side of the vehicle is left, and which is right?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e\r\n\tIf you're sitting in the driver seat of a USDM vehicle, you are on the \r\nleft side\/driver side.The other side is the passenger side\/right side.\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Which disc is the left hand disc, and which is the right?\u003c\/strong\u003e\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003eTo illustrate further\r\n\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFull technical article continues at essexparts.com.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"AP Racing","offers":[{"title":"No Brake Pads \/ No Tension Kit \/ No Finishing","offer_id":53516771721498,"sku":"13.01.10213-ENP","price":6399.0,"currency_code":"USD","in_stock":true},{"title":"No Brake Pads \/ No Tension Kit \/ Discs Pre-burnished in Ferodo Compound + Add Pad Burnishing","offer_id":53516776276250,"sku":"13.01.10213-ENP-4341-6307","price":6574.0,"currency_code":"USD","in_stock":true},{"title":"No Brake Pads \/ No Tension Kit \/ Discs Pre-burnished in Ferodo Compound","offer_id":53516776309018,"sku":"13.01.10213-ENP-4341","price":6499.0,"currency_code":"USD","in_stock":true},{"title":"No Brake Pads \/ No Tension Kit \/ Add Pad Burnishing","offer_id":53516776341786,"sku":"13.01.10213-ENP-6307","price":6474.0,"currency_code":"USD","in_stock":true},{"title":"No Brake Pads \/ CP9450 Pad Tension Kit (x2) \/ No Finishing","offer_id":53516776374554,"sku":"13.01.10213-ENP-4340","price":6539.0,"currency_code":"USD","in_stock":true},{"title":"No Brake Pads \/ CP9450 Pad Tension Kit (x2) \/ Discs Pre-burnished in Ferodo Compound + Add Pad Burnishing","offer_id":53516776407322,"sku":"13.01.10213-ENP-4340-4341-6307","price":6714.0,"currency_code":"USD","in_stock":true},{"title":"No Brake Pads \/ CP9450 Pad Tension Kit (x2) \/ Discs Pre-burnished in Ferodo Compound","offer_id":53516776440090,"sku":"13.01.10213-ENP-4340-4341","price":6639.0,"currency_code":"USD","in_stock":true},{"title":"No Brake Pads \/ CP9450 Pad Tension Kit (x2) \/ Add Pad Burnishing","offer_id":53516776472858,"sku":"13.01.10213-ENP-4340-6307","price":6614.0,"currency_code":"USD","in_stock":true},{"title":"Ferodo DS2500 \/ No Tension Kit \/ No Finishing","offer_id":53516776505626,"sku":"13.01.10213-ENP-4158","price":6649.0,"currency_code":"USD","in_stock":true},{"title":"Ferodo DS2500 \/ No Tension Kit \/ Discs Pre-burnished in Ferodo Compound + Add Pad Burnishing","offer_id":53516776538394,"sku":"13.01.10213-ENP-4158-4341-6307","price":6824.0,"currency_code":"USD","in_stock":true},{"title":"Ferodo DS2500 \/ No Tension Kit \/ Discs Pre-burnished in Ferodo Compound","offer_id":53516776571162,"sku":"13.01.10213-ENP-4158-4341","price":6749.0,"currency_code":"USD","in_stock":true},{"title":"Ferodo DS2500 \/ No Tension Kit \/ Add Pad Burnishing","offer_id":53516776603930,"sku":"13.01.10213-ENP-4158-6307","price":6724.0,"currency_code":"USD","in_stock":true},{"title":"Ferodo DS2500 \/ CP9450 Pad Tension Kit (x2) \/ No Finishing","offer_id":53516776636698,"sku":"13.01.10213-ENP-4158-4340","price":6789.0,"currency_code":"USD","in_stock":true},{"title":"Ferodo DS2500 \/ CP9450 Pad Tension Kit (x2) \/ Discs Pre-burnished in Ferodo Compound + Add Pad Burnishing","offer_id":53516776669466,"sku":"13.01.10213-ENP-4158-4340-4341-6307","price":6964.0,"currency_code":"USD","in_stock":true},{"title":"Ferodo DS2500 \/ CP9450 Pad Tension Kit (x2) \/ Discs Pre-burnished in Ferodo Compound","offer_id":53516776702234,"sku":"13.01.10213-ENP-4158-4340-4341","price":6889.0,"currency_code":"USD","in_stock":true},{"title":"Ferodo