Motorsport Hardware Conical seat to Ball seat Adapter

Conical seat to Ball seat adapter

Each kit consists comes with 16 or 20pcs depending on the option selected. For different quantities, please email sales@motorsporthardware.com

• Converts 60 degree conical seat nuts to R13 ball seat
• Can be used with all Motorsport Hardware standard conical and extended race nuts
• Can be used with all thread sizes: 12×1.5, 14×1.5, and 14×1.25
• Inserts between wheel and conical nut
• Manufactuered from hardended steel
• Zinc plated
• Outer diameter: 22.8mm, Inner diameter: 15.2mm, Height: 6.3mm

Tips for use:

• To ensure safe use, when installing, make sure that you get at least 6.5turns when tightening nut
• Re-check torque after first 20-100 miles of service and re-torque as required to 85-88ft/lbs