{"product_id":"ap-racing-j-hook-competition-disc-replacement-ring-372x34mm-left-hand","title":"AP Racing J Hook Competition Disc Replacement Ring (372x34mm)- Left Hand","description":"\u003cp\u003eAP Racing J Hook discs are the epitome of endurance\r\n racing components.  They will hold up extremely well to any abuse you \r\nplan to throw at them. These discs have been proven time and again in \r\nprofessional racing, winning many races and even championships (ALMS, \r\nRolex, Grand Am, etc.)\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/CP6084-103GA.jpg\"\u003e\u003c\/p\u003e\u003ch3\u003e\u003c\/h3\u003e\u003ch3\u003eInternal Vane Quantity and Quality\u003c\/h3\u003e\u003cp\u003eThe\r\n\r\n internal vane design on AP J Hook discs is quite a bit different vs. \r\nOEM-style discs and other brands of aftermarket discs. Many OEM discs \r\nfeature a pillar vane design, which can be thought of \r\nas a group of posts or pillars connecting the two disc halves together \r\n(see pic below). \r\n The pillars are not organized linearly from the outside to the inside \r\nof the disc, and turbulence is created as air flows through and among \r\nthem.  Pillar vane discs are therefore not particularly well suited to \r\nheat evacuation.   The goals of a pillar vane design are disc face \r\nstability for low NVH (Noise, Vibration, Harshness), and a low cost of \r\nproduction.  Pillar vanes are non-directional, and the same part number \r\nis \r\nused on both sides of the car (again for cost reduction). Other OEM \r\ndiscs feature a straight, non-directional internal vane.  While that \r\ntype of vane flows more air than a pillar, it does not move nearly as \r\nmuch air as the directional vanes featured in AP Racing's discs.  Having\r\n directional vanes means that AP Racing discs are handed.  There is a \r\nunique left disc and a right disc in each pair, and they cannot be \r\nswapped from side-to-side on the car.  The orientation of the vanes is \r\noptimized to spin in a certain direction, pumping the maximum amount of \r\nair possible through the disc.  The shape of these internal vanes is \r\nalso optimized to promote smooth airflow.\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/left_right%20illustration_3.jpg\"\u003e\u003c\/p\u003e\u003cp\u003eIn addition to having a superior internal vane design, AP Racing \r\ndiscs have far more of\r\n them!  Most aftermarket discs have 30 to 48 vanes. After extensive \r\nCFD and thermal stress analysis, AP designed the J Hook's with a high \r\nvane count (typically 60 to 84 depending on application).  Having more \r\nvanes increases airspeed and heat transfer through the disc, reduces air\r\n recirculation between vanes, and reduces \r\ndeflection at the disc face.  Compared to an OEM-style disc or \r\ncompetitor's 48 vane discs, the 60+ vane discs are less prone to coning,\r\n distortion, and cracking, while \r\nproviding less brake fade, reduced judder, more even pad contact, and a \r\nlonger service life.\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/Disc_CutOut_three_quarter_view_WEB.jpg\"\u003e\r\n\u003c\/p\u003e\u003ch3\u003e\n\u003cem\u003e\u003c\/em\u003eExclusive AP Racing J Hook Slot Pattern \u003c\/h3\u003e\u003cp\u003eWhen\r\n you cut a slot or drill a hole in a disc you impact heat transfer. The \r\narea around the slot or hole acts as a cool spot when the disc heats up,\r\n which is not ideal. Ideally, heat is distributed uniformly around the \r\ndisc so it can be hit with the cooling air that is pumping through the \r\ndisc, radiate outwards away from the disc, etc.  Cool spots create \r\nstress risers and increase the likelihood of the disc cracking. They \r\nalso cause the face of the disc to distort unevenly, leading to uneven \r\npad deposits, vibration, and judder.\r\n\u003c\/p\u003e\u003cp\u003eThe OEM discs avoid this \r\nproblem by simply leaving the face blank.  While the risk for NVH goes \r\ndown, so does the pad bite and feel of the disc through the brake \r\npedal.  Competitive aftermarket offerings typically have straight slots,\r\n which tend to leave cool spots across the disc face between the slots.