DS2500 \/ CP9450 Pad Tension Kit (x2) \/ Add Pad Burnishing","offer_id":53516776735002,"sku":"13.01.10213-ENP-4158-4340-6307","price":6864.0,"currency_code":"USD","in_stock":true},{"title":"Ferodo DS1.11 \/ No Tension Kit \/ No Finishing","offer_id":53516776767770,"sku":"13.01.10213-ENP-4159","price":6649.0,"currency_code":"USD","in_stock":true},{"title":"Ferodo DS1.11 \/ No Tension Kit \/ Discs Pre-burnished in Ferodo Compound + Add Pad Burnishing","offer_id":53516776800538,"sku":"13.01.10213-ENP-4159-4341-6307","price":6824.0,"currency_code":"USD","in_stock":true},{"title":"Ferodo DS1.11 \/ No Tension Kit \/ Discs Pre-burnished in Ferodo Compound","offer_id":53516776833306,"sku":"13.01.10213-ENP-4159-4341","price":6749.0,"currency_code":"USD","in_stock":true},{"title":"Ferodo DS1.11 \/ No Tension Kit \/ Add Pad Burnishing","offer_id":53516776866074,"sku":"13.01.10213-ENP-4159-6307","price":6724.0,"currency_code":"USD","in_stock":true},{"title":"Ferodo DS1.11 \/ CP9450 Pad Tension Kit (x2) \/ No Finishing","offer_id":53516776898842,"sku":"13.01.10213-ENP-4159-4340","price":6789.0,"currency_code":"USD","in_stock":true},{"title":"Ferodo DS1.11 \/ CP9450 Pad Tension Kit (x2) \/ Discs Pre-burnished in Ferodo Compound + Add Pad Burnishing","offer_id":53516776931610,"sku":"13.01.10213-ENP-4159-4340-4341-6307","price":6964.0,"currency_code":"USD","in_stock":true},{"title":"Ferodo DS1.11 \/ CP9450 Pad Tension Kit (x2) \/ Discs Pre-burnished in Ferodo Compound","offer_id":53516776964378,"sku":"13.01.10213-ENP-4159-4340-4341","price":6889.0,"currency_code":"USD","in_stock":true},{"title":"Ferodo DS1.11 \/ CP9450 Pad Tension Kit (x2) \/ Add Pad Burnishing","offer_id":53516776997146,"sku":"13.01.10213-ENP-4159-4340-6307","price":6864.0,"currency_code":"USD","in_stock":true},{"title":"Ferodo DSUNO \/ No Tension Kit \/ No Finishing","offer_id":53516777029914,"sku":"13.01.10213-ENP-4160","price":6649.0,"currency_code":"USD","in_stock":true},{"title":"Ferodo DSUNO \/ No Tension Kit \/ Discs Pre-burnished in Ferodo Compound + Add Pad Burnishing","offer_id":53516777062682,"sku":"13.01.10213-ENP-4160-4341-6307","price":6824.0,"currency_code":"USD","in_stock":true},{"title":"Ferodo DSUNO \/ No Tension Kit \/ Discs Pre-burnished in Ferodo Compound","offer_id":53516777128218,"sku":"13.01.10213-ENP-4160-4341","price":6749.0,"currency_code":"USD","in_stock":true},{"title":"Ferodo DSUNO \/ No Tension Kit \/ Add Pad Burnishing","offer_id":53516777160986,"sku":"13.01.10213-ENP-4160-6307","price":6724.0,"currency_code":"USD","in_stock":true},{"title":"Ferodo DSUNO \/ CP9450 Pad Tension Kit (x2) \/ No Finishing","offer_id":53516777193754,"sku":"13.01.10213-ENP-4160-4340","price":6789.0,"currency_code":"USD","in_stock":true},{"title":"Ferodo DSUNO \/ CP9450 Pad Tension Kit (x2) \/ Discs Pre-burnished in Ferodo Compound + Add Pad Burnishing","offer_id":53516777226522,"sku":"13.01.10213-ENP-4160-4340-4341-6307","price":6964.0,"currency_code":"USD","in_stock":true},{"title":"Ferodo DSUNO \/ CP9450 Pad Tension Kit (x2) \/ Discs Pre-burnished in Ferodo Compound","offer_id":53516777259290,"sku":"13.01.10213-ENP-4160-4340-4341","price":6889.0,"currency_code":"USD","in_stock":true},{"title":"Ferodo DSUNO \/ CP9450 Pad Tension Kit (x2) \/ Add Pad Burnishing","offer_id":53516777292058,"sku":"13.01.10213-ENP-4160-4340-6307","price":6864.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/9450_380_enp_rev2_2.png?v=1795030828","url":"https:\/\/race-centric.com\/products\/ap-racing-by-essex-radi-cal-enp-competition-brake-kit-rear-cp9450-380mm-porsche-992","provider":"Racecentric","version":"1.0","type":"link"}