\r\n\t\u003cbr\u003e \u003cstrong\u003e\u003cbr\u003e \u003c\/strong\u003eDuring\r\n exhaustive R\u0026amp;D testing, AP's J Hook design was found to create a \r\nconstant pathway of evenly distorted material on the face of the disc.  \r\nThe hooks are spaced out as evenly as possible both around the \r\ncircumference of the disc, as well as from the inside edge (where the \r\nhat attaches) to outer edge, with a slight overlap to promote even heat \r\ndistribution\/distortion. In addition to reducing cracking, the even \r\nheating of the disc also helps provide an even transfer layer of pad \r\nmaterial on the disc when you bed them in.\r\n\t\u003cbr\u003e \u003cbr\u003e Additionally, the J \r\nHook slot pattern produces a greater number of leading edges for the \r\npads to bite into vs. a traditional curved slot pattern, and \r\nparticularly a plain-faced disc.  While this may lead to slightly more \r\nwhirring or scraping noises from the discs when applying the brakes, the\r\n benefits of more even heat distribution, less propensity to crack, \r\ncleaner pad material transfer during bed-in, and more bite far outweigh \r\nthe slight increase in NVH for the serious enthusiast.\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/jhook_two_web_4.jpg\"\u003e\u003c\/p\u003e\u003ch3\u003eComplex Metallurgy Developed Through 50+ Years of Experience \u003c\/h3\u003e\u003cp\u003eAP\r\n\r\n Racing has been designing brake components for more than 50 years.  \r\nThey've had their components on cars that have won more than 750 Formula\r\n 1 races!  On any given race weekend, AP J Hook discs can be \r\nfound on 75% or more of the NASCAR Sprint Cup grid.  AP has learned from\r\n these experiences, and have developed a proprietary iron alloy with \r\nextreme durability, designed specifically for what you intend to do with\r\n it (flog the hell out of it).  The primary objectives with OEM \r\ndiscs are simple: they must be cheap and easy to produce.  The design \r\nobjectives for these two products are vastly different.\r\n\u003c\/p\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/JHook_WEB.jpg\"\u003e\u003cp\u003e\r\n\t\u003cstrong\u003e\u003c\/strong\u003e\r\n\u003c\/p\u003e\u003ch3\u003eDisc Burnishing\/Bedding Service \u003c\/h3\u003e\u003cp\u003eIf\r\n your brake discs aren’t being properly prepared for abuse prior to \r\nflogging them on track, you’re exposing yourself to potential judder, \r\nvibration, and cracking issues.  We all know that prepping your pads and\r\n discs at the track can be difficult.  Doing so wastes time during the \r\nfirst session of the day, and it's a hassle and potentially dangerous \r\nfor other drivers as you go through the procedure.  Track time is \r\nexpensive and tough to come by. The more time you spend behind the wheel\r\n performing an elaborate bed-in procedure, the less time you’ll spend \r\ndoing hot laps.  Performing the procedure on-track also limits its \r\nrepeatability.  You can't control what's going on around you with track \r\nconditions, other drivers, etc., and many track configurations don't \r\nreally lend themselves to the constant start\/stop\/start required to do the\r\n job properly.\r\n\u003c\/p\u003e\u003cp\u003eEssex is now offering a solution via our \r\nprofessional burnishing service.  Previously reserved for our \r\nprofessional racing customers, we are now offering our retail customers \r\nthe option of having the discs in select Competition Brake Kits \r\npre-burnished at our factory.  We burnish thousands of discs for the top\r\n racing teams each year.  After countless hours of experimentation, and \r\nextensive feedback from the top drivers and teams, we can consistently \r\nsqueeze the most reliable performance out of AP Racing's discs.  The \r\nprocedure is incredibly repeatable, as it is performed on a \r\ncomputer-controlled machine by experienced technicians.\r\n\t\u003cstrong\u003e\u003c\/strong\u003e  The cost of our burnishing service is $50 \r\nper disc ($100 per brake kit).\r\n\u003c\/p\u003e\u003cp\u003ePlease note that the \u003cem\u003epads\u003c\/em\u003e \r\nyou receive will not be pre-burnished.  In other words, the pads and \r\ndiscs do not have to be a matched set burnished together to reap the \r\nbenefits the procedure has on the discs.  In other words, we will \r\nburnish the discs in the pad compound you choose, they just won't be \r\nburnished with the exact set of pads that will arrive with your kit.\r\n\u003c\/p\u003e\u003cp\u003e\u003ca target=\"_blank\" href=\"https:\/\/www.essexparts.com\/pro-race-services\/patented-brake-disc-bedding--burnishing\"\u003eWatch a brief video of our disc burnishing service here.\u003c\/a\u003e\r\n\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/discs%20before%20and%20after%20burnish_2.jpg\"\u003e\r\n\u003c\/p\u003e\u003ch3\u003eReasonable Replacement Cost \u003c\/h3\u003e\u003cp\u003eLet's\r\n face it, no matter how good a brake disc is, it's still a consumable \r\nitem.  They're no different than brake pads or gasoline.  You beat them \r\nup until they crack to pieces, then you throw them away.  If replacement\r\n iron is too expensive, you're always driving in fear, waiting to shell \r\nout big bucks for a new set.  Despite having the most expansive set of \r\nfeatures on the market, spare AP Racing J Hook's are completely affordable.\r\n\u003c\/p\u003e\u003cp\u003eGoing to the track is expensive!   \r\nEvent entrance fees, hotels, fuel, and tires all add up.  While you \r\nobviously want the best product available, you can't afford to pay a \r\nsmall fortune for something you're just going to destroy.  You can buy a\r\n cheap set of discs for every event, have relentless heat issues, \r\nand find yourself constantly swapping them out.  When you do the math, \r\nthe long-term value of the AP J Hook's is tough to beat.  You'll enjoy \r\nall the benefits without breaking the bank, and you'll spend more time \r\ndriving and less time wrenching.\r\n\u003c\/p\u003e\u003cp\u003eElite level teams choose AP \r\nRacing discs because they know the work has been done to provide the \r\nbest available product at any price level.  The AP J Hook is a\r\n direct derivative of AP's vast racing experience.  You can buy with \r\nconfidence knowing that you're getting the best product available at any\r\n price point.  A note of caution however: the J Hook design is often \r\nimitated, and there are a number of lesser quality imitations on \r\nmarket.  Before purchasing, make sure you are getting an authentic AP \r\nRacing J Hook.\r\n\u003c\/p\u003e                                \u003cdiv id=\"pbed\" class=\"pdetail\"\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eIf\r\n your brake discs aren’t being properly prepared for abuse prior to \r\nflogging them on track, you’re exposing yourself to potential judder, \r\nvibration, and cracking issues.  We all know that prepping your pads and\r\n discs at the track can be difficult.  Doing so wastes time during the \r\nfirst session of the day, and it's a hassle and potentially dangerous \r\nfor other drivers as you go through the procedure.  Track time is \r\nexpensive and tough to come by. The more time you spend behind the wheel\r\n performing an elaborate bed-in procedure, the less time you’ll spend \r\ndoing hot laps.  Performing the procedure on-track also limits its \r\nrepeatability.  You can't control what's going on around you with track \r\nconditions, other drivers, etc., and many track configurations don't \r\nreally lend themselves to the constant start\/stop\/start required to do the\r\n job properly.\r\n\u003c\/p\u003e\n\u003cp\u003eEssex is now offering a solution via our \r\nprofessional burnishing service.  Previously reserved for our \r\nprofessional racing customers, we are now offering our retail customers \r\nthe option of having the discs in select Competition Brake Kits \r\npre-burnished at our factory.  We burnish thousands of discs for the top\r\n racing teams each year.  After countless hours of experimentation, and \r\nextensive feedback from the top drivers and teams, we can consistently \r\nsqueeze the most reliable performance out of AP Racing's discs.  The \r\nprocedure is incredibly repeatable, as it is performed on a \r\ncomputer-controlled machine by experienced technicians.\r\n\t\u003cstrong\u003e\u003c\/strong\u003e  The cost of our burnishing service is $50 \r\nper disc ($100 per brake kit).\r\n\u003c\/p\u003e\n\u003cp\u003ePlease note that the \u003cem\u003epads\u003c\/em\u003e \r\nyou receive will not be pre-burnished.  In other words, the pads and \r\ndiscs do not have to be a matched set burnished together to reap the \r\nbenefits the procedure has on the discs.  In other words, we will \r\nburnish the discs in the pad compound you choose, they just won't be \r\nburnished with the exact set of pads that will arrive with your kit.\r\n\u003c\/p\u003e\n\u003cdiv class=\"video-container\"\u003e\r\n\t\u003ciframe src=\"https:\/\/www.essexparts.com\/\/www.youtube.com\/embed\/FG8Sg0jGKwQ\" allowfullscreen=\"\" frameborder=\"0\"\u003e\r\n\t\u003c\/iframe\u003e\r\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\r\n\u003c\/p\u003e\n\u003cp\u003eIf you'd rather have a go at preparing your discs yourself, please watch the video below:\r\n\u003c\/p\u003e\n\u003cdiv class=\"video-container\"\u003e\r\n\t\u003ciframe src=\"https:\/\/www.essexparts.com\/\/www.youtube.com\/embed\/pdPX6rzuINc\" allowfullscreen=\"\" frameborder=\"0\"\u003e\r\n\t\u003c\/iframe\u003e\r\n\u003c\/div\u003e\n\u003c\/div\u003e                                \u003cdiv id=\"psa\" class=\"pdetail\"\u003e\u003cdiv\u003e\u003cdiv\u003e\n\u003ch3\u003eDisc Attachment Hardware\u003c\/h3\u003e\n\u003cp\u003e\u003ca target=\"_blank\" href=\"https:\/\/www.essexparts.com\/12bolt-disc-hardware-kit\"\u003e12-bolt disc attachment hardware kit (enough for one disc)\u003c\/a\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca target=\"_blank\" href=\"https:\/\/www.essexparts.com\/storage\/wysiwyg\/CompetitionDiscAssembly.pdf\"\u003eIron Ring and Aluminum Hat Assembly Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cstrong\u003e\u003ch4\u003eTorque specs for this disc and hardware assembly= 124 lb-in\u003c\/h4\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e                                \u003cdiv id=\"previews\" class=\"pdetail\"\u003e\n                    \u003ca href=\"https:\/\/www.essexparts.com\/review\/2747\" target=\"_blank\" class=\"btn ilb\"\u003eLeave a Review\u003c\/a\u003e\n                    \u003cdiv class=\"clear\"\u003e \u003c\/div\u003e\n\n                    \n                                    \u003c\/div\u003e\n                                        \u003c!-- end product details --\u003e\n    \u003c!-- end container --\u003e\n\u003c!-- end product additional --\u003e\n\n\u003cmeta name=\"_token\" content=\"I5VkraKiRaY0ZPvr4H9fNpUyp9ZtnuCBcjRV72HC\"\u003e\n\n\n    \n        \u003c!-- \/End Main Layout --\u003e\n                    \u003cdiv id=\"footer\"\u003e\n    \u003cdiv class=\"container\"\u003e\n        \n        \u003cdiv class=\"contact\"\u003e\n            \u003cdiv class=\"cms-block\"\u003e\n\u003cp\u003e\r\n\t125 Hampton Court\r\n\t\u003cbr\u003e\r\n\tCramerton, NC 28032\r\n\t\u003cbr\u003e\r\n\t\u003cstrong\u003eP:\u003c\/strong\u003e\u003ca onclick=\"ga('send', 'event', { eventCategory: 'general', eventAction: 'click', eventLabel: 'call', eventValue: 1});\" href=\"tel:704-824-6030\" value=\"+17048246030\" target=\"_blank\"\u003e704.824.6030\u003c\/a\u003e\r\n\t\u003cbr\u003e\r\n\t\u003ca href=\"tel:704-824-7300\" value=\"+17048247300\" target=\"_blank\"\u003e\u003c\/a\u003e\r\n\u003c\/p\u003e\n\u003cp\u003eApplication: Track\u003c\/p\u003e\n\u003cp\u003ePart number: 13.05.10053.\u003c\/p\u003e\n\u003cp\u003eConfirm fitment for your application before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"AP Racing","offers":[{"title":"No Finishing","offer_id":53513459695898,"sku":"13.05.10053","price":549.0,"currency_code":"USD","in_stock":true},{"title":"Disc Burnishing - Ferodo Pad Compound","offer_id":53513460187418,"sku":"13.05.10053-1759","price":624.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5105\/5642\/files\/7177-351-1.jpg?v=1794996261","url":"https:\/\/race-centric.com\/products\/ap-racing-j-hook-competition-disc-replacement-ring-372x34mm-left-hand","provider":"Racecentric","version":"1.0","type":"link"}